• Title/Summary/Keyword: 전자 방출

Search Result 949, Processing Time 0.03 seconds

Field Emission characteristics of Multi-layered Diamond-Like carbon films (다층구조 유사다이아몬드 박막의 전계방출 특성연구)

  • 김종탁
    • Journal of the Korean Institute of Electrical and Electronic Material Engineers
    • /
    • v.13 no.5
    • /
    • pp.426-430
    • /
    • 2000
  • We have studied the field emission characteristics of multi-layered diamond-like-carbon (DLC) films deposited by vertical electrodes type plasma enhanced chemical vapor deposition with CH$_4$ and H$_2$ mixture. We deposited a thin layer of DLC on the p$^{+}$-Si substrate and then turned off plasma before another deposition of a new DLC layer. The thickness and the number of DLC layers are varied. The emission characteristics of multi-layered DLC films were compared with conventional one. The multi-layered DLC film shows higher emission current than conventional one.e.

  • PDF

Enhanced characteristics of Molybdenum field emission arrays under laser irradiation

  • 송병권;서도석;남창우;홍진표;김채옥;차승남;이항우;박남신;이내성
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2000.02a
    • /
    • pp.154-154
    • /
    • 2000
  • FED(Field emission display)의 FEAs(Field emitter arrays)에 형성되어 있는 micro-tip 은 tip 표면의 오염이나 진공내부의 잔류가스에 대단히 민감하다. 특히, emitter 물질의 일함수 및 겉모양 같은 기하학적 요소에 민감한 전계방출 소자의 특성상 tip 선단이 oxidation 될 경우 일함수가 증가하여 전자방출에 필요한 구동전압이 증가하고 전자 방출의 불균일성이 커지는 문제점이 발생한다. 이에 고진공의 동작 환경 및 FEAs 제작과정이나 공기의 노출에 발생하는 tip 표면의 오염물질 제거가 요구된다. 따라서 본 연구에서는 40$\times$40mm2 FEAs에 laser power, scan speed을 달리하며 laser(cw Nd-YAG, 1064nm)을 조사하였다. laser cleaning 효과를 보기 위해 laser irradiation 전, 후에 진공도 5$\times$10-7torr irradiation 후에 emitter tip의 뚜렷한 기하학적 모양의 변화를 볼 수는 없었지만, I-V 특성이 향상 되는 것을 볼 수 있었다.

  • PDF

Computer Simulation for Development of Electron Gun for MCP Cleaning (MCP 세척용 전자총 개발을 위한 컴퓨터 시뮬레이션)

  • Kim, Sung Soo
    • The Journal of Korean Institute of Information Technology
    • /
    • v.16 no.11
    • /
    • pp.43-49
    • /
    • 2018
  • Computer simulation was performed using the SIMION program to develop an electron gun for MCP cleaning. The target, MCP, is located 180mm from the source of the electron gun, and the diameter of the MCP is approximately 20mm. Therefore, we tried to find the condition that the beam diameter of electrons reaching the MCP is to be 20mm using four variables such as E, ${\phi}$, d1, d2, where the E is the energy of the electron reaching the MCP, the ${\phi}$ is the diameter of the extractor, and the d1 and the d2 are the distance from the electron source to the end of the extractor tube, and to the wall of chamber, respectively. As a result of simulation, we figuried out that the E and the d2 have little effect on the beam diameter. On the other hand, we also found that the beam diameters were very sensitive to the d1 and varied relatively large with respect to the ${\phi}$, and the d1 was the secondary order function of the ${\phi}$. Therefore we found that this function will allow us to design electron guns that are suitable for the purposes of this study.

The Comparative Study of Software Optimal Release Time Based on Extreme Distribution Property (극값분포 특성에 근거한 소프트웨어 최적 방출시기에 관한 비교)

  • Kim, Hee-Cheul
    • Journal of IKEEE
    • /
    • v.15 no.1
    • /
    • pp.43-48
    • /
    • 2011
  • Decision problem called an optimal release policies, after testing a software system in development phase and transfer it to the user, is studied. The infinite failure non-homogeneous Poisson process models presented and propose an optimal release policies of the life distribution applied extreme distribution which used to find the minimum (or the maximum) of a number of samples of various distributions. In this paper, discuss optimal software release policies which minimize a total average software cost of development and maintenance under the constraint of satisfying a software reliability requirement. In a numerical example, extreme value distribution as another alternative of existing the Poisson execution time model and the log power model can be verified using inter-failure time data.

Thermo-Field emission in silicon nanomembrane ion detector for mass spectrometry (실리콘 나노 박막의 열-전계 방출효과를 이용한 분자 질량분석)

  • Park, Jong-Hoo
    • Journal of the Korean Applied Science and Technology
    • /
    • v.30 no.4
    • /
    • pp.586-591
    • /
    • 2013
  • This paper describes the characteristics of thermo-field emission in a freestanding silicon nanomembrane under ion bombardment with various thermal and field conditions. The thermal effect and field effect in thermo-field emission in silicon nanomembrane are investigated by varying kinetic energy of ions and electric field applied to the silicon nanomembrane surface, respectively. We found that thermo-field emission increases linearly as the electric field increases, when the electric field intensity is lower than the threshold. The thermo-field emission (schottky effect) increases proportionally to the power of temperature, which agree well with the predictions of a thermo-field emission model.