• Journal of Hydrogen and New Energy
• /
• v.17 no.3
• /
• pp.347-352
• /
• 2006

분자전해질연료전지 내의 다공성 기체확산층은 반응가스의 확산과 전자이동통로의 역할을 수행할 뿐만 아니라 전기화학반응에 의해 공기극에서 생성된 수분(기상 혹은 액상)을 반응면으로부터 분리판 채널 방향으로 이동시켜 배출시키는 중요한 역할을 한다. 따라서 물관리를 통한 성능향상을 위해서는 기체 확산층의 구조 및 재료특성에 대한 심도 릴은 연구가 필요하다. 실제 단위전지 체결시 기체확산층은 분리판의 리브(rib)에 의해 눌리게 되며, 그 부분의 기공 크기 분포의 변화를 야기한다. 또한 리브 전단부분에서 탄소 섬유가 손상을 입으며, 탄소 섬유를 감싸고 있는 PTFE coating이 벗겨지게 되어 표면화학적 특성이 달라진다. 본 연구에서는 단위전지 체결 시 분리판에 의해 눌리는 기체확산층의 기공 크기 분포 변화를 측정하였으며, 기공의 소수성에서 친수성으로의 변화를 알아보았다. Mercury 기공 측정기와 PMI 기공 측정기는 큰 기공 분포의 변화에, 질소의 흡/탈착을 이용한 BET 방식은 작은 크기의 기공 분포 변화 관찰에 사용되었다. 체결압에 의한 탄소섬유의 구조적 변화와 아울러 표면의 습윤 정도의 변화를 XPS와 물/알콜 Uptake를 이용해 알아보았다. 이 연구를 바탕으로 물관리를 통한 연료전지 성능 향상을 위한 최적 GDL 선정에 기반이 되는 자료를 도출하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.400-400
• /
• 2012

산화물 반도체는 넓은 에너지갭을 가지고 높은 이동성과 높은 투명성을 가지기 때문에 초고 속 박막 트랜지스터(Thin film transistor; TFT)에 많이 응용되고 있다. 그러나 ZnO 및 $In_2O_3$ 산화물 반도체를 박막트랜지스터에 사용할 경우 소자가 불안정하여 전기적 성질이 저하되고 문턱전압의 이동이 일어난다. TFT에 사용되는 산화물 반도체로는 GaInZnO, ZrInZnO, HfInZnO 및 GaSnZnO의 전기적 특성에 관한 연구가 많이 되었다. 그러나 titanium-indium-zinc-oxide (TIZO) TFT에 대한 연구는 비교적 적게 수행 되었다. 본 연구에서는 TFTs의 안정성을 향상하기 위하여 TFT의 채널로 사용되는 TiInZnO를 형성하는데 간단한 제조 공정과 낮은 비용의 용액 증착방법을 사용하였다. 졸-겔 전해액은 Titanium (IV) isopropoxide $[Ti(OCH(CH_3)_2)_4]$, 0.1 M Zinc acetate dihydrate $[Zn(CH_3COO)_2{\cdot}2H_2O]$ 그리고 indium nitrate hydrate $[In(NO_3)_3{\cdot}xH_2O]$을 2-methoxyethanol의 용액에 합성하였다. $70^{\circ}C$에서 한 시간 동안 혼합 하였다. Ti의 몰 비율은 10%, 20% 및 40% 로 각각 달리하여 제작하였다. $SiO_2$층 위에 2,500 rpm 속도로 25초 동안 스핀 코팅하여 TFT를 제작하였다. TIZO 박막에 대한 X-선 광전자 스펙트럼 관측 결과는 Ti 몰 비율이 증가함에 따라 Ti 2p1/2피크의 세기가 증가함을 보여주었다. TiZO 박막에 Ti 원자를 첨가하면 $O^{2-}$ 이온이 감소하기 때문에 전하의 농도가 변화하였다. 전하 농도의 변화는 TiZO 채널을 사용하여 제작한 TFT의 문턱전압을 양 방향으로 이동 하였으며 off-전류를 감소하였다. TiZO 채널을 사용하여 제작한 TFT의 드레인 전류-게이트 전압 특성은 on/off비율이 $0.21{\times}107$ 만큼 크며 이것은 TFT 소자로서 우수한 성능을 보여주고 있다.

