• Resources Recycling
• /
• v.23 no.4
• /
• pp.58-68
• /
• 2014

The statistics showed that about 1 billion automobiles were registered and about 40million ELVs occurred on the world in 2010. So all advanced countries including EU had plan to increase the ELVs recycling rate up to 95% of total by 2015. The Korean government also established a target for raising up to 95% of ELVs recycling rate according to 'Act on the Resource Circulation of Electrical and Electronic Equipment and Vehicles'. Before being satisfied with the requirement of recycling of ELVs however, the problem is issued on the scraps of plastic and non-ferrous metals which are now being abandoned and reclaimed with no adequate reuse. Therefore, as a part of preceding investigation on the present state of ELVs recycling in the world, this preliminary investigation study was carried out focusing on the state of EU's disposal and management regulations of ELVs and SLF/ASR including the world trend of disposal and management regulations of ELVs and SLF/ASR.

• Nuclear Engineering and Technology
• /
• v.21 no.1
• /
• pp.40-47
• /
• 1989

For the effective design of a beam forming structure of the negative-ion-based neutral beam injector, a computer program based on a particle simulation model is developed for the calculation of charged particle motions in the electrostatic fields. The motions of negative ions inside the acceleration tube of a multiple-aperture triode are computed at finite time steps. The electrostatic potentials are obtained from the Poisson's equation by the finite difference method. The successive overrelaxation method is used to solve the matrix equation. The particle and force weighting methods are used on a cloud-in-cell model. The optimum design of the beam forming structure has been studied by using this computer code for the various conditions of elctrodes. The effects of the acceleration-deceleration gap distance, the thickness of the deceleration electrode and the shape of the acceleration electrode on beam trajectories are exmined to find the minimum beam divergence. Some numerical illustrations are presented for the particle movements at finite time steps in the beam forming tubes. It is found in this particle simulation modelling that the shape of the acceleration electrode is the most significant factor of beam divergence.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.285-285
• /
• 2018

하천에서 부유사의 형태로 이송되는 점착성 유사는 입자 표면의 전자기적 점착력의 영향과 하천의 흐름 및 난류에 의하여 지속적인 응집과 파괴의 과정인 응집현상을 겪는다. 이러한 응집현상을 통해 플럭을 형성한 점착성 유사의 크기 및 밀도는 끊임없이 변화하며 침강속도 역시 변화한다. 점착성 유사의 이동을 예측하기 위해서는 유사의 부유에 직접적으로 관계하는 침강속도를 이해하는 것이 중요하며 많은 연구에서 점착성 유사의 농도와 침강속도의 관계를 그래프로 보여주고 있다. 일반적으로 그래프에서 침강속도는 처음에 농도가 증가할수록 증가하는 비례 관계를 보여주다가 농도가 어느 정도를 넘어 더 증가하게 되면 감소하여 반비례하는 모양을 그리고 있다. 또한 연구들은 농도와 침강속도 두 관계가 분명한 멱함수법칙(Power Law)을 가진다고 언급하고 있다. 그러나 이전의 연구에서는 그래프가 보여주는 두 관계의 분석이나 메커니즘에 대해 중점을 두고 논의된 바가 없다. 본 연구는 점착성 유사의 응집현상과 이동을 모의하는 1차원 연직 수치모형으로 수치 실험을 실시하고, 그 결과를 바탕으로 농도와 침강속도가 갖는 관계를 면밀히 분석한다. 플럭의 크기 및 농도는 유사의 부유를 결정하는 침강속도와 매우 밀접한 관련이 있는 특징이며 특히 플럭의 크기는 침강속도를 결정한다. 즉 플럭의 크기와 농도가 갖는 관계가 침강속도와 농도가 갖는 관계에 크게 관여할 것으로 예측된다. 앞서 언급한 연구들의 그래프에서 비례 관계를 갖는 구간은 일반적으로 수면과 가까우며 농도와 크기가 비례하는 경향을 보이며 반비례하는 구간은 농도가 크고 난류가 강한 하상부근으로 두 관계가 반비례하는 경향이 밝혀진 연구가 있다. 점착성 유사의 농도 및 플럭의 크기가 이러한 경향을 띠는 것은 하상부근에서는 난류 전단과 그에 따른 플럭의 파괴와 응집의 결과로 나타나는 응집현상과 관련이 있으며 이러한 결과들을 바탕으로 점착성 유사의 침강속도와 농도가 가지는 관계를 분석한다.

