• Title/Summary/Keyword: 절단제거

Search Result 229, Processing Time 0.026 seconds

알루미늄 링롤재의 급냉시 잔류응력 유한요소해석

  • 박성한;구송회;이방업;조원만;은일상
    • Proceedings of the Korean Society of Propulsion Engineers Conference
    • /
    • 1997.11a
    • /
    • pp.20-20
    • /
    • 1997
  • 고강도 알루미늄 대형 링롤재를 급냉할 때 발생하는 잔류응력을 2차원 및 3차원 유한 요소 해석하였고, 3단계 절단법에 의해 측정된 변형율과 ABAQUS의 요소제거 기능을 이용한 해석 값을 직접 비교하였다. 급냉후 잔류응력 해석결과는 2단과시효 후 측정값과 비슷한 경향을 보였으나 그 절대값의 차이가 크게 나타났다 이는 시편 링의 높이가 작아 실험 값이 부정확하였기 때문이며 링의 높이를 증가시켜 높이방향으로 균일한 응력분포를 갖도록 하면 그 차이가 감소될 것으로 판단된다. 잔류응력을 측정하는 3단계 절단 과정을 모사한 3차원 해석결과와 측정된 변형율을 직접 비교함으로써 실험과 해석의 정확성을 향상시킬 수 있도록 하였다. 이로부터 잔류응력이 존재하는 일반적인 알루미늄 구조물의 기계가공에 의한 변형을 정확히 예측할 수 있는 기반을 마련하였으며 구조해석 시 잔류응력의 영향을 고려할 수 있게 되었다.

  • PDF

Finite Element Analysis of Residual Stress after Quenching and Element Removal of A1 Ring Rolls (알루미늄 링롤재의 급냉 및 요소제거 후 잔류응력의 유한요소해석)

  • 박성한;구송회;이방업;조원만;은일상
    • Journal of the Korean Society of Propulsion Engineers
    • /
    • v.2 no.1
    • /
    • pp.31-40
    • /
    • 1998
  • To predict residual stresses of aluminum ring rolls after quenching and element removal, 2-D and 3-D thermal elasto-plastic analyses were performed. Strains measured by three step sectioning method were directly compared to those analysed using ABAQUS's element removal. Numerical residual stresses after quenching had similar tendency to measured ones after 2 step aging, but the difference between numerical and measured ones was large. The difference is the reason why there are nonuniform residual stress distributions to ring height direction due to small height of ring, It is judged that the increase of ring height will improve the accuracy of measured ones and decrease the difference. By direct comparison between 3-D numerical strains to simulate three step sectioning method and measured ones, the accuracy of measurement and analysis can be improved. It is concluded that there can be predicted the deformation behavior on machining complex shaped large structures with residual stresses.

  • PDF

A Study on the Development of Low Reynolds Number k-$\varepsilon$ Turbulence Model (저레이놀즈수 k-$\varepsilon$난류모형 개선에 관한 연구)

  • 김명호;신종근;최영돈
    • Transactions of the Korean Society of Mechanical Engineers
    • /
    • v.16 no.10
    • /
    • pp.1940-1954
    • /
    • 1992
  • Fine grid computations were attempted to analyze the turbulent flows in the near wall low Reynolds number region and the numerical analyses were incorporated by a finite-volume discretization with full find grid system and low Reynolds number k-.epsilon. model was employed in this region. For the improvement of low Reynolds number k-.epsilon. model, modification coefficient of eddy viscosity $f_{\mu}$ was derived as a function of turbulent Reynolds number $R_{+}$ and nondimensional length $y^{+}$ from the concept of two length scales of dissipation rate of turbulent kinetic energy. The modification coefficient $f_{\epsilon}$ in .epsilon. transport equation was also derived theoretically. In the turbulent kinetic energy equation, pressure diffusion term was added in order to consider low Reynolds number region effect. The main characteristics of this low Reynolds number k-.epsilon. model were founded as : (1) In high Reynolds number region, the present model has limiting behavior which approaches to the high Reynolds number model. (2) Present low Reynolds number k-.epsilon. model dose not need additional empirical constants for the transport equations of turbulent kinetic energy and dissipation of turbulent kinetic energy in order to consider wall effect. Present low Reynolds number turbulence model was tested in the pipe flow and obtained improved results in velocity profiles and Reynolds stress distributions compared with those from other k-.epsilon. models.s.s.