• Journal of Veterinary Clinics
• /
• v.29 no.6
• /
• pp.435-440
• /
• 2012

This study was designed to evaluate the clinical efficacy and safety of Rhubarb extracts ($Rubenal^{(R)}$) in dogs with chronic renal failure (CRF). Client-owned 40 dogs with CRF graded International renal interest Society (IRIS) II-III were enrolled in this study. The dogs were equally allocated and blindly administered with $Rubenal^{(R)}$ or placebo. The following items were evaluated at day 0, 30, 90 and 180: body condition score (BCS), clinical score (appetite, polydipsia/polyuria, quality of life score), hemogram (WBC, RBC, PCV), serum biochemistry (ALT/AST, ALP, Creatinine/BUN, total protein, albumin), serum electrolyte (Na, K, Cl, Ca, P), systolic blood pressure, urinalysis (UPC, USG) and IRIS stage. In this study, we found that the $Rubenal^{(R)}$ preparation was well tolerated by dogs and induced no adverse effects. Statistically significant improvements were observed in clinical score (quality of life score by vet and clients), serum BUN and creatinine levels, serum phosphorus concentration, level of proteinuria, and the IRIS score of CRF in dogs after 6 month of treatment of $Rubenal^{(R)}$. Those findings suggested that the Rhubarb extracts can improve the clinical signs of CRF (i.e. azotemia, hypertension, proteinuria, hyperphosphoremia) and the quality of life (i.e. BCS, clinical score) and can retard the progression of CRF in dogs. Therefore the Rhubarb extracts can be a good supplementary drug for treating dogs with subclinical and clinical renal diseases. However, care should be taken for interpreting our result, because this study is not double-blinded controlled study but pilot study.

• Journal of the Korean Electrochemical Society
• /
• v.5 no.2
• /
• pp.52-56
• /
• 2002

Tin oxide was coated on graphite particle by sol-gel method and an electrode with this material having microcrystalline structure for lithium ion battery was obtained by heat treatment in the range $400-600^{\circ}C$. The content of tin oxide was controlled within the range of $2.25wt\%\~11.1wt\%$. The discharge capacity increased with the content of tin oxide and also initial irreversible capacity increased. The discharge capacity of tin oxide electrode showed more than 350 mAh/g at the initial cycle and 300 mAh/g after the 30th cycle in propylene carbonate(PC) based electrolyte whereas graphite electrode without surface modification showed 140 mAh/g. When the charge and discharge rate was changed from C/5 to C/2, The discharge capacity of tin oxide and graphite electrode showed $92\%\;and\;77\%$ of initial capacity, respectively. It has been considered that such an enhancement of electrode characteristics was caused because lithium $oxide(Li_2O)$ passive film formed from the reaction between tin oxide and lithium ion prevented the exfoliation of graphite electrode and also reduced tin enhanced the electrical conduction between graphite particles to improve the current distribution of electrode.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.16 no.1
• /
• pp.59-64
• /
• 2018

In case of high contents of rare earths in the LiCl-KCl salt, it is not easy to recover U and TRU metals as a usable resource form from LiCl-KCl eutectic salts generated from the pyroprocessing of spent nuclear fuel. In this study, a conversion of $UCl_3$ into an oxide form using $K_2CO_3$ and an electrodeposition of $NdCl_3$ into a metal form in $LiCl-KCl-UCl_3-NdCl_3$ system were conducted to resolve the problem. Before conducting the conversion, experimental conditions for the conversion were determined by performing a thermodynamic equilibrium calculation. In this study, almost all of $UCl_3$ disappeared in the LiCl-KCl salt when the injection of $K_2CO_3$ reached theoretical equivalent for the conversion, and then $NdCl_3$ was effectively electrodeposited as a metal form using liquid zinc cathode. After that, the LiCl-KCl salt became transparent, and uranium oxides were precipitated to the bottom of the LiCl-KCl salt. These results will be utilized in designing a process to separate U and rare earths in LiCl-KCl salt.

• Membrane Journal
• /
• v.13 no.3
• /
• pp.143-153
• /
• 2003

The effects of bipolar interface formed on the surface of cation-exchange membrane on water splitting phenomena were investigated. Results showed that the formation of immobilized bipolar interface resulted in significant water splitting during electrodialysis. In particular, the immobilized bipolar interface was easily created on the cation-exchange membrane surface in the electrodialytic systems where multivalent cations served as an electrolyte. Multivalent cations with low solubility product resulted in violent water splitting because they were easily precipitated on the membrane surface in hydroxide form. Therefore, the bipolar interface consisting of H- and OH-affinity groups were formed on the membrane-solution interface. Apparently, water splitting was largely activated with the help of strong electric fields generated between the metal hydroxide layer and fixed charge groups on the membrane surface. Likewise, the accumulation of large molecular counter ions on the membrane surface led to the formation of a fixed bipolar structure that could cause significant water splitting in the over-limiting current region. Therefore, the prevention of the immobilization of bipolar interface on the membrane surface is very essential in improving the process efficiency in a high-current operation.

• Applied Microscopy
• /
• v.38 no.1
• /
• pp.11-19
• /
• 2008

To examine the effect of the electrolyzed alkaline reduced water (ERW) on animal immunity, by employing Echinostoma hortense that is a parasite in the small intestine, the immune response of C57BL/6 was examined. To C57BL/6 mice, Echinostoma hortense metacercaria 15 per animal was in oculate dorsally, the worm was collected after 2 weeks, and the change of goblet cells and mast cells in the mucosa of small intestine was examined, and by using a protein chip, the change of cytokines in the serum was compared and observed. As a result, average 8.3 worms were collected from the C57BL/6 mice infected with E. hortense, and in the group fed with the ERW, average 10 worms were collected. In regard to the examination of the change of goblet cells, in the experimental group infected with E. hortense and fed with the ERW, average 4.3 worms per villus were detected, hence, it was found that the expression of goblet cells was low (p<0.001). Regarding the examination of the change of mast cells, similarly, in the group infected with E. hortense and fed with the ERW, average 11 worms per villus were detected, and it appears to be less than control group (p<0.001). Regarding the expression of cytokines in mouse serum, in comparison of the experiment group infected with E. hortense and control group, in the expression of the Th1 cytokines IL-6, IL-$1{\beta}$, IFN-${\gamma}$, TNF-${\alpha}$, and IL-2, and the Th2 cytokines IL-4, IL-5, IL-10, and IL-13, a significant difference was not detected. In our study, it was found that in the infection of E. hortense, the ERW mediates its effect on the number of goblet cells and mast cells in the intestinal mucosa, and simultaneously, the worm expulsion was delayed, and thus the conclusion that the ERW mediated its effect on the intestinal immunity of mice was obtained.

