• 한국해양학회지
• /
• v.25 no.2
• /
• pp.62-73
• /
• 1990

An experimental study is performed in order to catch the characteristics of the flow field at arrested salt wedge, using a rectangular open channel. Arrested salt wedge is generally so stable that the observations are easy, but velocities and interfacial waves are measured with the aid of visualization method, by injection of fluorescent dyes. The density interface, which is defined as the zone of maximum density variation with depth, exists in about 0.5 cm below the visual interface, and vertical density profile is quite well satisfied with Homeborn model. Interfacial layer has high turbulent intensity and its thickness decreases as the overall Richardson number increases and has magnitude of roughly 17% of upper layer. Cross-sectional velocity distribution just shows the influence of a side-wall friction and in the upper layer vertical velocity profile also becomes uniformly as Reynolds number increases, but in the lower layer it shows nearly parabolic type. Supposes that we divide salt wedge into three domains, that is, river mouth, intermediate and tip zone, entertainment coefficient is small at the intermediate zone and large at the river mouth and the tip zone. River mouth or intermediate zone has comparatively stable interface and capillary wave therefore s produced and propagated downstream. On the other hand, tip zone is very unstable, cusping ripple or bursting ripple is then produced incessantly. Arrested salt wedge form is nearly linear and has no relation to densimetric Froude number and Reynolds number.

• Journal of Korean Society of Steel Construction
• /
• v.19 no.6
• /
• pp.695-702
• /
• 2007

The Thermal Prestressing Method for continuous composite girder bridges is a new design and construction method developed to induce initial composite stresses in the concrete slab at negative bending regions. Due to the induced initial stresses, prevention of tensile cracks at the concrete slab, reduction of steel girder section, and reduction of reinforcing bars are possible. Thus, the construction efficiency can be improved and the construction can be made more economical. The method for determining the optimum heating region of the thermal prestressing method has not been established although such method is essential for improving the efficiency of the design process. The trial-and-error method used in previous studies is far from efficient, and a more rational method for computing optimal heating region is required. In this study, an efficient method for determining the optimum heating region in using the thermal prestressing method was developed based on the neural network algorithm, which is widely adopted to pattern recognition, optimization, diagnosis, and estimation problems in various fields. Back-propagation algorithm, commonly used as a learning algorithm in neural network problems, was used for the training of the neural network. Through case studies of two-span and three-span continuous composite girder bridges using the developed procedure, the optimal heating regions were obtained.

• The Journal of Engineering Geology
• /
• v.27 no.3
• /
• pp.233-244
• /
• 2017

We conducted hydraulic fracturing experiments on cement samples to investigate the dependency of fracture propagation on the viscosity of injection fluid and the in situ stress state. Ten cubic samples (20 cm side length) were produced using cement that was cured in water for more than one month. Samples were placed in a tri-axial compression apparatus with three independent principal stresses. An injection hole was drilled and the sample was hydraulically fractured under a constant injection rate. We measured injection pressures and acoustic emissions (AE) during the experiments, and investigated the fracture patterns produced by hydraulic fracturing. Breakdown pressures increased exponentially with increasing viscosity of the injection fluid. Fracture patterns were dependent on differential stress (i.e., the difference between the major and minor principal stresses). At low differential stress, multiple fractures oriented sub-parallel to the major principal stress axis propagated from the injection hole, and in some samples the fracture orientation changed during propagation. However, at high differential stress, a single fracture propagated parallel to the major principal stress axis. AE results show similar patterns. At low differential stress, AE source locations were more widespread than at high differential stress, consistent with the fracture pattern results. Our study suggests that hydraulic fracturing during shale gas extraction should be performed parallel to the orientation of minimum differential stress.

• Journal of KIISE
• /
• v.43 no.11
• /
• pp.1233-1244
• /
• 2016

In the IoT network environments for LLNs(Low power and Lossy networks), IPv6 Routing Protocol for Low Power and Lossy networks(RPL) has been proposed by IETF(Internet Engineering Task Force). The goal of RPL is to create a directed acyclic graph, without loops. As recommended by the IETF standard, RPL route recovery mechanisms in the event of a failure of a node should avoid loop, loop detection, DIO Poisoning. In this process, route recovery time and control message might be increased in the sub-tree because of the repeated route search. In this paper, we suggested RPL route recovery method to solve the routing overhead problem in the sub-tree during a loss of a link in the RPL routing protocol based on IoT wireless networks. The proposed method improved local repair process by utilizing a route that could not be selected as the preferred existing parents. This reduced the traffic control packet, especially in the disconnected node's sub tree. It also resulted in a quick recovery. Our simulation results showed that the proposed RPL local repair reduced the recovery time and the traffic of control packets of RPL. According to our experiment results, the proposed method improved the recovery performance of RPL.