• The Korean Journal of Archival Studies
• /
• no.24
• /
• pp.41-71
• /
• 2010

Reappraisal is a process to examine the past appraisal decision. The reappraisal theory is based on two facts: first, appraisal decision can not be always correct, second, the archival value is changed by time. So, reappraisal policy should complement the limit of the first appraisal results, which is based on the function analysis. To achieve this goal, it is needed to use different process and methods from the first appraisal. However, existing reappraisal system does not meet the essential purpose of reappraisal. This article examined the limit of the reappraisal policy. To complement the problems, this article set a direction and suggested the subject-based reappraisal. The aim of this study is to present the methods to document the society of the generation.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.1
• /
• pp.57-65
• /
• 2019

Computer aided design and manufacturing and implant surgery using a guide template improve restoration-driven implant treatment procedures. This case utilized those digital technologies to make definitive prostheses for a patient. According to the work flow of digital dentistry, cone beam computed tomography established the treatment plan, which was followed to make the guide template for implant placement. The template guided the implants to be installed as planned. The customized abutments and surveyed fixed restorations were digitally designed and made. The metal framework of the removable partial denture was cast from resin pattern using an additive manufacturing technique, and the artificial resin teeth were replaced with the zirconia onlays for occlusal stability. These full mouth rehabilitation procedures provided functionally and aesthetically satisfactory results for the patient.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.2
• /
• pp.137-142
• /
• 2021

A Photovoltaic power streetlight is a system that uses solar energy to charge a secondary battery and then uses it for night lighting through a lamp, and can be configured as a standalone or grid-connected type by installing an LED streetlight at the load end. The energy generated through the solar cell module can be charged to the secondary battery through the charge/discharge control device, and then the LED street light can be turned on and off by comparing the power generation voltage and the charging voltage according to the monitoring of solar radiation, or by setting a specific time after sunset or sunrise. Based on these contents, this paper designed and manufactured a simulated solar power streetlight for education using new and renewable energy utilization and storage functions. Using these educational equipment, students can 1) understand the flow of energy change using renewable energy including sunlight as electric energy, 2) understand new and renewable energy, and cultivate basic design and manufacturing application power of related products, 3) The use of new and renewable energy through power conversion and strengthening of practical training and analysis through hardware production can be instilled.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.6
• /
• pp.534-541
• /
• 2021

This study aims to establish an efficient future technology development strategy in the information and telecommunications industry by grasping related technology trends and fusion complexity through an analysis based on standard patents. Analyzing 1,983 patents related to the information and telecommunications industry identified the trends in major patent applicants and detailed technologies in the world. In addition, technology trends were investigated through keyword analysis to examine the degree of complexity in information and communications technology, confirming the direction of research in information technology. Electronic component and wireless communications fields have relatively few standard patents, but they are highly convergent with other industrial technologies. Computer information processes and communication and broadcasting technologies are highly related to each other, so they can be used as standard fusion technologies in standard patents. In addition, standardization activities in optical and image/sound devices are found to be high.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.10
• /
• pp.1188-1194
• /
• 2019

Among the many ways to measure the flow of fluid the hot air wind speed sensor is a device for measuring the speed or temperature by heat transfer of a fluid. However, the hot wire wind speed sensor is sensitive to external environmental factors, and has a disadvantage of inaccuracy due to ambient temperature, humidity, and signal noise. In order to compensate for this disadvantage, advanced technology has been introduced by adding temperature compensation circuits, but it is expensive. In order to solve this problem, this paper studies the wind speed sensor that does not need temperature compensation. Heated wind speed sensors are very vulnerable to the ambient temperature, which is generated by electronic circuits, even among external environmental factors. in order to improve this, the auxiliary heating element is additionally installed in the heating element to control a constant temperature difference between the auxiliary heating element and the heating element.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.25 no.3
• /
• pp.127-137
• /
• 2021

The launch complex(LC) is composed of various facilities. The launch control system that operates remotely those of LC spends much time and labor for developing and verifying its control algorithms. The verification of algorithms is performed by the software developer entering simulated state values based on the test procedure and checking the output result according to the algorithm flow. These verification processes should be performed repeatedly, thus the human errors are easily occurred. In this paper, an efficient automated verification method with a script test procedure is proposed to minimize human errors and shorten the verification duration. We also present the results of the algorithm verification tests for the cases of the compressed gases supply system and the electro pneumatic panel system of LC.

• Journal of Intelligence and Information Systems
• /
• v.28 no.2
• /
• pp.1-18
• /
• 2022

As digital technology converges into the e-commerce market across industries, online transactions have activated, and the use of online has increased. With the recent spread of infectious diseases such as COVID-19, this market flow is accelerating, and various product information can be provided to customers online. Providing a variety of information provides customers with various opportunities but causes difficulties in decision-making. The recommendation system can help customers to make a decision more effectively. However, the previous research on recommendation systems is limited to only quantitative data and does not reflect detailed factors of products and customers. In this study, we propose an intelligent recommendation system that quantifies the attributes of products and customers by applying text mining techniques to qualitative data based on online reviews and integrates the existing objective indicators of total star rating, sentiment, and emotion. The proposed integrated recommendation model showed superior performance to the overall rating-oriented recommendation model. It expects the new business value to be created through the recommendation result reflecting detailed factors of products and customers.