• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1123-1125
• /
• 2005

본 논문에서는 3차원 공간에 종이와 같은 박막형 유전체가 있을 때 임의의 점에서의 전계$\vec{E}$를 구하기 위해 유전체의 분극벡터$\vec{P}$를 미지수로 하는 경계적분법(Boundary integral method)을 사용한다. 경계적분법의 사용으로 FEM 3차원 해석에 있어서의 요소분할의 난이성 및 계수 행렬의 대형화로 인한 컴퓨터 수행능력의 한계를 극복할 수 있다. 여기서 분극벡터$\vec{P}$를 구하기 위해 전하에서의 전계${ves{E}}_s$에 의한 유전체내의 분극벡터$\vec{P}$를 수식으로 정리하여 $[\vec{K}][\vec{P}]=[\vec{E}]$ 형태의 $\vec{P}$를 미지수로 하는 system matrix를 구성한다. 위의 system matrix 통해 구해진 분극벡터 $\vec{P}$를 이용하여 유전체 밖의 한 점에서의 전계세기 ${\vec{E}}_m$를 구한 후 우리가 구하고자 하는 전계$\vec{E}$를 계산한다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.3
• /
• pp.73-84
• /
• 2002

Fast and accurate new capacitance determination methodology for non-uniform complicated multi-layer VLSI interconnects is presented. Since a capacitance determination of intricate multi-layer interconnects using 3-dimensional field-solver is not practical, quasi-3-dimensional methodology is presented. Interconnects with discontinuity (i.e., bend structure and different spacing between lines, etc.) are partitioned. Then, each partial capacitance of divided parts is extracted by using 2-dimensional extraction methodology. For a multi-layer interconnects with shielding layer, the system can be simplified by investigating a distribution of charge in it. Thereby, quasi-3-dimensional capacitance for multi-layer interconnects can be determined by combining solid-ground based 2-dimensional capacitance and shielding effect which is independently determined with layout dimensions. This methodology for complicated multi-layer interconnects is more accurate and cost-efficient than conventional 3-dimensional methodology It is shown that the quasi-3-dimensional capacitance methodology has excellent agreement with 3-dimensional field- solver-based results within 5% error.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.31 no.5
• /
• pp.422-426
• /
• 2005

Purpose : The purpose of this study was to investigate the vertical stability after BSSRO surgery in skeletal class III malocclusion patients with mild anterior open bite and to present a method to increase the stability. Materials and methods : 36 patients, 11 male and 25 female, who received BSSRO surgery with the diagnosis of skeletal class III with anterior open bite at the Department of Oral and Maxillofacial Surgery in Samsung Medical Center, from January 2002 to August 2003, were selected for this study. The patients were between 18 to 45 years of age. Preoperative and postoperative (immediate, 6 months, and 1 year after operation) lateral cephalograms were compared to evaluate the vertical stability by measuring the distance of nasion-menton, mandibular plane angle, and overbite. Results : The nasion-menton distance decreased by 1.65mm immediately after the operation in comparison to the preoperative value. This distance further decreased by 0.60 mm at 6 months and 1.06mm at 1 year after the operation. The mandibular plane angle increased after the operation and further increased at 6 months and 1 year. The amount of overbite increased by the operation was 2.34mm and an additional increase of 0.70mm at 6 months and 0.94mm at 1 year were shown. Conclusion : Clinically, none of the patients showed relapse of anterior open bite and the vertical stability is highly influenced by orthodontic treatment after the operation. In this study, BSSRO surgery is considered to be a rather reliable procedure that restores stability to skeletal class III malocclusion patients with slight anterior open bite.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.2
• /
• pp.47-52
• /
• 2017

In this paper, CMOS SAR A/D converter 1.8V supply for the design of an A/D converter having an middle speed for the biological signal processing was designed. This paper proposes design of a 10-bit SAR Analog to Digital Converter improving linearity driven by MSB node of C-DAC array divided into 4 equal parts. It enhances linearity property, by retaining the analog input signal charging time at MSB node. Because MSB node samples analog input, it enhances resolution through getting initial input signal precisely. By using split capacitor on C-DAC array, it reduced chip size and power dissipation. The Proposed SAR A/D Converter is fabricated in 0.18um CMOS and measured 7.5 bits of ENOB at sampling frequency 4MS/s and power supply of 1.8V. It occupies a core area of $850{\times}650um^2$ and consumes 123.105uW. Therefore it results in 170.016fJ/step of FOM(Figure of Merit).

