• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.4 no.3
• /
• pp.274-278
• /
• 2003

The numerical analysis indicated that the vibration response reduced sharply at the three times of tunnel diameter. Visual display of vibration response was possible through 3-D FEM computer program, and displacement of structure, particle velocity were obtained as output. It was found that the vibration velocity was maximum at distance one to two times of tunnel diameter for the given simplified blast loadings. The results of numerical analysis were compared with empirical based predictive equation of blasting. The empirical equation showed a good agreement with 3-D FEM results at a certain range of tunnel depth in this particular type of ground conditions.

• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.58-58
• /
• 2011

동해를 전파하는 지진해일은 다른 지역에서 발생하는 지진해일과 비교하였을 때 상대적으로 파장이 짧고, 파장에 비해 먼거리를 전파한다. 따라서 지진해일이 전파할 시 물리적인 분산효과가 매우 중요하다. 그러므로 동해에서 발생하는 지진해일을 수치모의 할 때는 분산효과가 충분히 고려될 수 있는 선형 Boussinesq 방정식을 사용한다. 그러나 이를 직접 풀 경우에는 상당히 많은 시간이 소비되며 효율적이지 못하다. 이와 같은 단점을 극복하기 위해 기존의 연구에서는 leap-frog 기법을 사용하여 선형 천수방정식을 차분할 때 발생하는 수치분산항을 선형 Boussinesq 방정식의 분산항과 같은 형태를 가질 수 있도록 분산보정계수를 사용하여 수치모의를 수행하였다. 하지만 이때 사용된 지배방정식은 수심이 일정하다는 가정을 이용하여 유도된 것이므로, 실제 경사가 있는 지형을 통과할 때의 수치모의 결과는 정확하다고 할 수 없다. 본 연구에서는 이를 극복하기 위하여 바닥 지형이 1차원으로 변한다는 가정으로 새로운 지배방정식을 유도하였으며, 수심변화로 인해 새로 발생하는 항을 기존의 분산보정기법에 추가하였다. 또한 수심이 변화는 지형을 통과하는 지진해일의 분산효과가 충분히 고려되는지 확인하기 위하여 Gaussian hump를 이용하여 가상 지진해일을 원형 천퇴지형에 통과시키는 수치모의를 수행하였다. 결과의 비교를 위한 정확해가 없으므로, 비선형 Boussinesq 방정식을 직접 차분하여 푸는 FUNWAVE를 이용하여 동일한 조건으로 수치모의를 수행하였다. 수치모의 시 중심선에 4개의 가상 gage를 설치하였으며, 이를 통해 각각의 수치모의 실험에 대한 자유수면 변위를 관찰하여 비교하였다. 수치모의 결과에 대한 비교를 통하여 기존의 분산보정기법에 비해 본 연구에서 제안한 새로운 수치기법이 분산효과를 비교적 잘 반영하는 것으로 나타났으며, 비교적으로 실제 지형에 적용하였을 때 정확도 향상의 가능성이 높다고 판단하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.3B
• /
• pp.153-160
• /
• 2007

Placing antennas of low power base stations below surrounding buildings, as in urban microcells, makes propagation characteristics strongly dependent on the building environment. As a result, propagation in these urban microcells is non-isotropic, so that the assumption of circular cells used in planning of conventional cellular sys toms is no longer valid. Assuming circular cells leads to a more conservative system design, implying more base stations. This work investigates the effect of cell shape, due to non-isotropic propagation, on the out-of-cell interference and Erlang capacity of CDMA system. Propagation is described by measurement derived models for low antennas in a rectangular urban street grid. The analysis is done for soft handoff protocols.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.3
• /
• pp.51-56
• /
• 2014

TETRA(TErrestrial Trunked RAdio) provide specialized disaster radio communication services as a standard European for digital TRS(Trunked Radio System). Especially, DMO(Direct Mode Operation) feature is used effectively in the radio shadow areas which base station does not propagate radio signal because it can communicate directly with terminal to terminal without base station's relay function. However, to effectively used DMO feature, radio coverage prediction information should be provided to users. Therefore in this paper, we were calculated link budget of TETRA DMO terminals which were distributing and operating in the country and then predicted reaching distance about radio propagation to be applied with path loss model.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.10
• /
• pp.1017-1024
• /
• 2002

In this paper, we present the analysis of radio wave propagation characteristics in curved tunnels. Tunnel propagation models are performed in two cases which are using ray-tracing method for straight tunnels and geometrical optics extension to the standard hybrid waveguide model for curved ones. By regression analysis for measured power based on distance between the transmitter and the received antenna in tunnels that have 3.5 m $\times$ 6 m cross section and limited wall depth path loss are 0.19 dB/m for straight section and 0.68 dB/m for curved ones. By comparing model analysis with measurement in tunnels, it has been shown that the simulated results of tunnel propagation models are similar to the measured values.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.1
• /
• pp.36-43
• /
• 1988

