• Proceedings of the Korea Information Processing Society Conference
• /
• 2013.11a
• /
• pp.1050-1051
• /
• 2013

조선업종은 숙련공의 감소와 노동력 부족을 해결하기 위해 자동화와 기계화가 필요하다. 특히 조선용 핸드레일 제조공정은 표준화된 타 분야와 달리 자동화가 낙후되어 있다. 본 연구에서는 조선용 핸드레일 제작에 사용할 수 있는 평철 가공자동화시스템을 설계하였다. 시스템의 기구부는 절단공정의 효율성, 생산성, 안정성 등을 고려하여 설계하였고, CATIA 와 ANSYS를 사용하여 구조물의 안정성을 확인하였다. 시스템 제어부는 개방성과 확장성을 제공하는 PCNC 콘트롤러를 사용하였고, 터치스크린 방식의 화면 조작을 통해 시스템의 제어 및 모니터링을 할 수 있도록 구축하였다.

• Restorative Dentistry and Endodontics
• /
• v.22 no.2
• /
• pp.546-559
• /
• 1997

The purposes of this study were to evaluate the efficiency of cavity preparation and to determine the incidence of tooth crack when root-end retrograde cavity preparation was done with ultrasonics. 91 distobuccal root-ends of extracted human maxillary first molars were cut by 3 mm perpendicularly to the long axis of tooth using a slow speed diamond saw, retrocavities were prepared using a slow-speed no. 2 round bur as controls, and stainless steel ultrasonic tips of power settings of 1 through 10 as experimentals. Time consumed and the number of strokes used for the cavity preparation were measured and evaluated, and the incidence of tooth cracks was observed under a stereomicroscope. The results were as follows : For the retrograde cavity preparation, time and number of strokes used were decreased as the ultrasonic power setting increased (p<0.001). High power setting of ultrasonics induced significantly more tooth cracks than did the slow-speed bur or low- and medium power setting of ultrasonics (p<0.05). Teeth with previous crack induced significantly more tooth cracks than those without previous one when high power setting of ultrasonics were used for the retrograde cavity preparation (p<0.001). Teeth with initial apical canal size of no. 10 induced significantly more crack than did those with size of no. 15 when low power setting of ultrasonics were used for the retrograde cavity preparation (p<0.05).

• Journal of Digital Convergence
• /
• v.12 no.1
• /
• pp.593-598
• /
• 2014

To solve the labor shortage of skilled workers, the ship building industry needs the automation and mechanization. Especially, compared with other process, handrail manufacturing process of ship building falls behind the automation. In this paper, we designed and implemented a flat-iron automation system using computer convergence technology that can be used in the production of handrails in shipbuilding. The system's machine part was designed by considering the efficiency, productivity, and stability of the cutting process, and checked the stability of the structure using CATIA and ANSYS. The system's control part was used the PCNC controller to provide openness and scalability. And the part was made for system control and monitoring the system through screen manipulation with touch-screen form. A flat-iron automatic system was developed by converging the mechanics, electronics and computer technology and it will contribute to improve the productivity of the industrial system.

• Journal of Sensor Science and Technology
• /
• v.8 no.1
• /
• pp.1-9
• /
• 1999

A study has been made on the fabrication of a dual mode(a longitudinal and shear mode) ultrasonic sensor using a single PZT piezoelectric ceramic element. We investigated the mechanism of the dual mode sensor that generated both of the longitudinal and the shear waves simultaneously with the single PZT element. Through the analysis of analytic wave propagation equations, all the possible crystal cuts have been examined to determine appropriate Euler transformation angles for efficient excitations of the dual modes. We studied the performance of a PZT element as a function of its rotation angle so that its efficiency is optimized to excite the two waves of equal strength. Experimental examination of the waveform on a delay line(STS303) setup confirms that the ultrasonic sensor can transmit and detect both longitudinal and shear waves simultaneously.

• Restorative Dentistry and Endodontics
• /
• v.26 no.1
• /
• pp.9-15
• /
• 2001

통상적인 근관형성 과정에서 근관형태의 직선화 경향을 발견할 수 있으며, 그 결과 만곡이 심한 근관에서 이상적인 근관형태를 얻기가 어렵다. 이를 극복하기 위한 많은 기구들과 근관 성형법들이 개선되고 소개되었다. 본 연구에서는 최근에 개발된 직사각형의 단면을 가지는 stainless steel file인 RT file과 Flex-R file, K-file을 이용하여 만곡근관 형성 후 최종 근관형태를 비교하여 각 file을 평가하고자 한다. 본 실험은 Bramante등의 방법을 변형하여 술 전의 근관형태와 술 후의 근관형태를 비교하였다. Schneider의 방법을 변형하여 3차원적 만곡을 계산하여 12도에서 36도 이내에 만곡도를 가진 근관을 선택하였다. 49개의 발거된 상악대구치 협측근관이나 하악대구치 근심근관을 3개의 군으로 나누고 레진과 플라스틱으로 제작된 mold에 투명한 교정용 레진으로 매몰하였다. 근첨에서 2.5, 5, 8mm지점에서 절단하여 각 mold에서 재조립한 후 다음과 같이 근관형성을 시행하였다. 제 1군은 SS K-file을 이용하여 step-back 방법 ; 제 2군은 Flex-R file을 이용하여 balanced force 방법 ; 제 3군은 RT file을 이용하여 step-back 방법으로 근관 형성하였다. 술 전과 술 후에 각 시편들을 체현미경으로 사진촬영하여 근관 중심 위치 이동률, 근관형성으로 삭제된 상아질양, 근관형성 후 모양을 Sigma scan/ image software program으로 계산하고 One way ANOVA로 통계적 유의성을 검증하여 다음과 같은 결론을 얻었다. 1. RT file이 치근단에서 K-file보다 유의성 있게 근관의 중심을 유지하는 것으로 보였다. 치아 중앙부에서는 RT file과 Flex-R file이 K-file에 대해 유의성 있게 우수한 것으로 나타났다. 2. 근관형성 후 삭제된 상아질양에서는 치근단에서 RT file이 적게 나왔으나 유의성은 없었다. 3. 근관형성 후 절단면 모양은 원형, 타원형, 불규칙한 형태들이 다양하게 나타났고 각 군간에 유의성 있는 차이는 없었다.

