• Proceedings of the KAIS Fall Conference
• /
• 2012.05b
• /
• pp.631-633
• /
• 2012

본 논문은 구조용 후판 강재로 절곡되었을 때, 절곡부재의 구조연성 변화에 대한 해석 방안과 이에 따른 해석적 평가 사례를 제시하고 있다. 절곡 방법에 의한 제작과정에서 재료는 변형경화 현상이 발생한다. 이로 인해 구조연성 저하가 불가피하기 때문에 절곡부재의 휨연성 검토가 필요하다. 해석 방안은 유한요소해석 프로그램인 ABAQUS를 이용하였다. Lanczos 알고리즘을 적용한 고유치해석과 재료 비탄성-기하비선형을 고려한 비선형 해석을 하였다. 비선형해석 절곡에 의한 재료특성을 고려하였다. 극한 하중과 파괴모드를 평가하기 위해 Newton-Raphson method, modified Riks method를 적용한 단계별 하중재하 해석을 실시하였다. 본 연구를 통해 휨연성을 평가하는데 활용 될 것으로 판단된다.

• Proceedings of the Korean Fiber Society Conference
• /
• 2007.11a
• /
• pp.271-272
• /
• 2007

See Full Text

• Journal of the Korean Society for Precision Engineering
• /
• v.6 no.3
• /
• pp.100-108
• /
• 1989

The frequency equation and numerical process of natural frequencies for several boundary conditions of L-type folded plate given to the different thickness and lenth are derived by using Rayleigh-Ritz method in this study. Those natural frequencies are attaind by choosing the proper eigenfunction for boundary conditions of x-direction and y-direfction beams, by considering the convergence of numerical results.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.13 no.3 s.55
• /
• pp.145-154
• /
• 2009

Steel-Concrete Composite Deck with I-beam welded is lighter and easier to construct than conventional in situ reinforced concrete slabs due to the I-beam embedded in the corrugated slab. For the calculation of effective flexural rigidity of conventional reinforced concrete structures, methods suggested in Design Standard for Roads and Bridges and ACI have been used. In this paper, the calculation methods were applied to steel-concrete composite deck with I-beam welded and then results of the steel-concrete composite deck were compared with those of reinforced concrete slabs. In addition, applicability of the methods to steel-concrete composite deck with I-beam welded was estimated. In order to compare the effective flexural rigidity, flexural experiments were conducted. Fifteen slabs were built and the variables considered in the experiments were studs, length of the slab, shape of the section and connecting methods.

• Journal of the Microelectronics and Packaging Society
• /
• v.18 no.1
• /
• pp.55-59
• /
• 2011

Folding endurance, bending fatigue and monotonic tensile tests of 4 kinds of Cu foil on flexible substrate was performed to investigate the relationship between folding or bending endurances and tensile characteristics. The repeated 5.3 or 2.0% strain was applied to Cu foil in folding endurance test or bending fatigue test while monitoring the electrical resistance. Elastic modulus, yield strength, ultimate tensile strength, ductility, and toughness were obtained by monotonic tensile test on the same samples. The Cu foil with higher toughness and ductility showed higher reliabilities in folding or bending fatigue. However, elastic modulus and yield strength did not show any relationship with folding and bending reliability. This is because the failures of Cu foil by folding or bending fatigue were closely related to the fracture energy of metal.

• Journal of Korean Society of Steel Construction
• /
• v.28 no.5
• /
• pp.355-363
• /
• 2016

This study numerically investigates buckling behavior of press braked steel plates with a free edge that consists of the upper flange of U-shaped box girder. Since the press-braked plates include a rounded edge, the effective width to thickness ratio of the press-braked upper flange is obscure to determine the nominal compressive strength. This study performed 3D finite element analyses to evaluate an equivalent effective width of cold-formed plate with a free edge. Through the parametric numerical analyses, the elastic buckling stresses of the rounded corner plates were compared with those of general flat plates and then, the equivalent effective width has been estimated. A comparative study with Euler buckling formula speculated in the domestic design specifications has been conducted.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.9 no.1
• /
• pp.233-241
• /
• 2005

The paper is presented experimental study results on bond stress between profiled steel and concrete in Profiled SPC(Profiled Steel Plate Concrete) rectangular steel tubes through an experimental program in which 13 pull-out specimens were tested. Advantages and class of composite members and current problems of construction work are noted, past research of PSSC is described. An experimental study is described and evaluated. The bond capacity is interrelated with slip at the steel concrete interface. The factors influencing the mechanism of bond stress transfer were the cross section shape, length/diameter, diameter/thickness and environmental parameters (temperature, moisture). The results of experimental program indicated that the force transfer could be characterized into two regions The first region was governed by bond with no relative slip between the profiled steel and concrete. The second region occurs after the chemical debonding. Bond stress transfer in this region was governed by frictional resistance between profiled steel and concrete and cross section shapes. The important factors influencing the magnitude of frictional resistance are the profiled steel shapes, length/diameter and environmental parameters. (temperature, moisture)

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.5
• /
• pp.3051-3059
• /
• 2015

In this study, the effect of corrugation angle on thermal performance of corrugated plate is numerically investigated with an aim to develop humidifying element. Numerical analysis was conducted for a range of corrugation angle (from $0^{\circ}/0^{\circ}$ to $60^{\circ}/60^{\circ}$ for equal angle and from $15^{\circ}/0^{\circ}$ to $15^{\circ}/60^{\circ}$ for unequal angle). Results revealed that both j and f factor increased as corrugation angle increased. Especially, f factor increased significantly at high corrugation angles. j and f factors of unequal angle plates and those of equal angle (obtained by averaging unequal angles) plates were approximately the same. The largest $j/f^{1/3}$, which implies the largest heat transfer rate per consumed power, was obtained at $15^{\circ}/15^{\circ}$. Existing correlations under- or over-predicted the present numerical results.

• Proceedings of the KAIS Fall Conference
• /
• 2011.12b
• /
• pp.461-464
• /
• 2011

대형 다각형 단면 기둥부재의 제작은 용접이나 절곡 등의 다양한 혼합방식으로 이루어 질 수 있다. 이러한 제작방식의 차이에 따라 외력작용 이전의 초기상태에 상당한 차이가 발생한다. 그러나 절곡과 용접이 혼합된 다각형 단면 기둥의 초기 상태를 고려하는 방안에 대한 지침은 분명히 제시되고 있지 않다. 이에 본 연구에서는 다각형 단면 기둥 제작방식에 따른 초기상태가 국부좌굴강도에 미치는 영향을 6각형 단면 기둥모델을 대상으로 해석적으로 평가해 보고자 한다.

• Journal of Bio-Environment Control
• /
• v.30 no.4
• /
• pp.251-256
• /
• 2021

This study aimed to compare the growth and production of paprika (Capsicum annuum) planted directly on a coir substrate slab according to the bending methods. The existing root direction was bent to 0° (I-type), 90° (L-type), and 180° (U-type), respectively. The weekly average growth such as stem length, diameter, and leaf area tended to be the highest in the I-type bending, but there was no statistical difference. Root weight at 46 weeks after planting was also about 1.3 to 1.7 times heavier in the I-type than the L- and U-type bending. As the yield produced by 330 plants by bending methods, the initial yield was the highest in the U-bending, but then the highest in the I-bending. Accordingly, the total yield was the highest in I-bending. Consequently, when planting on coir substrates directly in paprika cultivation, the I-type bending should be considered most suitable for securing root and plant vigor in the early stages of planting and for enhancing fruiting stability.