• Ecology and Resilient Infrastructure
• /
• v.8 no.4
• /
• pp.194-203
• /
• 2021

With the recent increase in maintenance works on water and sewer pipes as well as district heating supply pipes, pavement cutting work using pavement cutter is on the rise. The pavement cutting operation generates considerable dust (cutting sludge) as well as noise; therefore, it is necessary to apply eco-friendly technologies that have low noise and dust recovery capability. Thus far, various equipment for recovering dust have been developed; however, there is a limitation in that the environmental friendliness is not quantified. Therefore, in this study, we developed a low-noise, dust-recovery type pavement cutter that can fundamentally remove the causes of environmental hazards such as noise and dust and evaluated the eco-friendliness of the pavement cutting process performed by this cutter. To this end, an integrated water cooling-sludge recovery system composed of a vacuum device and a sludge suction unit was developed, and the developed system was applied to a pavement cutter. Subsequently, the developed equipment was applied to the test bed, and data related to its eco-friendliness were collected and evaluated. The results showed that the cutting sludge recovery rate of the developed equipment was greater than 83%, the noise level was approximately 82 - 83 dB, and the sound power level was 115 dB. The results of this study will be used as basic data to develop improved pavement cutters in the future with improved cutting sludge recovery performance and lower noise.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2001.11b
• /
• pp.121-126
• /
• 2001

본 논문에서는 절단 전력 제어를 사용하는 위성통신 시스템에서 부호율을 채널 상황에 따라 적응시켜 최대의 전송 효율을 얻는 하이브리드 ARQ 타입1 부호율 제어 기법을 제안한다. 제안된 기법의 성능을 분석하기 위하여 먼저 하이브리드 ARQ 타입 1 시스템에서 부호율을 채널 상황에 따라 적응적으로 제어했을 때의 전송 효율과 패킷 오율을 유도한다. 또한, 유도된 패킷 오율식으로부터 절단 전력 제어에서 필요한 목적 수신 SNR값을 사용되는 각 부호율에 대해 구하고, 전송 효율을 최대화하는 최적의 부호율 제어변수를 효율적으로 구할 수 있는 방식을 제안한다. 전송효율 측면에서 분석한 결과 제안된 방법이 기존의 방식에 비하여 우수한 성능을 보여줄 수 있음을 확인하였다.

• Journal of the Korean Data and Information Science Society
• /
• v.20 no.3
• /
• pp.467-474
• /
• 2009

There are many situations arising in reliability engineering and biomedical science where failure of a subsystem increases the failure rate of other subsystem under shared load models. In this paper, the maximum likelihood estimates and the modified maximum likelihood estimates of mean time to failure and reliability function for shared load model with guarantee time are obtained by using censored system life data. Some illustrative examples are included.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.21 no.48
• /
• pp.153-164
• /
• 1998

본 논문은 2-상태 시스템의 신뢰도 계산을 위하여 Heidtmann[3]이 제시한 가역 알고리즘을 부울 대수를 사용하여 경로집합으로부터 절단집합을 유도하거나, 역으로 절단집합으로부터 경로집합을 유도함으로서 효율성을 입증하였으며, 포함-불포함 공식(inclusion-exclusion formula)과 추축 분해법칙(pivotal decomposition rule)을 이용하여 직·병렬구조 및 복합구조의 신뢰도를 계산할 수 있는 알고리즘을 개발, 분석하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.11
• /
• pp.3066-3073
• /
• 2009

Joint paths of master and branch pipes are induced mathematically for many kinds of joint patterns between both pipes in 3-axis pipe profile-cutting machines. By compensating them with a kerf width, the real cutting paths are determined, and their CL-data are generated, and the tool paths generated by CL-data are verified by a ghost function. A bevelling of welds is implemented through tilting a cutting torch in the $\beta$-axis direction for 8 sections in the chuck rotation of $\alpha$-axis. A PLC controls simultaneously position and velocity in a real time for $\alpha$, X, $\beta$-axis by loading CL-data generated. We developed the PLC-controlled 3-axis pipe profile-cutting system which can cut a master or branch pipe along the cutting path and simultaneously do a bevelling process.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1992.10a
• /
• pp.271-274
• /
• 1992

본 논문은 판재상에 부품을 자동배치 하고 이를 최적으로 절단할 수 있도록 NC 프로그램을 자동 생성해 주는 네스팅 소프트웨어를 PC에서 구현한 내용을 기술하고 있다. 본 네스팅 소프트웨어에서는 부품의 자동배치에 비트 프로세싱 처리를 이용함으로써 계산 시간과 메모리 소모를 줄였으며 자유곡선을 포함한 2차원의 부품 내부에 홀이 있는 경우도 부품이 배치가 가능토록 하였다. 그리고 GUI 를 이용한 모든 처리를 WISIWTC 방식으로 이루어지도록 하였으며 부품 절단을 위한 각종 유틸리티와 한글을 사용한 도움 기능의 제공으로 사용자가 쉽게 사용 할 수 있도록 설계되었다.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 1998.03a
• /
• pp.89-92
• /
• 1998

압연철판의 생산라인에 있는 카메라에 입력되는 영상정보를 Image Frame Grabber를 이용하지 않고 Video Overlay Board를 사용하여 라인에 입력되는 압연철판을 분석하여 외곽선을 가로지른 선분의 길이가 기준에 준할 때 정확한 절단정보를 발생시킴으로 기존에 사용해온 작업자의 대략적인 지식을 이용한 절단에서 발생되는 압연 철판의 손실을 최소화시키며 불량률을 줄인다. 그리고 발생되는 정보를 DB화시킴으로 생산품의 정확한 재고량을 관리하는 시스템을 개발한다.

• KIPS Transactions on Computer and Communication Systems
• /
• v.8 no.12
• /
• pp.297-304
• /
• 2019

The technological advances such as communication, sensor, and artificial intelligence lead smart factory construction. Smart factory aims at efficient process control by utilizing data from the existing automation process and intelligence technology such as machine learning. As a result of constructing smart factory, productivity increases, but costs increase. Therefore, small companies try to make a step-by-step transition from existing process to smart factory. In this paper, we have proposed a remote control system that support data collection, monitoring, and control for manufacturing equipment to support the construction of CNC cutting machine based small-scale smart factory. We have proposed the structure and design of the proposed system and efficient sensing data transmission scheme. To check the feasibility, the system was implemented for CNC cutting machine and functionality verification was performed. For performance evaluation, the web page access time was measured. The results means that the implemented system is available level.

• Journal of the Korean Society for Railway
• /
• v.12 no.3
• /
• pp.342-347
• /
• 2009

Failure Mode Effects and Criticality Analysis (FMECA) is one of most widely used methods in modern engineering system to investigate potential failure modes and its severity upon the system. While performing FMECA, the experts evaluates criticality and severity of each failure mode and visualize the risk level matrix putting those indices to column and row variable respectably. Which results uncertainty in the result. In order to handle the uncertainty and conclude risk level matrix, this paper proposes a new FMECA procedure using minimal cut set (MCS) and fuzzy theory. Severity is calculated by proposed structural importance while criticality is determined by typical equipment failure rate data from IEEE Std 493. Finally, the risk level is compounded of these indices.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.06a
• /
• pp.335-336
• /
• 2008