• Information Systems Review
• /
• v.9 no.3
• /
• pp.99-132
• /
• 2007

As customer management rises by important issue in electronic commerce, virtue study about CRM have proceeded much. However, because existent researches were positive researches of most statistical base, There are some limitation that does not show dynamic change with CRM flow by flowing of time, and can not forecast propriety and future result about CRM strategy. Therefore, in order to overcome existent limitation on these CRM study, this study designed dynamic model which draws factors that compose CRM strategy of on-line shopping mall, and do based on technique in system dynamics so that can analyze dynamic change between these factors. Concretely, atomized customer focuses in the on-line shopping mall and does based on Permission marketing theory, and applied CRM of different level to atomized customers and know change of customer satisfaction measurement and discomfort degree accordingly. According to the result of Simulation practice, situation that achieve CRM strategy of different level by atomize customer more increase the customer satisfaction than situation that is not so. Dynamic pattern that presented in this study is expected that can verify validity about CRM achievement strategy of different level at each CRM point of contact & how Internet enterprise including on-line shopping mall is establishing CRM strategy reasonably.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1992.10a
• /
• pp.25-30
• /
• 1992

최근 전자계산기를 이용한 진동해석 방법이 눈부시게 발달하여, 일반 구조물 이나 기계 구조물 등의 동특성을 설계 단계에서 정도 높게 예측하는 것이 가능하게 되었다. 그러나 종래의 구조해석은 주어진 시스템의 동특성을 위한 것으로 얻어진 동특성으로부터 질량, 관성제원 및 스프링상수값 등의 설계상 수값을 규명하는 연구는 미미한 실정이다. 이것에 대한 해결방법으로 크게 해석적인 방법과 실험적인 방법으로의 접근이 있어 왔다. 해석적인 방법으로 유한요소해석에서 얻은 모드좌표를 물리좌표로 변환하는 방법으로 Guyan의 정축소와 같은 절점축소를 행하는 방법이 고찰되었다. 실험적인 방법으로 가 진실험에서 얻은 전달함수나 모드파라미터로부터 [M], [K] 행렬을 결정하는 연구가 있었지만 어떤것도 질량, 스프링상수 등의 설계상수를 완전히 규명하 지는 못하였다. 또한, 설계 단계에서 필요한 질량, 관성제원 또는 스프링상수 등의 최적한 값이나, 원하는 시스템특성을 얻을 수 있는 설계상수의 적정한 폭을 구하는 연구는 설계자의 경험과 반복된 시행착오에 의존하는 실정이다. 감도해석은 이러한 문제점을 개선하는 수단으로 설계변수에 대한 동특성의 변화율을 구하는 것이다. 감도해석을 수행하는 것은 어느 설계변수를 수정하 는 것이 주어진 동특성에 부합되는 지를 알려주고, 어느 것을 수정하는 것이 원하는 방향의 동특성변화에 가장 효과적인지를 알려주는 것이다. 따라서 감 도해석을 이용하여 설계의 최적화 프로그램을 만들수 있고, 이것은 설계자가 요구하는 동특성을 목적함수로 하여 주어진 구조물을 최적화하는 설계상수 값을 얻을 수 있게 한다. 본 논문에서는 강체모델의 동특성으로부터 모델의 설계 상수를 규명하고, 동특성의 개선을 위하여 설계변수의 변경량을 물리좌 표계에서 얻는것을 목적으로 한다. 강체 마운트계의 관성제원 및 마운트강성 의 규명을 위하여 임으로 주어진 설계상수를 모델데이타로 하여 관성제원과 스프링 강성을 구하였다. 관성제원의 규명은 주어진 모델의 관성값을 모르는 것으로 하여 임의의 초기 관성값으로 감도해석에 의해 주어진 계의 관성값 을 물리 좌표계에서 규명하였다. 마운트 강성의 규명도 관성제원의 규명과 같은 방법으로 임의의 강성값으로 감도해석을 하여 강성값을 규명하였다. 또 한 감도해석에 의한 동특성 변경은 특정한 고유진동 수의 변경이 필요할 때, 고유진동수의 이동을 위한 관성제원의 변경 및 마운트 강성변경값을 예측할 수 있다. 본 연구수행의 기본적인 흐름도는 Fig.1.1과 같다. 위와 같은 작업 으로 엔진 마운트와 같은 강체 모델의 시스템 규명을 행하는 경우에 유한요 소해석 및 가진 실험으로 얻은 고유진동수의 정보 또는 원하는 고유진동수 의 특성을 기본으로 실제 설계에서 사용이 가능하도록 물리 좌표계에서 관 성 제원 및 스프링상수를 구할 수 있을 것이다.