• The Journal of the Acoustical Society of Korea
• /
• v.23 no.2
• /
• pp.146-161
• /
• 2004

There have been always some difficulties in target setting and conditioning of acoustic performances of the Korean traditional music hall due mainly to the lack of the information on the sound radiation characteristics of Korean musical sources. In this study, the radiation characteristics of four typical Korean traditional musical sources were investigated in precision and their usage was demonstrated: The selected musical sources were Gayageum (string), Daegeum (woodwind), Jango (drum), and Pansori Chang (vocal performance). Each sound source was located at the center of a semi-anechoic chamber and the directivity was determined by the measured sound pressure levels in every 10° angular position, for both vertical and horizontal directions. The directivity pattern of Gayageum varies from a uniform to a complex pattern having many side lobes with the increase of frequency. The main radiation of Daegeum is toward the upward direction. The directivity pattern of Jango is clearly a side-oriented one and the left direction intensity is sharper than its right side at low frequencies. For the Chang, the directivity pattern change from a uniform pattern to a frontally directed one as the frequency goes high. Measured directional and spectral characteristics of traditional Korean music sources were implemented into the computation of architectural acoustic measures for the Busan National Korean Traditional Music Hall which is under construction. Parameters such as RT, SPL, C80, IE, STI were calculated at two receiver positions by using a ray tracing technique. Significant differences in the acoustic measures at receiver positions were observed between the results in using the omni-directional source and the directional one. It is thought that the suggested source data and design method can be used as a basic reference in the future acoustic design of performance halls for the Korean traditional music.

• Korean Journal of Cognitive Science
• /
• v.16 no.4
• /
• pp.369-386
• /
• 2005

Although Intelligent Tutoring System(ITS) offers individualized learning environment that overcome limited function of existent CAI, and consider many learners' variable, there is little development to be using at the sites of schools because of inefficiency of investment and absence of pedagogical content knowledge representation techniques. To solve these problem, we should study a method, which represents knowledge for ITS, and which reuses knowledge base. On the pedagogical content knowledge, the knowledge in education differs from knowledge in a general sense. In this paper, we shall primarily address the multi-complex structure of knowledge and explanation of learning vein using multi-complex structure. Multi-Complex, which is organized into nodes, clusters and uses by knowledge base. In addition, it grows a adaptive knowledge base by self-learning. Therefore, in this paper, we propose the 'Extended Neural Logic Network(X-Neuronet)', which is based on Neural Logic Network with logical inference and topological inflexibility in cognition structure, and includes pedagogical content knowledge and object-oriented conception, verify validity. X-Neuronet defines that a knowledge is directive combination with inertia and weights, and offers basic conceptions for expression, logic operator for operation and processing, node value and connection weight, propagation rule, learning algorithm.

• Proceedings of the Korea Technology Innovation Society Conference
• /
• 1999.05a
• /
• pp.539-563
• /
• 1999

이 논문은 정보통신정책 목표와의 연관성 속에서 정보통신연구개발사업의 우선순위를 설정함과 아울러 비용효과성에 바탕을 둔 적정 자원배분 도출하는데 주안점을 두고 있다. 복합적인 목표를 가진 연구개발사업에 대해 사업부문별 그리고 기술분야별로 객관적이면서도 설득력있는 자원배분지침을 마련하기 위하여 본 연구는 다기준의사결정(MCDA: Multi-criteria Decision Analysis) 방법을 채택하고 있다. 이 방법론에서는 사업의 목표와 우선순위 판단기준 및 사업대안이 계층적으로 연계된 분석구조를 설계하여 사업대안의 우선순위를 먼저 설정하고, 여기에 정수계획법(Integer Programming)을 결합하여 사업의 목표와 연계된 비용-편익 관계(Cost-benefit relationship)를 최적화하는 바탕 위에서 사업대안별 자원배분 시나리오를 제시하게 된다. 이러한 절차로 사업부문별 및 기술분야별로 각각 도출된 8개의 자원배분 시나리오는 자원배분 경향치의 안정성(Stability) 분석과 자금지원의 과부족에 대한 현실적 적합성(Relevance) 분석을 거쳐 최종적으로 하나의 적정 자원배분방안으로 수렴되도록 하였다. 우선순위 설정에 기초가 되는 사업대안의 편익에 대한 자료는 전문가의 정성적 판단을 통해 수집되었는데, 이를 위해 정보통신기술 부문에서 활동 중인 중견 이상의 총 58명의 산학연 전문가를 대상으로 한 조사를 실시하였다. 먼저, 기초기반ㆍ전략기술개발사업, 연구ㆍ기술인력양성사업, 산업응용기술개발사업, 기술기반조성사업 등 4대 사업부문에 대해서는 (ⅰ) 정보통신 기술능력의 축적, (ⅱ) 정보통신산업의 경쟁력 강화, (ⅲ) 정보통신기반의 기술고도화, (ⅳ) 정보화를 위한 기술역량의 제고 등 주요 사업의 편익을 나타내는 4개 기준으로 우선 순위를 판단하였고, 정보통신망기술, 전파 및 RF 기술, 정보처리기술, 반도체 소자/설계 기술 등 13개 기술분야에 대해서는 (ⅰ) 공공정책적 임무에 대한 기여, (ⅱ) 기술자립기반의 확충, (ⅲ) 기술발전성과 기술적 파급효과, (ⅳ) 기술적 산물의 시장잠재력 등 기술분야 연구개발을 통한 편익을 나타내는 4개 기준으로 우선순위를 판단하였다. 우선순위는 사업대안에 대한 가중치로 표시되었고, 적정 자원배분방안은 추정된 총예산 규모에 따라 지원수준에 대한 일정한 제약조건 하에서 비용-편익 관계에 따른 자원의 최적 할당량으로 제시되었다. 본 연구는 총예산 규모의 가변성, 사업 및 기술분야 대안의 분류체계에 대한 공감대 부족, 사업목표의 상호연관성과 우선순위 판단기준의 부분적 중첩성 등 여러 제약요인이 있어 도출된 구체적인 수치보다는 방향성에 더 큰 의미를 부여하는 것이 바람직하다. 그러나, 이러한 연구의 한계에도 불구하고 도출된 우선순위와 적정 자원배분방안은 문제해결의 실행타당성을 감안하여 비교적 객관적이고 균형있는 결과로 판단된다.

