• Magazine of the Korean Society of Hazard Mitigation
• /
• v.11 no.1
• /
• pp.95-98
• /
• 2011

최근 국내에서 사회기반시설물에 대한 안전관리 네트워크 통합시스템 구축을 위한 국가핵심과제가 진행되고 있다. 본 연구에서는, 위 과제의 일환으로 진행 중인 철도교량의 구조건전성 모니터링 시스템 구축 및 운용에 대하여 기술하였다. 효율적인 철도교량 모니터링 시스템 구축을 위하여 다양한 종류의 스마트센서가 적용되었으며, 웹 기반의 네트워킹을 통해 외부에서 모니터링 시스템을 원격으로 접속, 제어 할 수 있도록 하였다. 철도교량의 국부 손상을 모니터링 하기 위해 압전센서를 활용한 무선 임피던스 노드를 적용하였고, 구조물 전체의 거동 분석을 위하여 가속도 센서 및 광섬유 센서를 적용하였다. 구조물의 장기 계측을 통한 철도 주행 및 외부 환경에 따른 거동 분석을 수행하였으며, 손상 평가를 위한 신호처리 알고리즘이 적용되었다.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2008.06a
• /
• pp.411-413
• /
• 2008

본 연구의 목적은 DGPS 기법을 이용하여 장대교량의 거동을 모니터링하는 기술을 개발하는데 있다. GPS 센서를 이용한 교량거동 모니터링 기술은 다수의 GPS 센서를 시설물 외부에 설치하여 전체적인 거동상태를 모니터링 함으로써 순간적인 세부변위는 물론 장기간의 관측을 통한 기초침하, 크리프 릴렉세이션 등의 거동까지 실시간으로 모니터링 할 수 있는 기술이다. 본 연구의 최종 성과물은 안전관리 대상 주요 시설물의 거동을 비접촉 방식으로 감시하고 그 결과를 그래픽으로 화면을 통하여 사용자에게 제공함으로써 사용자의 직관적인 이해도를 높일 수 있을 것으로 기대되며, 장대교량, 터널, 댐, 건물 등 대형시설물의 거동을 효과적으로 감시하고 그 결과를 전송할 수 있어 광범위하게 사용이 될 수 있을 것으로 판단된다.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.8 no.3
• /
• pp.77-86
• /
• 2004

The retrofit priority of existing and retrofitted bridges is examined and compared to determine effectively the seismic retrofit method of bridges. For the retrofit prioritization of bridges a quantitative procedure is proposed firstly based on seismic damage probabilities and total failure cost due to the damage of seismic vulnerable components. Using the proposed procedure, the retrofit priority of four typical girder-type bridges is determined. In addition, the ranking indices of bridges retrofitted by steel jackets and cable restrainers are revaluated for comparing with the results of existing bridges. Application of retrofitting method can considerably decreases damage possibilities of retrofitted components but may increases those of adjacent vulnerable components. Therefore, the seismic retrofitting effects based on the global motions of existing and retrofitted bridges should be examined to determine efficiently the retrofitting method. For evaluating the retrofitting effects the ranking indices obtained from the proposed procedure is found to be utilized effectively.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.10 no.6
• /
• pp.17-25
• /
• 2010

This paper studied on stability of the U-channel segmental concrete bridge under vehicle-impact loads. The U-channel bridge has advantages in that it reduces an additional dead load and the edge beams role as a barrier. But it has a dangerous factor which collapses the bridge structure when the edge beams are ruptured. Therefore, it is necessary to verify behaviors of the bridge system under vehicle-impact loads. Static and dynamic vehicle impact simulations were carried out on the basis of AASHTO LRFD design specifications. In case of the static analysis, equivalent static loads specified in the AASHTO codes are loaded on the edge beams and in case of the dynamic analysis, FEM vehicle models are modeled by applying the dynamic test specifications of AASHTO codes. As a result, it is shown that U-channel bridge system has sufficient safety against static and dynamic impact loads specified in the AASHTO LRFD design specifications.

• Journal of Korean Society of Steel Construction
• /
• v.21 no.1
• /
• pp.1-14
• /
• 2009

Estimating appropriate construction cost at the design phase is judged with one important issue to the efficient security and the execution of budget. Therefore, in this paper, to build fundamental data of appropriate construction cost for steel box bridges, the existing calculated document such as the quantity, unit price document and detail items etc.. was analyzed and the basic specification of the bridges was investigated. Also, by estimating the relationship between predetermined cost and construction items on the bridges, the paper is intended to produce basic data for the calculation of appropriate construction cost in planning phase. From the result, it was calculated ratio of construction item in the total construction cost and unit cost. And then it was deduced effect factor of construction cost in steel box bridge.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.2
• /
• pp.1469-1476
• /
• 2015

The bridges take a significant part of entire route in Korea railway, because 70% of Korean territory is covered with mountains. For this reason, span enlargement of railway bridges is more advantageous to increase economic efficiency on the bridge design. However there are many limitations such as additional axial force of the rail, excessive displacement due to track-bridge interaction. In this study, track-bridge interaction analysis was conducted considering the sliding layer which was installed between the track and girder. From the numerical analysis results, the behavior of track-bridge interaction was investigated according to the installation method of sliding layer. Finally, a guideline for development of track-bridge structure system to reduce the track-bridge interaction was proposed.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.35 no.3
• /
• pp.149-158
• /
• 2022