• Cartoon and Animation Studies
• /
• s.49
• /
• pp.589-610
• /
• 2017

This study aimed at examining the music world of the composer Muczynski, who played an important and meaningful role in the various experimental trends of music which began to appear in the early $20^{th}$ century, and his works, thereby understanding his relationship with the development of music of various genres today. In the study, his pieces of piano music among his works, which formed the basis for his music, were analyzed. The study examined stylistic characteristics, that is techniques of various types including form, melody, harmony, tonality, rhythm and structure, and introduced the composer's growth in terms of music and philosophical background. Muczynski, the composer who showed the characteristics of neoclassicism, neoromanticism and neobaroque in contrast to the various forms of the $20^{th}$ music, namely music of free styles including atonal music, twelve-tone technique, avant-garde music and electronic music, used traditional forms. However, the characteristics of his works are very free. In addition, in the 1960s, he participated in the production of documentary movie music, creating very creative and sensational music. Muczynski's music has the features of tonality and shows neoclassic and neoromantic features including economical idea, lyrical melody, bitonality and nine-note scale. His music, therefore, is being evaluated as very creative and valuable and is largely significant in that it has provided a good basis for the development of modern movie music and jazz music today.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.24 no.5
• /
• pp.433-441
• /
• 2006

With a development of electrical technology in recent, it is possible to measure distance without direct contact to object using laser which launched at instrument and reflect from object. Furthermore, the advent of non prism total station brought the increment of application in many fields including not only road, airport, and harbors but also measurement and monitoring of structural displacement in construction fields. In this study, therefore, to evaluate accuracy of non prism total station, accuracy was analyzed by measuring certain distance which classified by both certain materials and angle of reflection. By this method, the derived values were applied to topographical survey for the efficient applicability. According to a study, result value of non prism total station was satisfBctory regardless of material when the angle of reflection was 90 degrees. RMSE increased when the angle of reflection are gradually increased to acute angle. In result of regression analysis using certain distance which classified by both materials and angles of reflection, there is relationship between distance and angle of reflection, but material has no relevance to the result value. When carrying out general topographical survey, proper application of non prism total station will go far conducting safe and prompt survey at the dangerous site such a road which have lots of traffic flow and rock joint which have high angles of inclination.

• Archives of design research
• /
• v.14 no.3
• /
• pp.7-14
• /
• 2001

Modern graphic design is creating a new area of graphic design due to the development of computer technology as it changes the existing world of graphic design with a variety of advanced style of image. It is true, however, that the basic principles and images in the modern design are influenced by the visual principles and methods elaborated and changed by the numerous creative works that is well representing the visual features of graphic design trends from the early 20th century to the mid century. The style of graphic design at the time which is generally referred to as 'modern graphic design' went through Pictorial modernism, Constructivism, De Stijl, Bauhaus after the beginning of 20C design, Art Noueau. It spread over the world in the ear of Swiss graphic design and New York graphic design that create the basic principles and styles in modern graphic design. This study examines visual features and flow of graphic design from the early years in the 20th century to the middle of the century, the foundation ear of principles in the modern graphic design. It will give a systematic and fundamental understanding of graphic design and visual features of it while it will be in a research process to create a new graphic style.