Auto-Segmentation Algorithm For Liver-Vessel From Abdominal MDCT Image (복부 MDCT 영상으로부터 간혈관 자동 추출 알고리즘)

  • Park, Seong-Me;Lee, You-Jin;Park, Jong-Won
    • Journal of Korea Multimedia Society
    • /
    • v.13 no.3
    • /
    • pp.430-437
    • /
    • 2010
  • It is essential for living donor liver transplantation that surgeon must understand the hepatic vessel structure to improve the success rate of operation. In this paper, we extract the liver boundary without other surrounding structures such as heart, stomach, and spleen using the contrast enhanced MDCT liver image sequence. After that, we extract the major hepatic veins (left, middle, right hepatic vein) with morphological filter after review the basic structure of hepatic vessel which reside in segmented liver image region. The purpose of this study is provide the overall status of transplantation operation with size estimation of resection part which is dissected along with the middle hepatic vein. The method of liver extraction is as follows: firstly, we get rid of background and muscle layer with gray level distribution ratio from sampling process. secondly, the coincident images match with unit mesh image are unified with resulted image using the corse coordinate of liver and body. thirdly, we extract the final liver image after expanding and region filling. Using the segmented liver images, we extract the hepatic vessels with morphological filter and reversed the major hepatic vessels only with a results of ascending order of vessel size. The 3D reconstructed views of hepatic vessel are generated after applying the interpolation to provide the smooth view. These 3D view are used to estimate the dissection line after identify the middle hepatic vein. Finally, the volume of resection region is calculated and we can identify the possibility of successful transplantation operation.

SEM Study on the Anaerobic Bacterial Adhesion to the Dentin of Root Canal (혐기성 미생물의 근관내 상아질 부착에 대한 주사전자현미경적 연구)

  • Sung-Eun Yang;Kwang-Shik Bae
    • Restorative Dentistry and Endodontics
    • /
    • v.26 no.4
    • /
    • pp.350-359
    • /
    • 2001
  • 목적 - 근관형성시 근관내 상아질벽에는 항상 도말층(smear layer)이 형성되는데, 이는 상아질, 치수조직 잔사, 조상아세포 돌기, 때로는 미생물 등으로 구성되며, 주사전자현미경상으로는 비규칙적이며, 무정형의 구상(granular)구조물로 관찰된다. 본 연구에서는 도말층의 유무에 따른 혐기성 미생물, Prevotella nigrescens의 근관내 상아질 부착정도를 주사전자현미경으로 평가하고자 한다. 지금까지 사용되었던 실험방법에 비하여 보다 임상적 환경에 가까운 실험방법을 고안, 신빙성 있는 연구결과를 기대할 수 있도록 하였다. 방법 - 치주질환이나 외상 등의 원인으로 발거된 상, 하악 전치 18개를 사용하였다. 각 치아의 치관부를 백악법랑경계부위에서 절단하고, 1군(5개치아)은 10ml의 생리식 염수를, 2군(5개치아)과 3군(5개치아)은 10ml의 3.5% NaOCl을 근관관주용액으로 사용하여 근관형성을 하였다. 근관형성 완료후 1군과 2군은 10ml의 생리식염수로, 3군은 10ml의 0.5M EDTA용액으로 final flush를 시행하여, 3군의 도말층을 제거하였다. 치근수직절단과 ethylene oxide(EO) gas 소독후 1, 2, 3군의 시편(각군10개시편)을 Prevotella nigrescens가 부유된 Brain Heart Infusion with Yeast estract, Hemin and Menadione(BHIYHM) broth내에 37$^{\circ}C$에서 3시간 동안 incubation했다. 4, 5, 6군은 실험과정을 검증하기 위한 대조군으로써, 4군(1개치아)과 5군(1개치아)은 1군, 2군과 같이 각각 생리식염수와 NaOCl만을 이용한 근관형성으로 도말층을 잔존시키고, 6군(1개치아)은 3군과 같이 NaOCl과 EDTA를 적용하여 도말층을 제거한 후, 치근 수직절단과 EO gas 소독을 시행했다. 모든 시편(1, 2, 3, 4, 5, 6군)을 통상의 방법에 따라 처리한 후 주사전자현미경을 통하여 관찰, 근관내면에 부착되어 있는 Prevotella nigrescens의 개수, 모양, 상아세관 및 도말층과의 관계 등을 관찰, 비교, 분석하였다. 결과는 t-test와 one-way ANOVA를 통하여 통계처리 하였다. 결론 - 1. 근관형성 후 근관내 상아질 표면 전체는 도말층으로 덮여 있는 양상을 보였다. 2. 3.5% NaOCl과 0.5M EDTA를 적용하여 근관내 도말층을 효과적으로 제거할 수 있었으며, 상아세관 개구부가 확연히 노출되어 있는 소견을 관찰할 수 있었다. 3. 도말층이 덮인군에서 미생물의 부착이 유의성 있게 높았다(P<0.05). 4. 근관 형성중 형성되어 근관 상아질을 덮고 있는 도말층이 미생물의 부착을 증가시켜, 근관 재감염의 기회를 증가시킴을 알 수 있었다.