A two phase model for the simulation of flame propagation has been developed and applied to a mixture of coal air. The effects associated with changes in the initial coal partial equivalence ratio and the initial diameter of particles on the structure of laminar flame propagation have been studied qualitatively and quantitatively. Especially the flame structure, the burning velocity, and the thermal behavior were evaluated. It was found that the radiative heat transfer absolutely dominates over the conduction mode. The increase in particle size was seen to contribute to an obvious increase in burning velocity for fuel lean and stoichiometric mixture. But for fuel rich mixture, the burning velocity was found to exhibit a weaker dependence on particle size.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.5 s.96
• /
• pp.465-471
• /
• 2005

A method of calculation fur propagating and focusing of focused beams generated in antenna arrays, using BPM(Beam Propagation Method), is presented in this paper. Based on the diffraction theory, the beam focusing and Propagation is studied specially for the case of the antenna way fed by the Rotman lens that is able to focus microwave power on its focal arc or generate multiple beams. There are difficulties in performing a full-wave simulation using a commercial EM simulation tool for propagating and focusing of beams because of the structural complexity and the feeding assignment of the antenna array. Therefore, as an alternative solution, the BPM is presented to calculate the beam propagation from the aperture-type antennas. From the point of view of optics, the propagations of the lens have been simplified from the Fresnel diffraction integral to the Fourier transform. Using Fourier Transform, a beam propagation method is developed to show improvement of the resolution by controlling the wavefront of wave Propagating from an aperture-type antenna array. The beam width(or spot size) and the intensity are calculated for a focused beam propagating from an array having $10\lambda$ of its size. For the beams with $20\lambda,\;30\lambda$, and $50\lambda$ of geometrical focal length, the half-power beam widths(or spot size) are about 1.1\lambda,\;1.3\lambda,\;and\;1.9\lambda$ respectively.

• 전자공학회논문지 IE
• /
• v.44 no.1
• /
• pp.27-32
• /
• 2007

This study was to suggest the predictive model of propagation, considering the effect by the multipath waves produced by the sending and receiving vehicles' left/right reflectors and the adjacent vehicles when the communication between the vehicles on the one-way two-lanes road in the urban city with a lot of traffic jams. Then, the radius of curved road was 600[m], the length of curved roads $52.4\sim471.2[m]$, and the bridge's pier of road was $5o\sim45o$. Also, it was simulated by changing the receiving vehicle located on the curved road's gap from minimum 3.3[m] to maximum 29.5[m], corresponding to the change of distance of the bridge's pier of road and curved road. As a result of this research above, in case of $5o\sim15o$ bridge's pier of road, it was within l[dB] regardless of the receiving vehicle's position on the curved road in case of propagation path loss. In case of $15o\sim45o$, it was approximately $1\sim8[dB]$ as the bridge's pier of road is changed. And, in case of propagation path, it found out that it was changed to $0.4\sim120[m]$ according to the change of bridge's pier of road. Then, the delay time of propagation was 400[nsec] as it produced 120[m] in the difference of propagation path.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.5
• /
• pp.193-199
• /
• 2010

In this paper, we propose a new metric to measure the dynamic connection states of Ad Hoc network. The new metric measures the total path break up time $\sum_{i}T_i$, where $T_i$ is the time period during which maximum cluster distance exceeds the radio range. $T_i$ can be calculated from the maximum cluster distance function of time, which can be computed from the node position samples of mobility model. The proposed metric can be used as a total system metric as well as an individual connection metric.

• Proceedings of the Korean Information Science Society Conference
• /
• 2011.06d
• /
• pp.167-170
• /
• 2011

많은 측위 알고리즘이 참조노드가 정사각형의 모서리에 위치한다고 가정 하고 있지만, 실제로는 다각형이 되거나 매쉬형으로 배치될 수 있다. 신호세기를 달리함으로써 동심원을 구성하여 측위하는 WMRL(Weighted Multiple Rings Localization)도 기본적으로 참조노드의 배치가 정사각형으로 가정하고 있다. 본 논문에서는 참조노드는 임의로 배치되어 있는 경우에서의 측위로 확장한다. 즉, 측위하는 센서 노드가 수신 가능한 전파를 송신하는 모든 참조노드로부터 링 번호를 기반으로 자신의 위치를 추청한다. WMRL의 다중 신호 세기 링 방식을 채용, 각 링의 도달거리를 기반으로 센서노드가 자신과 참조노드 간의 거리를 유추하고, 최소자승법을 이용해 자신의 좌표를 계산하는 알고리즘을 제안한다. 실험 결과 제안한 알고리즘은 에러가 없는 환경과 다수 참조노드 환경에서 WMRL 및 WCL(Weighted Centroid Localization)보다 2배 이상의 성능향상을 보였으며, 에러가 있는 전파환경에서는 DV-hop 보다 평균 6%, WCL 및 WMRL에는 평균 16% 정도의 성능 향상 결과를 보였다.