• Journal of the Korean Electrochemical Society
• /
• v.23 no.3
• /
• pp.66-72
• /
• 2020

In this study, the development of biosensors capable of bi-enzyme reactions by including Horseradish peroxidase and glucose oxidase was carried out for detection of glucose. The sensors were manufactured using electro deposition method to reduce production time, and screen printed electrodes (SPE) were used to produce economical sensors. To check the bienzyme effect, the sensor was compared and analyzed with single enzyme biosensor. The characteristics of the sensor were evaluated using scanning electron microscopy(SEM), cyclic voltammetry(CV), electrochemical impedance spectroscopy(EIS), chronoamperometry(CA), and flow injection analysis(FIA). Analysis results from SEM, CV and EIS confirmed that the enzymes are well fixed to the electrode surface. In addition, it was confirmed that bi-enzyme biosensors manufactured from the CA method improved signal performance by 200% compared to single enzyme biosensors. From this results, we were able to explain that HRP and GOD react catalyzed to each other. And the results of FIA showed that the intensity of each current signal was constant when the same concentration of glucose was injected four times. In addition, by analyzing the intensity of current signals for glucose concentrations, the biosensors manufactured in this study showed excellent trends in signal sensitivity, reproducibility and stability.

• Journal of Korean Society of Archives and Records Management
• /
• v.18 no.1
• /
• pp.129-154
• /
• 2018

It is time to prepare for the imminent development from the field of records management through decentralization to the records management of the new age in accordance with the flow of decentralization. To overcome a centralized record management system, more archives should be established to realize autonomous and decentralized records management. In accordance with the shift to a full-scale electronic record management environment, the appropriateness and effectiveness of the three-phase system of processing-archival-permanent record management based on physical transfer should be reviewed in terms of transfer cost and work efficiency. The archives should function as institutional archives to carry out the continuous volume record management and the autonomous record management at the institution level. This study examined the possibilities and implications of the archives to expand their functions as archives of institutions for the decentralization of record management and information governance orientation. In addition, the study diversified the types of records management institutions as a way to accomplish this and determined a way to design the functions of archives that integrate the current-end-end-end records management. At each level, institutions should set up archives based on their circumstances and aim at information governance at the level of each archive. Moreover, each archive level should establish a horizontal network to govern record information management.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.52-52
• /
• 2012

