• Proceedings of the KSRS Conference
• /
• 2008.03a
• /
• pp.25-28
• /
• 2008

본 논문에서는 GB-SAR의 간섭기법을 이용하여 물체의 변위 측정에 대한 정밀도를 조사하였으며, 또한 대기보정을 거친 후 정밀도의 변화에 대해서 확인하였다. GB-SAR 시스템에서 안테나는 중심주파수 5.3 GHz, 밴드 폭 600 MHz인 C밴드 안테나를 사용하였고, 신호의 증폭을 위해 마이크로파 앰프를, 다편파 측정 및 분석을 위하여 스위치를 장착하였다. 레일의 총 길이는 5 m, 이동간격은 5 cm, 최대 관측 거리는 약 200 m이다. 변위 측정에 사용된 이동산란체는 trihedral corner reflector로서, 시스템 전방 약 160 m에 위치하며 시스템 방향으로 1 mm에서 40 mm 전진시켰다. 이동산란체의 실제 변위와 GB-SAR 시스템의 위상변화로 관측된 변위의 상관계수는 편파에 따라 0.9995에서 0.9996으로 나타났다. 마이크로파의 전파과정에서 거리와 습도에 따른 지연 효과를 고려하기 위하여 대기보정식을 구하였으며, 이를 이동산란체의 위상에 적용한 결과 상관계수는 0.9997에서 0.9999의 값을 나타냈고 40 mm 이동시 오차가 1 mm 이내를 나타냄으로서 대기보정을 통한 결과가 더 높은 정밀도를 나타냄을 확인하였다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.15 no.2
• /
• pp.269-275
• /
• 1997

Car Navigation System with Global Positioning System (GPS) can display position direction and the shortest cut of one's destination. The position datum for GPS in World Geodetic System 1984 (WGS-84) coordinates system need to transform Bessel coordinates system and process Map projection. Since 1987, GPS has used the WGS-84. WGS-84 is a geocentric equipotential ellipsoid of revolution which is defined four parameters. In this study, by comparing the digitized topographical map with the digital map of GPS datum we can consider the technique of WGS84 digital map.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.19 no.6
• /
• pp.420-425
• /
• 1999

Time of flight diffraction(TOFD) method is used in nondestructive tests of piping and pressure vessels because of its advantages over a pulse echo technique: its speed, objectivity, repeatability and its insensitivity to specimen surface conditions and discontinuity orientation. But it is the one of weak points in TOFD method that it has the dead zone in sub-surface resolution induced by lateral waves. We solved the dead-zone problem near the sub-surface by using the deconvolution method and the developed ultrasonic testing system showed high performance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.4A
• /
• pp.401-407
• /
• 2010

As according to utilizing mobile devices, the real time locating system to provide high quality service is required. RTLS based on wireless communication can be damaged from radio shadow areas which guarantee the line of sight. To cope with the radio shadow area, this paper proposes the performance improvement method using assistant tags and a directional antenna based reader. In addition, this paper also provides the design and implementation of RTLS and experiments for performance evaluation. The result shows that a success rate is increased up to 38% and accuracy is a CEP of 1.13 meters.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.12
• /
• pp.1359-1369
• /
• 2007

This paper describes the technique of satellite direction finding and main beam steering of the adaptive array antenna system which is used for mobile TT&C(Tracking Telemetry&Command) system. To be able to control the satellite on mobile vehicle while moving, the relative directional information of the satellite to the mobile vehicle is necessary to make main beam to the direction of satellite. To do this MUSIC, which is one of the super-resolution algorithm of wave direction finding, is used and then the performance analysis and quantization problem of phase shifter are addressed. This paper is valuable in the respect of showing feasibility of designing the moble TT&C using adative array antenna system.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.1
• /
• pp.1-15
• /
• 2015

In this invited paper, the authors give an overview of the new design technology for a metallic backplane-less metamaterial(MM) absorber and discuss a selection of examples. In contrast to a common MM absorber structure, the metallic pattern layer of the presented structure is placed facing toward the incident wave propagation direction to reduce the radar cross section(RCS) due to the metallic pattern itself at frequencies other than the targeted absorption frequency bands. The ability of the MM backplane-less absorber to exhibit broadband absorption performance and irregular surface applications will be discussed.

• Journal of the Korean Chemical Society
• /
• v.39 no.1
• /
• pp.14-22
• /
• 1995

This paper is concerned with the design of optimal surface heating patterns that result in focusing acoustic energy inside a subsurface target volume at a specified target time. The surface of the solid is heated by an incident laser beam which gives rise to shear and compressional waves propagating into the solid. The optimal heating design process aims to achieve the desired energy focusing at the target with minimal laser power densities and minimal system disturbance away from the target. The optimality conditions are secured via the conjugated gradient method and by the finite element method along with using the half-space Green's function matrix. Good quality energy focusing is achived with the optimal designs reflecting the high directivity of the photothermally generated shear wave patterns.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.05a
• /
• pp.554-558
• /
• 2002

In this paper, we analysed the technical characteristics of a universal shipborne automatic identification system using self-organizing time division multiple access in the VHF marine mobile band. IMO's Marine Safety Committee approved revision of chapter V of the Safety of Life at Sea(SOLAS) Convention in 73rd meeting. According to this revision, AIS will become a nandatary carriage requirement by 01 July 2002. AIS is a broadcast system, operating in the VHF marine band. It is capable of sending infomation such as would be beneficial to the safety of navigation and the identification and monitoring of maritime traffic. It is absolutely necessary to analyse the related international and domestic specifications for the AIS implementation and installation.

• The Journal of Society for e-Business Studies
• /
• v.19 no.4
• /
• pp.31-43
• /
• 2014

These days a lot of cyber attacks are exploiting the vulnerabilities of S/W. According to the trend of vulnerabilities is announced periodically, security directions are suggested and security controls are updated with this trend. Nevertheless, cyber attacks like hacking during the year 2011 are increased by 81% compared to 2010. About 75% of these cyber attacks are exploiting the vulnerabilities of S/W itself. In this paper, we have suggested a VIR model, which is a spread model of malware infection for measuring economic loss by S/W vulnerability, by applying the SIR model which is a epidemic model. It is applied to estimate economic loss by HWP(Hangul word) S/W vulnerabilities.

• The KIPS Transactions:PartC
• /
• v.12C no.3 s.99
• /
• pp.361-368
• /
• 2005

Internet mail has become a common communication method around the world because of tremendous Internet service usage increment. In other respect, Most Internet users' mail addresses are exposed to spammer, and the damage of Junk mail is growing bigger and bigger. These days, Junk mail delivery problem is becoming more serious, because this is used for an attack or propagation scheme of malicious code. It's a most dangerous dominant cause for computer system accident. This paper shows the Junk mail filtering model and implementation which is based on FQDN (Fully Qualified Domain Name) check and evaluates it for proposing advanced scheme against Junk mail.