• Journal of the Korean Vacuum Society
• /
• v.13 no.1
• /
• pp.1-8
• /
• 2004

The SOI wafer fabrication technique has been developed by using ion-cut process, based on proton implantation and wafer bonding techniques. It has been shown by TRIM simulation that 65 keV proton implantation is required for the standard SOI wafer (200 nm SOI, 400 nm BOX) fabrication. In order to investigate the optimum proton dose and primary annealing condition for wafer splitting, the surface morphologic change has been observed such as blistering and flaking. As a result, effective dose is found to be in the 6∼$9\times10^{16}$ $H^{+}/\textrm{cm}^2$ range, and the annealing at $550^{\circ}C$ for 30 minutes is expected to be optimum for wafer splitting. The depth distribution of implanted hydrogen has been experimentally confirmed by ERD and SIMS measurements. The microstructure evolution in the damaged layer was also studied by X-TEM analysis.

• Journal of Chest Surgery
• /
• v.32 no.2
• /
• pp.171-174
• /
• 1999

Background: Hyperhidrosis of the palms, axillae and face has a strong negative impact on social and professional life. The present existing non-operative therapeutic options seldom give sufficient relief and have a transient effect. A definitive cure can be obtained by upper thoracic sympathectomy. However, this is offset by the occurrence of a high rate of side effects, such as embarrassing compensatory sweating. Material and Method: From Sep. 1997 to Feb. 1998, 89 cases of the needle(2 mm) thoracoscopic thoracic sympathicotomy were performed. The second thoracic ganglion was resected by cutting with a endoscissors. Result: A bilateral procedure takes less than 25 min and requires just one night in hospital. There have been no mortality or life-threatening complications. One patient(<2%) required intercostal drainage because of pneumothorax. Primary failure occurred in one cases(<2%) and recurrent hyperhidrosis occurred in no cases. The patients with failure was successfully re-sympathicotomy. At the end of postoperative follow-up(median 3 months), 96.6% of the patients were satisfied. Compensatory sweating occurred in 57 cases(64.0%) with fourteen of those cases classified as either embarrassing in 10 cases(11.2%) or disabling in 4 cases(4.5%). Conclusion: Endoscopic transthoracic sympathicotomy is an efficient, safe and minimally invasive surgical method for the treatment of palmar and craniofacial hyperhidrosis.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.5 no.3
• /
• pp.209-214
• /
• 1995

Abstract 0.2 wt % $Fe_2O_3$ doped $SrTiO_3$ single crystals were grown by floating zone method in air and Nz atmosphere, respectively. The growth rate was fixed at 5 mm/hr and rotation speed was maintained at 30 rpm. As - grown crystals were cut perpendicular to its growth direction and then, annealed at 900, 1000 and $1100^{\circ}C$ for 2 hours in Nz atmosphere. Resistivities of each samples were measured and then converted into conductivities. By using these conductivity values, the activation energies were calculated and by means of the calculated activation energies, mechanism which contribute to increasing the electrical conductivity were investigated.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.6
• /
• pp.2612-2617
• /
• 2013

This study aims to develop hair cutter with zirconia($ZrO_2$) material whose machinability, corrosion resistance, wear resistance and bio-compatibility are excellent by comparing iron hair cutter. Ultra-thin zirconia cutter with the thickness of 0.253mm is manufactured through the optimization of design, molding, sintering, grinding and grinding process. With observation result of cutter specimen by use of scanning electron microscope(SEM), formability and process of cutting face are shown to be good. It is also evaluated with sufficient merchantability by cutting test results. The cutter process technology of thin zirconia can be utilized at the development of high value-added beauty appliances like razor, beauty-razor and eye brows-razor for woman by use of study result.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.2
• /
• pp.852-857
• /
• 2011

The shipbuilding industry needs automation and mechanization to solve reduction of skilled workers and labor shortage. Ship manufacturing process is the lack of automation than standardized manufacturing field. In this paper, we design and development an process automation system for hand rail production. Mechanical parts of the cutting process was designed with efficiency, productivity and reliability, CATIA and ANSYS, the stability of the mechanical structure was confirmed. System control using a PCNC controller to provide an open and scalable, and operate using touch-screen display control and monitoring of the system was performed. The automatic system successfully passed the driving test and processing test, and it showed an excellent performance.