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.5
• /
• pp.87-97
• /
• 2016

This work proposes a time-shared 10b DAC based on a two-step resistor string to minimize the effective area of a DAC channel for driving each AMOLED display column. The proposed DAC shows a lower effective DAC area per unit column driver and a faster conversion speed than the conventional DACs by employing a time-shared DEMUX and a ROM-based two-step decoder of 6b and 4b in the first and second resistor string. In the second-stage 4b floating resistor string, a simple current source rather than a unity-gain buffer decreases the loading effect and chip area of a DAC channel and eliminates offset mismatch between channels caused by buffer amplifiers. The proposed 1-to-24 DEMUX enables a single DAC channel to drive 24 columns sequentially with a single-phase clock and a 5b binary counter. A 0.9pF sampling capacitor and a small-sized source follower in the input stage of each column-driving buffer amplifier decrease the effect due to channel charge injection and improve the output settling accuracy of the buffer amplifier while using the top-plate sampling scheme in the proposed DAC. The proposed DAC in a $0.18{\mu}m$ CMOS shows a signal settling time of 62.5ns during code transitions from '$000_{16}$' to '$3FF_{16}$'. The prototype DAC occupies a unit channel area of $0.058mm^2$ and an effective unit channel area of $0.002mm^2$ while consuming 6.08mW with analog and digital power supplies of 3.3V and 1.8V, respectively.

• The Korean Journal of Nuclear Medicine
• /
• v.34 no.1
• /
• pp.82-93
• /
• 2000

Purpose: We characterized the signals obtained from the components of a small gamma camera using Nal(Tl)-position sensitive photomultiplier tube (PSPMT) and optimized the parameters employed in the modules of the system. Materials and Methods: The small gamma camera system consists of a Nal(Tl) crystal ($60{\times}60{\times}6mm^3$) coupled with a Hamamatsu R3941 PSPMT, a resister chain circuit, preamplifiers, nuclear instrument modules (NIMs), an analog to digital converter and a personal computer for control and display. The PSPMT was read out using a resistive charge division circuit which multiplexes the 34 cross wire anode channels into 4 signals (X+, X-, Y+, Y -). Those signals were individually amplified by four preamplifiers and then, shaped and amplified by amplifiers. The signals were discriminated and digitized via triggering signal and used to localize the position of an event by applying the Anger logic. The gamma camera control and image display was performed by a program implemented using a graphic software. Results: The characteristics of signal and the parameters employed in each module of the system were presented. The intrinsic sensitivity of the system was approximately $8{\times}10^3$ counts/sec/${\mu}Ci$. The intrinsic energy resolution of the system was 18% FWHM at 140 keV. The spatial resolution obtained using a line-slit mask and $^{99m}Tc$ point source were, respectively, 2.2 and 2.3 mm FWHM in X and Y directions. Breast phantom containing $2{\sim}7mm$ diameter spheres was successfully imaged with a parallel hole collimator. The image displayed accurate size and activity distribution over the imaging field of view Conclusion: We proposed a simple method for development of a small gamma camera and presented the characteristics of the signals from the system and the optimized parameters used in the modules of the small gamma camera.

• Radiation Oncology Journal
• /
• v.18 no.2
• /
• pp.79-84
• /
• 2000

Purpose : To evaluate the effectiveness and tolerance of postoperative e지ernai beam radiotherapy for patients with low grade glioma of the brain and define the optimal radiotherapeutic regimen. Materials and Methods : Between June, 1985 and May, 1998, 72 patients with low grade gliomas were treated with postoperative radiotherapy immediately following surgery. Median age was 37 years with range of 11 to 76 years. Forty one patients were male and 31 patients were female with male to female ratio of 1.3:1. Of those patients, 15 underwent biopsy alone and remaining 57 did subtotal resection. The distribution of the patients according to histologic type was as follows: astrocytomas-42 patients (58$\%$), mixed oligodendrogliomas-19 patients (27$\%$), oiigodendrogliomas-11 patients (15$\%$). Two patients were treated with whole brain irradiation followed by cone down boost and remaining 70 patients were treated with localized field with appropriate margin. Ail of the patients were treated with conventional once a day fractionation. Most of patients received total tumor dose of 5000 $\~$ 5500 cGy. Results : The overall 5 and 7 year survival rates for entire group of 72 patients were 61$\~$ and 50$\~$. Corresponding disease free survival rates for entire patients were 53$\~$ and 45$\~$, respectively. The 5 and 7 year overall survival rates for astrocytomas, mixed oligodendrogiiomas, and oligodendrogiiorras were 48$\%$ and 45$\%$, 76$\%$ and 56$\%$, and 80$\%$ and 52$\%$, respectively. Patients who underwent subtotal resection showed better survival rates than those who did biopsy alone. The overall 5 year survival rates for sub total resection patients and biopsy alone patients were 57$\%$ and 43$\%$, respectively. Forty six patients who were 40 years or younger survived batter than 26 patients who were 41 years or older (overall survival rate at 5 years, 69$\%$ vs 45$\%$). Although one patient was not able to complete the treatment because of neurological deterioration, there was no significant treatment related acute toxicities. Conclusion : Postoperative radiotherapy was safe and effective treatment for patients with low grade gliomas. However, we probably need prospective randomized trial to define optimal treatment timing and schedule for low grade gliomas and select patient group for different treatment philosophies.