  • PDF

Analysis and Measurement of Residual Stress of Al 7175 Ring Rolls after Quenching and stress Relieving (고강도 알루미늄 7175 합금 링롤재의 급냉 및 응력제거처리후 잔류응력 유한요소해석 및 측정)

  • 박성한;구송회;이방업;은일상
    • Journal of the Korean Society of Propulsion Engineers
    • /
    • v.1 no.1
    • /
    • pp.104-110
    • /
    • 1997
  • To predict the effect of ring expansion and ring compression on residual stress relief of Al 7175 ring rot]s, 2-D axisymmetric thermal analysis and elastoplastic analysis were performed. The residual stress distributions along the thickness of T73, T7351 and T7352 treated rings were measured using three step sectioning method. The measured results were compared to numerical ones for quenched and stress relieved rings. After quenching, calculated hoop and axial residual stresses were similar to measured ones for T73 treated rings. The residual stresses of T7351 and T7352 treated rings were decreased remarkably compared to T73 treated rings. The effect of axial residual stress relief was superior to that of hoop one, and also ring compression to ring expansion. It was concluded that ring compression is advantageous over ring expansion in view of stress relief effect and practicality, and vice versa in view of dimensional control and press power.

  • PDF

Mild Heat Treatments for Quality Improvement of Fresh-cut Potatoes (열처리가 신선편이 감자 가공품의 품질에 미치는 영향)

  • Lim Jeong-Ho;Choi Jeong-Hee;Hong Seok-In;Jeong Moon-Cheol;Kim Dongman
    • Food Science and Preservation
    • /
    • v.12 no.6
    • /
    • pp.552-557
    • /
    • 2005
  • Effect of pre- and post-mild heat treatment on quality of fresh-cut potatoes was investigated with the focus on surface color, firmness, phenolics, vitamin C and sensory characteristics. As the pre-heat treatment before cutting of potatoes, dried hot air (DH) and hot water (WH) treatment were conducted at $45^{\circ}C$ for 60 min, respectively. As a post-heat (CH) treatments, potato cubes were dipped into water of $55^{\circ}C$ for 45 seconds after cutting. The potato cubes were packed in 15 cm x 20 cm LDPE pouches $30^{\mu}m$ thick and then stored at $5{\pm}1^{\circ}C$. The respiration rate of fresh-cut potatoes was decreased by mild heat treatment Especially, the rate of cubes treated with DH was decreased by $20\%$ compared to that of the non-heat treated. L value of cubes treated with DH showed higher value than that of others. Firmness and free phenolics had no significant difference between the treatments. The fresh-cut potatoes prepared with non-heat treatment showed higher vitamin C content than that of the heat treated. In sensory visual color, CH treated cubes marked the best quality. Conclusively, mild heat treatment, especially CH treatment, showed positive effect on browning inhibition and quality enhancement of fresh-cut potatoes.

