• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.10
• /
• pp.1136-1141
• /
• 2007

In this paper, we designed and fabricated EM wave absorbers using Sendust, $Al(OH)_3$ and CPE(Chlorinated Polyethylene). We compared the absorption properties of samples containing 0 wt.%, 3 wt.%, 5 wt.%, 7 wt.% of $Al(OH)_3$. The optimized composition ratio of $Al(OH)_3$ is 5 wt.%, and the absorption property curve just has the tendency to improve at 5 wt.% of $Al(OH)_3$. And we used this characteristics to design the double-layered EM wave absorber. The double-layered EM wave absorber has thickness of 2 mm and has absorption ability more than 18.5 dB at a wireless LAN frequency band using 2.4 GHz.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.04a
• /
• pp.29-34
• /
• 2004

Generally, a silicone rubber and a chloride polyethylene(CPE) have been used for the development of high-performance composite EM(ElectroMagnetic) wave absorbers. In this study, the EM wave absorption abilities for natural lacquer which is newly suggested in this study as a binder for composite EM wave absorbers were investigated to develop an improved EM wave absorbers. In addition, MnZn ferrite composite EM wave absorbers mixed with the natural lacquer were prepared and their absorption ability was also investigated. MnZn ferrite composite EM wave absorbers which employs the natural lacquer as a binder showed an improved EM wave absorption characteristics in comparison with the conventional binder such as a silicone rubber and a chloride polyethylene(CPE). The matching frequency and the absorption ability of EM wave absorbers mixed with natural lacquer can be controled the change of the thickness of them.

• Journal of the Korean Magnetics Society
• /
• v.17 no.6
• /
• pp.238-241
• /
• 2007

Ni-Cu-Zn ferrites were prepared by the co-precipitation. Physical properties and Microwave absorbing properties were investigated in Ni-Cu-Zn ferrite for the aim of microwave absorbers. From the analysis of X-ray diffraction patterns, we can see that all the particles have only a single phase spinel structure. The loss factor was maximum at sintering temperature $1100^{\circ}C$. The initial permeability of sintered ferrite obtained was an average of 50. We found that the $(Ni_{0.7}Cu_{0.2}Zn_{0.1}O)_{1.02}(Fe_2O_3)_{0.98}$ can be used in ferrite rubber composite microwave absorber when sintering temperature at $1100^{\circ}C$.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.622-629
• /
• 2003

Generally, a silicone rubber and a chloride polyethylene(CPE) have been used for the development of high-performance composite EM(ElectroMagnetic) wave absorber. In this study, the EM wave absorption abilities for natural lacquer which is newly suggested in this study as a binder for composite EM wave absorber were investigated to develop an improved EM wave absorber In addition, MnZn ferrite composite EM wave absorber mixed with the natural lacquer were prepared and their absorption ability was also investigated. MnZn ferrite composite EM wave absorber which employs the natural lacquer as a binder showed an improved EM wave absorption characteristics in comparison with the conventional binder such as a silicone rubber and a chloride polyethylene(CPE). The matching frequency and the absorption ability of EM wave absorber mixed with natural lacquer can be controled the change of the thickness of them.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.10a
• /
• pp.153-156
• /
• 2000

The remarkable progress of electronics and radio communications technology has made our life abundant. On the other hand, the countermeasure of EMC becomes more important socially according to the increased use of electromagnetic waves. It had been required that the absorbing ability of an electromagnetic wave absorber is more than 20 dB, the bandwidth of which is required through 30 MHz to 1,000 MHz for satisfying the international standard about an anechoic chamber for EMI/EMS measurement. From November of 1998, however, the CISPR11 has accepted the extended frequency band from 30 MHz to 18 GHz in the bandwidth of EMI measurement. In this paper, we proposed the cutting com-shaped type satisfying the above requirments and carried out broadband design using the equivalent material constants method. Moreover, we have fabricated it and compared its characteristics with simulated one.

