• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.129-129
• /
• 2017

열전재료는 열에너지를 전기에너지로 또는 전기에너지를 열에너지로 직접 변환하는데 가장 널리 사용되는 재료이다. $Bi_2Te_3$계 열전 재료는 400K 이하의 비교적 저온 영역에서 높은 성능지수(Dimensionless Figure of merit, ZT($={\alpha}2{\sigma}T/{\kappa}$, ${\alpha}$: 제백계수, ${\sigma}$: 전기전도도, T: 절대온도, ${\kappa}$: 열전도도))를 나타내는 열전재료이며 자동차 시트나 정수기 등에 응용되고 있다. 열전모듈은 제조시 수십 개에서 수백 개 이상의 n형 및 p형 열전소자를 알루미나($Al_2O_3$)와 같은 세라믹 기판(substrate) 상에 접합된 동 전극 위에 전기적으로 서로 직렬로 접합시켜 제조한다. 기존의 열전모듈의 제조방법에는 동 전극 위에 위에 Sn합금 분말과 플럭스(flux)의 혼합물인 솔더페이스트를 스크린 인쇄법을 사용하여 동 전극에 도포한 다음, 그 위에 열전소자를 얹고 약 520K의 열풍을 가하여 솔더를 용융시켜 열전소자와 동 전극을 접합시킨다. 스크린 인쇄법에서는 인쇄 압력이 일정하지 않으면, 솔더페이스트 층의 두께가 균일하지 않게 되어 열전소자 접합부의 불량을 유발시킨다. 그러나 열모듈은 단 하나의 접합 불량이 모듈 전체의 열전변환성능에 심각한 영향을 줄 수 있기 때문에 본 연구에서는 이러한 문제점을 해결하기 위해, 솔더페이스트를 도포하지 않고 열전소자를 직접 동 전극과 접합할 수 있는 방법을 고안하였다. 무전해도금을 이용한 니켈층을 형성시킨 $Bi_2Te_3$계 열전소자 표면에 약 $50{\mu}m$의 주석도금층을 전기도금법을 구사하여 형성시켰다. 그 후, wire cutting을 통하여 $3mm{\times}3mm{\times}3mm$의 크기로 절단한 주석도금된 열전소자를 동 전극에 얹고 1.1KPa의 압력을 가하면서 523K의 핫플레이트 위에서 3분간 방치하여 직접(direct) 열압착 접합을 실시하였다. 접합부의 단면을 SEM을 이용하여 관찰한 결과, 동 전극과 열전소자 사이의 계면에 용융 후 응고된 주석층이 결함없이 균일하게 형성된 양호한 접합부를 관찰할 수 있었다. 따라서, 솔더페이스트를 이용하지 않고, 열전소자 표면에 주석도금을 실시한 후, 동 전극과 직접 열압착 본딩을 실시하는 방법은 균일한 접합계면을 얻을 수 있는 새로운 공정으로 기대된다.

• The Journal of the Acoustical Society of Korea
• /
• v.24 no.4
• /
• pp.202-209
• /
• 2005

The rapid development of digital media and communication network urgently brings about the need of data certification technology to protect IPR (Intellectual property right). This paper proposed a new watermarking method for embedding owner's audio signal. Because this method uses an audio signal as a watermark to be embedded, it is very useful to claim the ownership aurally. And it has the advantage of restoring audio signal modified and especially removed by image removing attacks by applying our LBX(Linear Bit-expansion) interleaving. Three basic stages of our watermarking include: 1) Encode . analogue owner's audio signal by PCM and create new digital audio watermark, 2) Interleave an audio watermark by our LBX; and 3) Embed the interleaved audio watermark in the low frequency band on DTn (Discrete Haar Wavelet Transform) of image. The experimental results prove that this method is resistant to lossy JPEG compression as standard image compression and especially to cropping and rotation which remove a part of Image.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.10
• /
• pp.58-71
• /
• 1999

When the same image is displayed in many different devices, the reproduced colors are not same due to the differences in the gamut between devices. Therefore, many gamut mapping method were proposed to solve this problem. In this paper, color discrimination enhancement gamut mapping method using color distribution rearrangement is proposed to reduce the unnecessary distortions by compression mapping and to minimize the decrease of color discrimination by clipping method. The proposed method constructs color distribution, the 3-dimension array of input image's colors. if the maximum of color distribution is within the boundary of printer gamut. the colors are mapped to the same colors. Otherwise, out-of-gamut colors are compressed into the printer gamut with minimum distortion. Consequently, the printer output image was highly consistent with the corresponding monitor image and had an enhanced color discrimination in region where high chroma varied linearly.

• The korean journal of orthodontics
• /
• v.26 no.2 s.55
• /
• pp.197-204
• /
• 1996

This study was performed to mark the criteria of the eathetic smile that was necessary to improve the esthetic problem in oral maxillo-facial region. The facial straight photographs of 62 adults(30 males, 32 females : 19-24 years old) in resting position and during smile were taken. The measurements and proportion of lip-teeth relationship during smile were statistically analyzed with photogrammetry. The following results wow obtained : 1. In the evaluation of the change of lips, smile line ratio was 0.93, buccal corridor ratio was 0.63, and smile symmetry ratio was 0.96. 2. The width of mouth during smile was 1.31 times of the width inthe resting position and 0.48 times of face width. 3. The upper lip height during smile was 0.69 times of the height in the resting position and the lower lip height during smile was 0.93 times of the height in the resting position. 4. The mean exposed lenght of upper central incisor was 9.96mm. Maxillary incisor exposure was significantly correlated with the upper lip change ratio, mouth width change ratio, and buccal corridor ratio.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.3
• /
• pp.859-870
• /
• 1997

Computerized map reading system is one of the most important application areas in the image processing.A map databaes can be used for a wide range of scial activities such as narural resource assessment,regional plan-ming,and reaffic nabigation system. The road segments,however,are extracted as briken in the area where they are overlapped and interupted by chracters and symbols.Few approaches have been taken to complete road segnents interupted by map symbols.In this paper,a movel approach for the extracation and completion of road segements interupted by map symbols is proposed using neural networks.The system is applied to 1/25,000 scaled maps published by the Grographical Survey Unstitute of Ministry of Construction of Korea.It will be shown that the system can extract and reconstruct road segmetns for the various areas of maps sucessfully.