Role of Phospholipase $A_2$ on lipid peroxidation (과산화지질 형성에 있어서 Phospholipase $A_2$의 역할)

  • 황화신;정규찬;장현옥
    • Proceedings of the Korean Society of Applied Pharmacology
    • /
    • 1994.04a
    • /
    • pp.341-341
    • /
    • 1994
  • 생체막의 주요 구성성분인 인지질의 2번 위치에 결합한 불포화지방산은 각종 전이금속이나 각종 활성산소들의 공격을 쉽게 받아 지질과산화반응이 일어나서 생체에 유독한 화합물을 생성하게 된다. 생체는 이러한 기구의 해독을 위하여 크게 2가지 방어기전을 갖고 있다. 즉 Vitamin- C, $\alpha$-tocopherol, flavonoid, SOD, catalase 등과 같이 생성된 활성산소를 제거시키는 기구와. 활성산소에 의해 생성된 과산화물을 제거시키는 기구로 glutathione peroxidase (GPX)가 알려졌으며 GPX에 의해 독성이 낮은 수산화물까지 환원시키는 기구가 보고되었다. 그러나 인지질의 과산화물 그대로는 GPX의 기질이 쥘수 없으므로, 산화된 지방산을 절단하는 효소에 대한 기구의 해석이 요구되고 있다. 최근 여러질병에 관련되어 있는 인지질 2번위치의 지방산을 분해하는 phospholipase $A_2$ (PLA$_2$)가 과산화지질의 분해에 관여한다는 주장이 제기되었다. 따라서 본 연구에서는 rat liver microsome에 $CCl_4$투여로 일어나는 과산화반응에 있어서 PLA$_2$의 역할을 규명하기 위하여 본 실험을 행하였다.

  • PDF

NC Tool Path generation for a Polyhedral Model with a Filleted Endmill (필렛엔드밀을 이용한 다면체 곡면의 NC 가공 경로 생성)

  • 윤종윤;김동수;전차수
    • Proceedings of the Korean Operations and Management Science Society Conference
    • /
    • 2000.04a
    • /
    • pp.393-396
    • /
    • 2000
  • 본 연구에서는 필렛엔드밀을 이용하여 복합곡면을 가공하기 위한 새로운 접근방법을 제안한다. 이 방법은 "곡선기반 접근방법"으로 기존의 "점기반 접근방법"에 비하여 몇 가지 특징들을 가지고 있다. 본 연구에서는 다면체로 표현된 곡면을 대상으로 하고 있는데, 볼록한 모서리와 꼭지점에서는 정확히 옵셋시키고 오목한 부위에서는 옵셋 곡면이 겹치는 것을 허용한다. 옵셋된 곡면을 절단 평면으로 자르고, 같은 평면상에 있는 교선 중에서 겹치는 부분의 윗 부분을 택하면 공구 간섭이 제거된 공구 경로를 얻게된다. 즉 계산이 복잡한 오목지역에서의 옵셋 시 발생되는 간섭을 2차원 평면상에서 제거함으로써 계산 과정을 단순화시키고 안정적으로 만든다. 본 연구에서 제안한 방법은 PC에서 VC++로 구현되었으며 몇 가지 적용 예를 보여 주고 있다.

  • PDF

공유결합으로 고정화된 urokinase 칼럼의 스케일업과 solid-phase refolding에 의한 반복 사용

  • Seo, Chang-U;An, Sang-Jeom;Lee, Eun-Gyu
    • 한국생물공학회:학술대회논문집
    • /
    • 2001.11a
    • /
    • pp.85-88
    • /
    • 2001
  • We scaled up a covalent immobilization system of urokinase to the activated Sepharose and used it repeatedly to cleave a fusion protein consisting of human growth hormone and GST fragment. After scale up from 6 ml to 250 ml, the column system still demonstrated basically the same performance in terms of urokinase immobilization and fusion protein cleavage. When the column was washed with 6M guanidine HCl after the cleavage reaction. the immobilized urokinase showed no activity probably because it was fully unfolded. However. as the denaturant was gradually removed from the column the immobilized urokinase fully regained its bioactivity. which indicated it was properly refolded into its native conformation as covalently attached to the solid matrix. After 20 cycles of this 'solid-phase unfolding/refolding', the immobilized urokinase maintained approx. 80% of the initial bioactivity. This method provides an efficient protocol to apply the solid-phase refolding technique to improve the longevity of immobilized enzyme columns.

  • PDF