• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.5
• /
• pp.663-671
• /
• 1999

The linearity of the GaAs FET power amplifier(PA) is greatly influenced by source and load impedance for the FETs. The third order intermodulation products, IM3, from the GaAs FET PA are investigated in relation with source and load impedance. From heuristic as well as analytic point of view, e.g., Volterra series analysis, is employed to analyze the effects of nonlinear circuit elements, gate-source capacitance, $C_{gs}$, and drain-source current, $I_{ds}$. The sweet spots where soure and load impedance produce the least intermodulation products are calculated and compared with the load and source pull data with good agreements. It also shows that source impedance has a greater effect on the intermodulation products than the load impedcnce.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.5
• /
• pp.672-679
• /
• 1999

This paper describes the design method of active bandpass filters which employ active impedance inverters. Several authors have reported active bandpass filters. However, the functional description of the active blocks in the filters have not been throughly studied. In this paper, the active inverter block of the bandpass filter has is analyzed in the view point of filter design. The designed 3-pole bandwidth filter has its insertion gain of 24 dB at the center frequency of 865 MHz with 75 MHz bandwidth. The noise figure of the active bandpass filter is less than 2.5 dB within its passband.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.4
• /
• pp.582-591
• /
• 2000

In this paper, the Finite-Difference Time-Domain(FDTD) modeling method of the Korean human head is introduced to calculate electromagnetic energy absorption for the human head by mobile phones. After MRI scanning data is obtained, 2 dimensional(2D) segmentation is done from the 2D MRI image data by the semi-automatic method. Then, 3D dense segmentation data with $1mm\times1mm\times1mm$ is constructed from the 2D segmentation data. Using the 3D segmentation data, coarse FDTD models of human head that is tilted arbitrarily to model the condition of tilted usage of mobile phone.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.2
• /
• pp.186-196
• /
• 2000

In this paper, modified square loop frequency selective surface for dualband communication antenna systems is proposed, and the scattering characteristics is discussed. The analysis for the problem of scattering by periodic structures with a dielectric slab is formulated using the spectral-domain immittance approach and Floquet's theorem. The method of moments which uses rooftop subdomain basis function is employed to solve the equations. Numerical results include the comparison between the transmission characteristic of general square loop and that of modified square loop. Also, the transmission characteristics of modified square loop for arbitrary incident angle and polarization is presented. To verify analysis results, modified square loop frequency selective surface was fabricated and the calculated results were compared with the measured results. The measured results showed good agreement with the calculated results.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.12
• /
• pp.1352-1358
• /
• 2007

This paper address the statistical charateristics of MUSIC algorithm which is suggested as satellite direction finding algorithm. If the MUSIC algorithm is adopted as a satellite direction detection method in mobile TT&C system, then the statistical performance of the MUSIC algorithm will be closely related with the overall performance of the system. So statistical characteristics of the parameter in the respect of SNR and data length are addressed and then analyse the final effects to the satellite direction finding.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.12
• /
• pp.1359-1369
• /
• 2007

This paper describes the technique of satellite direction finding and main beam steering of the adaptive array antenna system which is used for mobile TT&C(Tracking Telemetry&Command) system. To be able to control the satellite on mobile vehicle while moving, the relative directional information of the satellite to the mobile vehicle is necessary to make main beam to the direction of satellite. To do this MUSIC, which is one of the super-resolution algorithm of wave direction finding, is used and then the performance analysis and quantization problem of phase shifter are addressed. This paper is valuable in the respect of showing feasibility of designing the moble TT&C using adative array antenna system.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.6
• /
• pp.581-588
• /
• 2015

In this paper, we researched that setting standard for RSC(Radar Cross Section) of naval surface ship could be determined and considered in various ways on ship's survivability, technical building feasibility, operation and so on. This study presented fundamental capacity on anti-ship missile, radar, flight and so no and the procedure to set of target/standards for RSC. The RCS standards is good at setting low as low as to improve survivability aspect, but because we should consider effect, technical limit, cost etc, this paper analyzed necessary elements to set standard than to suggest specific number and suggested procedure to set standars according to suggest the boundary of RCS.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.1209-1212
• /
• 2008

The high-speed EMU is assembled with distributed EMI sources. Therefore, it contains more electromagnetic sources nearby the distributed victims than the existing concentrated traction system. The electromagnetic sources and victims are identified in this research, and the methodology how to handle EMI/EMS/EMC of the high-speed EMU will be developed for safer operation. It includes measurement method, safety standards of control units and others, and performance evaluations of the firstly developed trial products for the EMU. Also influences by modern telecommunication equipments and effect of PLD(power line disturbance) are to be surveyed in this research.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.3
• /
• pp.446-450
• /
• 2001

Performance of spectrum-overlapped BPSK DS/SFH-SSMA communication system is considered in MAI and MTI channel. SSMA system is studied that the frequency spectrums of DS spread signals are overlapped. The increase of overlapping makes ACI and processing gain larger simultaneously. Therefore, BER performance can be optimized by controlling the amount of overlapping. BER equation are derived far the overlapping BPSK DS/SFH-SSMA communication system in multitone interference channel. From the numerical analyses and the simulation results, it can be concluded that the BER performance is considerably improved in optimized overlapping system.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.4
• /
• pp.562-569
• /
• 2001

This paper presents the optimum design method for T-shaped microstrip-line-fed slot antennas on various substrates. Since the impedance bandwidth of the antenna depends highly on the vertical offset position and the length of horizontal strip conductor, we derived the formulas regarding these design parameters to get the maximum bandwidth. The formulas can compute the offset position and the length of horizontal strip conductor for any given substrate parameters. We compared the results obtained by using these design formulas and the one obtained by the simulation for each slot width, and it showed very good agreement.