• KSBB Journal
• /
• v.9 no.2
• /
• pp.165-173
• /
• 1994

In this paper we have described the structural characterization of recombinant bovine somatotropin produced in Escherichia coli. Recombinant bovine somatotropin consists of 191 amino acid residues with a calculated molecular weight of 21,802 Da. For fragmentation of recombinant bovine somatotropin, we have used trypsin, Staphylococcus aureus V8 pretease, CNBr, and mild acid hydrolysis method. Digestion and cleavage with these proteases and chemicals yielded peptides of various size for amino acid sequence determination. The N-terminal sequence analysis was carried out up to thirty residues. Because the design of the recombinant bovine somatotropin gene for expression was such that the coding sequence begins with an initiation codon, AUG, before Ala, the first amino acid of bovine somatotropin, we could expect the initial amino acid as N-formyl Met. But the first amino acid of this protein, expressed in E. coli cells as inclusion bodies, was Ala. And the amino acid composition of RP-HPLC purified recombinant bovine somatotropin was determined and no essencial difference was observed. The amino acid sequence of the recombinant bovine somatotropin was identical to that predicted from its recombinant gene. There was no processing or replacement of amino acid residues in recombinant bovine somatotropin expressed in E. coli. The hydropathy plot of recombinant bovine somatotropin revealed a hydrophobic region at the NH2-terminus and hydrophilic region at the COOH-terminus. The E. coli expression system is thought to be valuable for the expression of recombinant bovine somatotropin because protein was processed to remove the N-terminal Met residue by methionyl-aminopeptidase autonomously.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.4
• /
• pp.311-316
• /
• 2020

The purpose of this study is to compare fatigue, stress and quality of sleep between good sleep quality and poor sleep quality. Fatigue, stress and quality of sleep were assessed using three questionnaires; fatigue severity scale(FSS), Perceived stress scale(PSS), and Pittsburgh sleep quality index(PSQL). As a result of the study, the higher stress(22.2 vs. 19.0, p=.000) and poorer quality of sleep(11.2 vs. 5.7, p=.000) were observed between good sleep quality and poor sleep quality groups. Our finding show that time of going to bed and stress level influenced quality of sleep.

• Journal of KIISE:Software and Applications
• /
• v.29 no.1_2
• /
• pp.20-29
• /
• 2002

The composite stock cutting problem is to allocate rectangular and/or irregular patterns onto a large composite stock sheet of finite dimensions in such a way that the resulting scrap will be minimized. In this paper, the distributed simulated annealing with the new cost error tolerant spatial decomposition is applied to the composite stock cutting problem in MPI environments. The cost error tolerant scheme relaxes synchronization and chooses small perturbations on states asynchronously in a dynamically changed stream length to keep the convergence property of the sequential annealing. This paper proposes the efficient data structures for representation of patterns and their affinity relations and also shows how to determine move generations, annealing parameters, and a cost function. The spatial decomposition method is addressed in detail. This paper identifies that the final quality is not degraded with almost linear speedup. Composite stock shapes are not constrained to convex polygons or even regular shapes, but the rotations are only allowed to 2 or 4 due to its composite nature.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.12 no.6
• /
• pp.233-240
• /
• 2008

This paper presents an experimental study on the air contents and the chloride penetration in offshore concrete depending on the types of forms. Three types of concretes(plain, MSF, and FA concretes) with four kinds of forms(wood, coating wood, steel, and polypropylene film) were investigated. The test results show that the air contents in the concrete cured with steel and polypropylene forms were higher than those with wood and coating wood forms. The concrete with wood forms has the least air content. The variation of chloride ingress time was large depending on the types of forms on the same concrete, i.e. 13.2, 20.3, and 17.7% for Plain, MSF, and FA concretes, respectively. Consequently, the surface conditions of forms should be considered for design of durable concrete.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.22 no.1
• /
• pp.5-10
• /
• 2012

In general, the fabrications of the LEDs with mesa structure are performed grown by MOCVD method. In order to etch and separate each chips, the LEDs are passed the RIE and scribing processes. The RIE process using plasma dry etching occur some problems such as defects, dislocations and the formation of dangling bond in surface result in decline of device characteristic. The SAG method has attracted considerable interest for the growth of high quality GaN epi layer on the sapphire substrate. In this paper, the SAG method was introduced for simplification and fabrication of the high quality epi layer. And we report that the size of selective area do not affect the characteristics of original LED. The diameter of SAG circle patterns were choose as 2500, 1000, 350, and 200 ${\mu}m$. The SAG-LEDs were measured to obtain the device characteristics using by SEM, EL and I-V. The main emission peaks of 2500, 1000, 350, and 200 ${\mu}m$ were 485, 480, 450, and 445 nm respectively. The chips of 350, 200 ${\mu}m$ diameter were observed non-uniform surface and resistance was higher than original LED, however, the chips of 2500, 1000 ${\mu}m$ diameter had uniform surface and current-voltage characteristics were better than small sizes. Therefore, we suggest that the suitable diameter which do not affect the characteristic of original LED is more than 1000 ${\mu}m$.