• Journal of the Korean Electrochemical Society
• /
• v.6 no.1
• /
• pp.41-47
• /
• 2003

For the development of low temperature anode-supported planar solid oxide fuel cell, the planar anode supports with the thickness of 0.8 to 1 mm and the area of 25, 100 and $150\;cm^2$ were fabricated by the tape casting method. The strength, porosity, gas permeability and electrical conductivity of the planar anode support were measured. The porosity of anode supports sintered at $1400^{\circ}C$ and then reduced in$H_2$ atmosphere was increased from $45.8\%\;to\;53.9\%$. The electrical conductivity of the anode support was $900 S/cm\;at\; 850^{\circ}C$ and its gas permeability was 6l/min at 1 atm in air atmosphere. The electrolyte layer and cathode layer were fabricated by slurry dip coating method and then had examined the thickness of $10{\mu}m$ and the gas permeability of 2.5 ml/min at 3 atm in air atmosphere. As preliminary experiment, cathode multi-layered structure consists of LSM-YSZ/LSM/LSCF. At single cell test using the electrolyte layer with thickness of 20 to $30{\mu}m$, we achieved $300\;mA/cm^2$ and 0.6V at $750^{\circ}C$

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.321-321
• /
• 2016

한경오염의 증가에 따라 광촉매 물질을 이용한 환경 정화의 필요성이 대두되고 있다 [1]. 광촉매와 전기화학셀은 빛을 이용하여 다른 에너지를 생산하는 능력을 가지고 있다. 이 전기화학셀의 성능향상을 위해서는 적절한 밴드갭을 이용한 광흡수의 증가, 전자재결합의 감소, 전기화학적 반응 표면의 증가가 필요하다. 산화 아연은 잘 알려진 n형 산화물 반도체로서 좋은 전기적 특성과 광촉매 성능으로 전기화학셀에 적합한 소재이다. 그러나 산화 아연은 액체 전해물질 상에서 안정성이 좋지 못하다 [2]. 이를 해결하기 위해 단층 그래핀 혹은 풀러렌(C60)을 이용하여 산화아연을 코팅하는 방법을 제안하였는데, 풀러렌을 사용 시 단층 그래핀에 비하여 전기화학셀의 전기화학적 반응은 높았으나 안정성은 더 떨어지는 모습을 보였다 [3]. 본 연구에서는 다층 그래핀을 이용하여 전기화학적 반응도 높고 안정성도 높은 산화아연-다층 그래핀 양자점의 합성 및 이를 이용한 전기화학셀 소자의 특성을 연구하였다. X선 회절법, 라만 분광법, 투과 전자 현미경, 광발광 분광기, 시간-분해성 광발광 분광기를 이용하여 산화아연-다층 그래핀 양자점의 특성을 분석하였고, 이를 이용하여 광양극을 제작하여 전기화학적 특성을 관측하였으며 로다민 B 염료를 이용한 분해 테스트를 통하여 광촉매 성능을 확인하였고 사이클 테스트를 통하여 안정성을 확인하였다.

• Journal of the Korean Ceramic Society
• /
• v.38 no.4
• /
• pp.325-330
• /
• 2001

고상반응법으로 이론 밀도의 약 97%의 소결 밀도를 갖는 N $d_{1-x}$S $r_{x}$G $a_{1-x}$M $g_{x}$ $O_{3{\delta}}$(x=0, 0.03, 0.07, 0.1) 고체전해질을 제조하였다. X선 회절 분석 결과, x=0.03일 때의 X선 회절도는 순수한 NdGa $O_3$와 같았으나, x=0.07, 0.1일 때에는 불순물이 나타났다. 교류 복소임피던스는 4$50^{\circ}C$~90$0^{\circ}C$의 온도 범위에서 공기 중에서 측정하였으며, 각 조성에 대하여 상호 비교 분석하기 위하여 복소비저항 스펙트럼으로 변환하여 해석하였다. 전기전도도는 N $d_{0.93}$S $r_{0.07}$G $a_{0.93}$M $g_{0.07}$ $O_{0.97}$(x=0.07) 시편이 90$0^{\circ}C$에서 6$\times$$10^{-3}$ S$cm^{-1}$ /로 가장 우수하였으며, 활성화 에너지는 저온 영역에서는 1 eV, 고온 영역에서는 0.74 eV이었다.다.