• Journal of Navigation and Port Research
• /
• v.34 no.1
• /
• pp.15-19
• /
• 2010

Recently, the wireless LAN system is rapidly growing because of its convenience of high speed communication. However, the wireless LAN systems at indoor places occur multi-propagation path by reflected waves from walls, ceilings, floors, and desks. Multipath problems cause transmission errors and degradation of communication speed. These problems can be solved by using EM wave absorbers. In this paper, we analyzed property of Graphite and derived the optimum ratio of Graphite: CPE to develop EM wave absorber for the wireless LAN system. First, we fabricated several samples in different composition ratios of Graphite and CPE, and then measured the reflection coefficient of each samples. Material constants of permittivity and permeability were calculated using the measured data and designed EM wave absorber. Secondly, the EM wave absorber was fabricated and tested on the base of the simulation data. As a result, it showed that the EM wave absorber in 1.7 mm thickness with the ratio of Graphite: CPE=50:50 wt.% has excellent absorption ability more than 27 dB at 5.2 GHz.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.4
• /
• pp.721-726
• /
• 2000

The remarkable progress of electronics and radio communications technology has made our life abundant. On the other hand, the countermeasure of EMC becomes more important socially according to the increased use of electromagnetic waves. It had been required that the absorbing ability of an electromagnetic wave absorber is mote than 20 dB, the bandwidth of which is required through 30 MHz to 1,000 MHB for satisfying the international standard about an anechoic chamber lot EMl/EMS measurement. From November of 1998, however, the CISPR11 has accepted the extended frequency band from 30 MHz to 18 GHz in the bandwidth of EMI measurement. In this paper, we proposed the cutting corn-shaped type satisfying the above requirements and carried out broadband design using the equivalent material constants method. Moreover, we have fabricated it and compared its characteristics with simulated one.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.3
• /
• pp.222-229
• /
• 2009

In this paper, we designed and fabricated the EM wave absorbers for preventing the reduction of the communication range when RFID Tag is approached to a metal plate. The EM wave absorber samples were fabricated with difference composition ratios of Amorphous metal powder and CPE, the absorption abilities of which were simulated by substituting different thicknesses of the EM wave absorbers. Then the EM wave absorbers are manufactured based on the simulated results. By using the EM wave absorbers, we have confirmed the improvement effect of RFID tag antenna and the increase of communication range of RFID system. As a result, it was cleary shown that the communication range of RFID system is improved by adopting the EM wave absorber with the composition ratio of Amorphous metal powder:CPE=80:20 wt.% and the thickness of 4 mm. Thus, it was confirmed that the proposed EM wave absorber can increase the communication range of RFID system from 0.8 m to 5.2 m in UHF band.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.113-118
• /
• 2006

Recently, wireless LANs are often applied in home or office because of its various of convenience. Frequency rage of wireless LANs specified by IEEE 802.11b is at 2.4 GHz. The bluetooth, the microwave oven, and the PDA(Personal Digital Assistants) uses ,however, the same frequency band. So problems will be produced in these environments, such as multi-pass interference and system-to-system interference. These problems can be eliminated by using EM wave absorber. In this paper, we designed and fabricated EM wave absorber using Sendust, $Al(OH)_3$, and CPE. The double-layered EM wave absorber with thickness of 1.5 mm has absorption ability more than 10 dB at 2.4 GHz.

• Journal of Navigation and Port Research
• /
• v.34 no.3
• /
• pp.161-166
• /
• 2010

The bandwidth of detecting radars used for military purpose is increasingly broadened, and recently, the frequency band of the detecting radars is expanding to millimeterwave bands of the millimeterwave bands of 35 GHz and 94 GHz. Since, especially, it is essential and important to fabricate and develop EM wave absorber with the absorption ability more than 10 dB in 94 GHz band, the EM wave absorber was manufactured based on the design method by FDTD simulation. As a result, the developed EM wave absorber with the composition ratio of Binder(CPE with additional materials) : Carbon = 70 : 30 wt.% has the thickness of 0.7 mm and the absorption ability more than 14 dB in the frequency range of 94 GHz.