• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2000.11a
• /
• pp.179-183
• /
• 2000

인터넷의 확산으로 일반인들이 높은 정보수집력을 보유하게 됨에 따라 소비자 중심의 시장이 형성되면서 전자상거래를 통한 소비자간의 거래가 점점 늘어가고 있다. 그에 따라 많은 연구자들이 소비자간 전자상거래를 지원하기 위한 지능형 에이젼트를 개발하고 있다. 그러나 기존의 소비자간 전자상거래 에이젼트 시스템은 경매나 역경매와 같은 '1:다'의 경쟁적 협상을 지원하거나, 판매자와 구매자의 거래성사를 위한 시간흐름에 따른 가격조건 완화를 이용한 자동협상에 주로 촛점을 맞추고 있다. 본 연구는 기존의 자동협상에 관한 연구와는 다른 관점에서, 소비자들간에 거래하려는 제품에 대해 제품사양 및 거래조건의 변화가 가능한 경우에 판매자와 구매자가 느끼는 개인적인 효용의 차이를 이용하여 판매자와 구매자가 모두 만족하는 제품사양, 거래조건, 가격의 거래결과를 찾아주기 위한 자동협상구조를 제시한다.

• Annual Conference of KIPS
• /
• 2004.05a
• /
• pp.1335-1338
• /
• 2004

1990 년대 이후 초고속인터넷 확산으로 인해 전자 상거래 서비스가 급속히 확산되고 있다. SLA란 서비스 제공자와 고객간의 협약으로 서비스 제공자가 서비스 품질을 보증하기 위한 제도이다. 전자 상거래 시스템은 비즈니스 트랜잭션이 처리되어야 하므로 QoS 보장은 매우 중요함에도 불구하고, 전자 상거래를 위한 SLA에 대한 연구는 아직 미진한 상태이다. 본 논문에서는 전자 상거래 서비스의 QoS 측정 지표를 정의한 후 자동화된 처리가 가능한 SLA 관리 프레임워크를 설계하고 서버 환경 장애 발생 시 장애 복구에 대한 처리 흐름을 제안한다.

• Annual Conference of KIPS
• /
• 2020.05a
• /
• pp.318-319
• /
• 2020

본 논문은 ICT 융합 기술 분야의 기초가 되는 전자회로의 이론 및 실습을 위한 방법으로 증강현실기반 전자 회로 교육 시스템을 제안 하였다. 제안된 시스템은 기본 전자 소자가 탑재된 하드웨어 모듈과 증강현실 기술을 적용한 모바일 교육 콘텐츠로 실제 회로를 실물로 동작 확인이 가능하며, 증강현실 기반에서 전류의 흐름, 입·출력값 측정값등에 대한 정보를 제공한다. 이에 각 이론 및 실습단계에서 기초 전자 소자 및 전자 회로에 대한 교육을 자기 주도 학습이 가능하도록 하였다.

• The Journal of Society for e-Business Studies
• /
• v.17 no.1
• /
• pp.91-110
• /
• 2012

Recently the effort of retailers improving the efficiency of store operations by using the information technology (IT) is increasing. Among them, the analysis of the shoppers' flow in retail stores is one of the critical tasks since it is an essential part in optimizing store layout and item grouping, and in developing the customized services specialized to shoppers' classification. Agent-Based Modeling and Simulation (ABMS) is one of the most promising methods which support analyzing the shoppers' flow. In this paper, we suggested a shopper's behavior model and developed an agent-based simulator for optimizing the operations of retail stores. In order to model the shoppers' behavior, we analyzed the behavioral characteristics of shoppers based on their shopping lists, suggesting BDI-based agent models of the shoppers' behavior. The shopping agent model were suggested, which has an additional mental state, the shopper's behavioral characteristic, as well as the original mental states of the BDI theory which has beliefs, desires and Intentions. The result of this study can be used in as a preliminary study for modeling and simulation of retail stores congestion and in the end the optimization of item grouping and store layout.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.12
• /
• pp.91-102
• /
• 2005

Recently, concurrent error detection for the processor becomes important. But it imposes too much overhead to adopt concurrent error detection capability on the system. In this paper, a new approach to resolve the problems of concurrent error detection is proposed. A loop detection scheme is introduced to reduce the repetitive loop iteration and memory access. To reduce the memory overheat an offset to calculate the target address of branching node is proposed. Performance evaluation shows that the new architecture has lower memory overhead and frequency of memory access than previous works. In addition, the new architecture provides the same error coverage and requires nearly constant memory size regardless of the size of the application program. Consequently, the proposed architecture can be used as an cost effective method to detect control flow errors in the commercial on the shelf products.