최근 선진국을 중심으로 제조기술의 산업혁명이라고 불릴 정도로 큰 파급효과가 기대되는 자기조립기반의 산업공정기술을 확보하기 위한 많은 노력과 연구들이 활발하게 진행되고 있다. 자기조립(Self-Assembly) 현상은 자연에서 일어나는 자발적인 힘으로 원자 또는 분자 단위까지 구조물을 제어하고 bottom-up 방식(상향식: 원자/분자 스케일의 나노구조를 배열/조립하여 원하는 형태의 패턴을 만들어 내는 방식)으로 원하는 구조물을 설계/제작할 수 있는 능력을 가지고 있다. 기초적인 과학으로부터 출발한 자기조립기술은 최근 자기조립 응용개발에서 많은 성과를 이루어내면서 산업화 가능성을 크게 하고, 과학계와 산업계의 많은 관심을 불러일으키고 있다. 반도체 산업기술을 예측하는 ITRS 로드맵(2005년)에 의하면 directed self-assembly 방법이 새로운 미래 패터닝 기술로 개발되어 2016년경에 사용되고, 자기조립소재로 제작된 다양한 응용소자들은 새로운 미래소자로 개발될 것으로 예상하고 있다. 이에 맞추어 국내 기업들도 diblock copolymer를 이용한 나노패터닝 기술 확보를 위한 연구를 진행하고 있다. 또한 IBM은 자기조립기술을 반도체공정에 실험적으로 적용하여 자기조립기술이 생산 공정에 부분적으로 적용될 가능성이 크다는 것을 보여주었다. 산업계와 함께 학계의 연구센터에서는 산업화를 위한 자기조립 집적화 공정(Integrated process) 개발을 이루기 위하여 체계적으로 연구를 실시하고 있다. 미국의 Northeastern 대학의 CHN(Center for high-rate Nanomanufacturing) 연구센터는 자기조립 집적화에 용이한 새로운 개념의 소자를 제안하고 이를 집적화하기 위한 다양한 공정을 개발하고 있으며, Wisconsin 대학의 NSEC(Nanosacle Science and Engineering Center) 연구센터는 diblock copolymer를 이용한 나노패터닝 기술 개발에서 획기적인 결과를 도출하여 산업계에 적용될 가능성을 높이고 있다. 이와 같은 결과들로부터 앞으로의 자기조립기술에 대한 연구는 3차원 구조물을 제작할 수 있는 집적화 공정에 집중될 것이고, 이를 위하여 새로운 개념의 단순한 구조의 응용소자개발도 함께 추진될 것으로 판단된다. 또한 실용 가능성이 큰 집적화 공정으로 개발하기 위하여 기존의 top-down 방식을 접목한 bottom-up 방식의 자기조립 집적화 공정이 개발될 것으로 예상하고 있다. 이와 함께 자기조립공정은 반복되는 구조를 쉽게 제작할 수 있는 장점을 가지고 있어 다양한 응용소자 [태양전지(solar cell), 연료전지(fuel cell), 유연성 있는 전자기기(flexible electronics), 화면표시 장치(display device)] 제작에 쉽게 이용되어 새로운 산업을 창출할 수 있는 가능성을 보이고 있다. 본 자기조립 연구 센터에서는 이와 같은 자기조립 특성을 제조공정에 적용하여 혁신적인 제조공정기술을 확보하고자 연구를 진행하고 있다. 그러므로 본 발표에서 이와 같은 연구 흐름과 함께 본 센터에서 진행하고 있는 자기조립 제조방법을 소개하고자 한다. 이와 함께 자기조립방법을 이용하여 제작된 다양한 응용소자 개발 결과를 발표하고, 이를 top-down 방식과 접목하여 집적화공정으로 개발하는 전략을 함께 소개하고자 한다.

• Journal of Navigation and Port Research
• /
• v.33 no.5
• /
• pp.315-321
• /
• 2009

The Very Large Marine Structure has been widely used new method of ocean space instead of method for reclamation Therefore, VLFS is proposed to coincide on such request. It can be established regardless of nature of soil and height of water, and stream of flow exists under the floating structure, there is seldom effect in natural environment. Fuertherrnore, it can do easily to do assembly and taking to pieces due to expansion or removal. Based on the regulation by class, VLFS have to possess more than enough structural strength against severe wave loading induced by green sea condition Therefore, There are performed structural simulation as well as experimental test about expected loading scenario in order to examine the safety of structure. Up to now, various examinations based on the strength limit value of the main structural material have been done based on the elasticity response analysis. However, there is little finding about the collapse behavior and the safety when the load that exceeds the collapse of the material acts. In the present study, we investigated the collapse behavior based on the ultimate limit state calculated by FE-analysis.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.3
• /
• pp.754-766
• /
• 1997

In this paper,we implement the Audit Trail Service Sydtem for the EDI Security.It has solved a law dispute between enterprises by informations that have generated by the EDI serice systrm.The audit trail service sys-tem implemented for EDI security satisfied the requirements of audit and the protocol of the security serive of X.435 and X.400.The EDI Security Audit System consists of the event discrimiator,the audit recirder,the audit archiver,and the provider of audit services .The event discriminator classified the reansmitted data from the EDI network ot audit sercices.The audit recorder constructs an index that has combined time information wiht audit unformations which are classified by the event discriminator.ZThe audit archiver performas the vacumming of added audit imformations by passing time by passing time.The audit provider is a module that carries out the audit trail servies by using stored audit informations. The audit provider suports audit servies,which are non-requdiation,proof and probe,controller of security,and accesing infrimation.The audit trail service system for EDI security constructs audit information by using index that is combining time imfromation,so it supports especially fast accesing audit information.