• Tunnel and Underground Space
• /
• v.16 no.6 s.65
• /
• pp.526-535
• /
• 2006

An experimental study was carried out on a reduced scale tunnel model to grasp the behavioral feature of fire-induced smoke in the long tunnels. Based on Froude modeling, the 1/50 scaled tunnel model (20 m long) was constructed by acrylic tubes and paraffin gas was released inside the tunnel to simulate the 20 MW fire-induced smoke. me test results show, that after approximately 2 minutes of fire generation, was descended from the tunnel ceiling through the decrease of buoyancy, then it was symmetrically propagated about 90 meters for 4 minutes before jet fans were operated. The smoke was effectively controlled when the jet fans were operated and an air stream velocity was getting closed to reach a critical velocity (the minimum air velocity that requires to suppress the smoke spreading against the longitudinal ventilation flow during the tunnel fire situations). It was also found out that a range of smoke was spreaded about 3 meters from the origin of fire but the range was not propagated to the escape direction anymore. The early stage of the In operation, however, showed that the smoke was hardly controlled. It means that the operation of emergency ventilation system has many dangerous factors such as an intercepting breathing zone.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.6 no.3
• /
• pp.57-66
• /
• 2007

Weaving is defined as the crossing of two or more traffic streams traveling in the same general direction along a significant length of highway without the aid of traffic control devices. Compared with other freeway sections, perturbation is easy to happen at weaving section. Because there are a lot of lane-changing maneuvers at the weaving section, traffic is subject to turbulence in excess of that normally presents on freeway basic section. This turbulence causes operational problems and its impact must be considered. The purpose of this paper is to perform a basic study on flow characteristics by lane, which can be achieved through analyzing breakdown phenomenon in the microscopic approach. The study made use of data derived from the aerial photography for the microscopic analysis. This research produced the 30-second interval data such as flows, speeds, and densities for the macroscopic analysis and derived the vehicular data to draw time-space diagram for the microscopic analysis. The paper analyzed the traffic characteristics using flows, speeds and densities variation and investigated the conditions of breakdown occurrence with the time-space diagrams. The breakdown phenomenon was identified at weaving section and the propagation from free flow to synchronized flow was observed in this study. In the future, the findings help develop the traffic operational algorithm to manage the traffic congestion under ubiquitous circumstance since the conditions of breakdown Phenomenon can be understood more.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.26 no.5
• /
• pp.297-305
• /
• 2006

The thermal ratcheting deformation at the reactor baffle and upper internal structure of the liquid metal reactor (LMR) can occur due to movement of the hot sodium free surface. In in-service inspection of reactor internals of LMR, a new inspection technique should be developed for the detection of the thermal ratcheting damage. In this study, an inspection technique using ultrasonic guided wave is proposed for the detection of the thermal ratcheting damage of cylindrical vessels. A 316L stainless steel cylindrical shell specimen has been prepared. The thermal ratchet structural tests were cyclically performed by heat-up up to $550^{\circ}C$ with steep temperature gradients along the axial direction after cool-down by cooling water. Ultrasonic guided wave propagation has been characterized by analysis of dispersion curve of the stainless steel plate. The zero-order antisymmetric $A_0$ guided wave has been selected as the optimal mode for detection of the ratcheting deformation. It is confirmed that the thermal ratcheting deformation can be detected by the measurement of transit time difference of circumferentially propagated $A_0$ guided waves.