• Journal of the Microelectronics and Packaging Society
• /
• v.7 no.2
• /
• pp.21-27
• /
• 2000

To develop the underfill materials which are required for the new process of semi-conductor industry, the properties of epoxy/anhydride/cobalt(II) catalyst system with two types of fused silica(1 $\mu\textrm{m}$, 8 $\mu\textrm{m}$) are studied as a function of filler fraction. According to the curing profile, the optimum catalyst amount was 1.0 wt% for full curing at the conditions of $160^{\circ}C$/l5 min., and we could conclude that the viscosity has superior effect on the real flaw through the relationship between surface tension and viscosity data. The underfills which were filled with 1 $\mu\textrm{m}$ fused silica did not show good flowability, but they should be useful by improving the viscosity for a future process which has small gaps. The underfills which were filled with 8 $\mu\textrm{m}$ fused silica showed good flowability when the filler contents were 55~60 vol%. The model which was referred by Matthew can predict the real flow length only when the underfill has high viscosity and low surface tension.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.47 no.4
• /
• pp.63-70
• /
• 2010

In IEEE 802.11e system providing differentiated services, there exist some problems as follows; collision probability increase due to the increase in the number of nodes by employing CSMA/CA transmission mode, transmission speed declining tendency towards the worst of it, which is caused by different transmission mode and decrease of TCP transmission rate as the result of the link occupancy by UDP when TCP shares the link with UDP by the TCP’s flow control characteristic. In this thesis, the initial minimum and maximum CW are set differently according to the number of connected nodes in the network to avoid collisions and TXOP is adjusted according to the channel state, in which ACs with low priority but better channel state will get gradually more chances to transmit leading to optimal channel capacity. Also, by allowing higher priority for ACK frames which control the TCP transmission, the flow control becomes better because that reduces the channel occupancy by UDP flow, and by this, fair transmission is obtained from the result of the more fair transmission and active resource allocation.

• Journal of IKEEE
• /
• v.17 no.4
• /
• pp.525-530
• /
• 2013

The BPEL is standard of workflow. A domain experts not familiar with programming languages and he can write workflow. But he need new function without BPEL. We must develop or modify a BPEL engine for new functions. This method is expensive. In this paper, We propose the XAS4B documents that extend the XML schema. And We describe method that can process new function in BPEL using Aspect-Oriented Programming. AOP can cross-cut concern adding to core concern using weaving without modification. We use an existing B2J (BPEL to JAVA) engine that is transfer a BPEL's document to a JAVA program and B2J execute a JAVA program. This system adding new functions to BPEL's flow using AOP. In this system, A JAVA program is core concern and a program of new function is cross-cut concern. And this system weave a JAVA program made in B2J and a program of new function. This method provide abstract grammar for new functions. And domain experts can easily write new function is a BPEL Document and reuse new function using abstract grammar.

• Journal of the Korean Society of Radiology
• /
• v.6 no.1
• /
• pp.47-51
• /
• 2012

PET/CT is taken 1 hour after $^{18}F$-FDG(F-18-fluoro-2-deoxy-D-glucose) injection. However, these would be often delayed for more than 2 or 3 hours due to equipment fault or unexpected situation. In the study, SUV(standardized uptake value) were measured from got image over time according to the parts of the body. As a result, there were great and small decrease in liver(middle of the right hepatic lobe), fat(Lt pelvis), lung (Rt upper lobe), aorta(ascending aorta level) of the body in delayed image, and ${\Delta}$SUVmax was increase of 37% in bone only(L5 vertebral body) of the body. ${\Delta}$SUVmax was increase of 37.6% in lesion, and the contrast degree was greater because of uptake increase in lesion and uptake decrease in the normal body.

• Journal of the Korean Vacuum Society
• /
• v.7 no.4
• /
• pp.390-396
• /
• 1998

Neutral stream was generated from Helicon plasma source and was applied to etch silicon for the purpose of preventing physical and electrical damages from the bombardment of charged particles with high translation energy. By installing a permanent magnet and applying positive bias beneath the substrate, the cusp-magnetic and electric fiddles were generated in order to remove the charged particles from the downstream plasma. As a result, the electron density and ion density in the vicinity of the substrate were reduced by 1/1000 and 1/10, respectively. The directional etching of silicon was observed and the etch rate was found to be very low to below 100 $\AA$/min at a pressure of $8.5{\times}10^{-4}$ Torr, when $Cl_2$ and 10% $SF_{sigma}$ etchant gases were used.