As a bridge ages, its mechanical properties and structural performance deteriorate, degrading its seismic performance during a strong earthquake. In this study, the aging of piers and bridge bearings was quantified in several stages and reflected in the analysis model, enabling the evaluation of the member-level seismic fragility of these bearings. Moreover, by assuming that the failure mechanism of a bridge system is a series system, a method for evaluating the system-level seismic fragility based on the member-level seismic fragility analysis result is formulated and proposed. For piers with rubber and lead-rubber bearings (members vulnerable to aging effects), five quantitative degrees of aging (0, 5, 10, 25, and 40%) are assumed to evaluate the member-level seismic fragility. Then, based on the result, the system-level seismic fragility evaluation was implemented. The pier rather than the bridge bearing is observed to have a dominant effect on the system-level seismic fragility. This means that the seismic fragility of more vulnerable structural members has a dominant influence on the seismic fragility of the entire bridge system.

• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.165-165
• /
• 2011

내진 설계규정이 적용되기 이전에 시공되어 사용 중인 교량의 경우 지진 발생시 교각의 파괴 또는 구조적 피해는 교량 전체 시스템의 붕괴를 초래하므로 지진하중에 대하여 피해를 최소화해야 한다. 이를 위해 내진설계규정이 적용되기 이전의 교량 또는 지진취약지역으로 분류된 곳의 교량, 사회적 중요도가 높은 교량에 대해 교각의 내진성능보강을 실시하고 있다. 2007년 말 국토해양부가 관리하고 있는 11,940개 교량 중 지진 발생시 피해가 우려되는 1,342개(일반국도 682개, 고속국도 600개) 교량에 대해 2006년부터 내진보강이 착수되었고 2009년에는 확대 추진하여 일반국도 80개교, 고속국도 100개교에 대한 보강을 실시하였다. 이와 같이 확대 추진되고 있는 정책에 반해, 내진보강 기술 및 제품이 부족하고 새로운 내진보강재 개발이 불가피해지고 있는 것이 현실이다. 소성영역에서의 횡방향 철근은 지진 시 종방향 철근의 좌굴과 콘크리트의 압축강도저하를 방지하며, 전단보강철근으로도 중요한 역할을 하여 교각의 전단강도를 증가시킨다. 그러나 이러한 횡방향 철근은 초기 설계에 의한 시공이 종료된 후 기존의 성능을 증가시키기 위하여 철근량을 증가하거나 단면의 변화를 주기에는 매우 어려운 일이다. 따라서 내진성능을 위한 단면력 증가를 위하여 다양한 재료의 보강재와 형식이 사용되고 있다. 본 연구에서는 원형교각 모델의 구조해석을 이용해 내진성능평가를 선행한 후 실험체를 제작, Helical Bar를 보강하여 준정적 실험을 통해 내진보강성능을 평가하였다. 압축설계강도 $f_{ck}=240kgf/cm^2$를 기준으로 교량등급 2등교인 일반적인 도로교의 1/4축소모형을 설계, 기초부는 $1,200{\times}600{\times}600$ (mm)으로 철근과 콘크리트로 구성하였으며, 기둥부는 직경 400mm, 높이 1,250mm 크기의 철근콘크리트 원형 교각 실험체를 제작하였다. 제작된 실험체는 총 3개로, 분류는 무보강 일반 실험체, Helical Bar 직경에 따른 분류, 보강간격에 따른 분류로 나누어진다.

• The Journal of the Korea Contents Association
• /
• v.16 no.2
• /
• pp.221-230
• /
• 2016

As structures' long term performances and users' safety have been highlighted, a new maintenance technique using IT has drawn attention around the globe. Therefore, throughout the paper, by analyzing bridge's static and dynamic data using wireless measuring sensor, a "real time smart bridge monitoring system" has developed. Smart bridge monitoring system is consists of three main parts a sensor that can measure major members' movement, a wireless system that informs the data from the sensor, and the database system that analysis the data. In order to test the performance of the system, five different were placed on the Olympic Bridge, Seoul. The power system of the sensors was replaced by self-sustain solar energy system. In order to validate data from the real time smart bridge monitoring system, the data was collected for a week from both wireless system and the wired system and the two data were compared to see the relevance.

• The Journal of the Korea Contents Association
• /
• v.16 no.1
• /
• pp.362-369
• /
• 2016

Recently, Last to check the security status of various medium and large bridge structures using various kinds of measurement equipment, but most of the methods are used to measure and check the displacement behavior of the bridge by a certain period. In this study, receive GPS satellite signals that can be observed in real time the whole region, a bridge to automatically measure the displacement and behavior characteristics of the structure in real-time in mm over the 24 hours, the measurement information and transmits the data to the wireless network, by making use, it was applied to the real-time monitoring system in connection with a bridge to be able to automatically notify GNSS fine displacement behavior. In fact, analysis and receives the measurement data to GNSS provided in the upper bridge of the middle and large-sized aging for this purpose, measuring USN and at the same time is converted into a three-dimensional position information of a test study was conducted to monitor the bridge displacement in real time. As a result, a vertical displacement of about 0.027~0.037m at the measurement time of day of the measurement point is that the repeated and confirmed.