• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.1
• /
• pp.1-6
• /
• 2011

We have developed the process of forming one body S-type cantilever probe in the recessed trench for fine-pitched MEMS probe card. The probe (cantilever beam and pyramid tip) was formed using Deep RIE etching and wet etching. The pyramid tip was formed by the wet etching using KOH and TMAH. The process of forming the curved probe was also developed by the wet etching. Therefore, the fabricated probe is applicable for the probe card for DRAM, Flash memory and RF devices tests and probe tip for IC test socket.

• Proceedings of the Korean Information Science Society Conference
• /
• 2012.06c
• /
• pp.57-59
• /
• 2012

전자지불 임베디드 시스템의 DB는 목적 및 기능에 따라 다양하며 비용을 최소화 하기 위해 CPU, Memory, Storage 등이 범용 PC와 비교하여 낮은 성능을 가진다. 이와 같은 특징으로 인해 범용 database을 임베디드 환경에서 사용하는 경우, 요구 성능을 만족하지 못할 수 있다. 본 논문에서는 자체 구현한 전자지불 임베디드 환경에서 전자카드 리스트 관리 데이터 베이스 엔진(이하 DBX)와 임베디드 DB 중 Berkeley DB, SQLite와 함께 성능을 측정하고 해당 결과를 분석하였다.

• Convergence Security Journal
• /
• v.5 no.2
• /
• pp.57-63
• /
• 2005

According to rapid development of computer and wired-wireless internet, information exchange of networking is growing. Also according as size of industry related e-commerce is bigger, it is Required the necessity of convenient user authentication system. So, the study of new authentication method to have a security and convenience is progressing systematically. Smart card of new authentication method overcome problem of established scheme. So it prospect that will be replaced One Card to have a high security and multi-function. In this papar, we suggest about the implementation of One Card System that the security of smart card and usable in all fields.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.25 no.1
• /
• pp.5-15
• /
• 2015

Electronic transactions have been increasing with the development of the high-speed Internet and wireless communication. However, in recent years financial corporations and mobile carriers were attacked by hackers. And large numbers of privacy information have been leaked. In particular, in the case of credit card information can be misused in the online transaction, and the damage of this given to cardholder. To prevent these problems, it has been proposed to use a virtual card number instead of the actual card number. But it has security vulnerability and requires additional security infrastructure. In this paper, we analyzed the proposed virtual card number schemes. and we propose a new virtual credit card number scheme. In the newly proposed scheme, cardholder generates a key pair (public key/private key) and pre-register public key to the issuer. then, cardholder can pay no additional security infrastructure while still efficiently satisfy the security requirements.

• The Journal of Information Technology
• /
• v.3 no.3
• /
• pp.77-88
• /
• 2000

Electronic Commerce increased rapidly according to the growing popularity of Internet. but payment system are not changed. Now main payment system of electronic commerce are credit card and cyber banking system. Then credit card has some problems safety, privacy etc, and cyber banking system has some problem also. We need new payment system to Electronic Commerce. The merit of electronic money are more capacity, more secure, more reliable, quick and easy to update, secure off-line processing, enabling technology etc than credit card and cyber banking system. And so many countries began using experiment of electronic money and our country began July KOEX building. But it has some problems (standardization, safety of payment, etc). Therefor we must make nile about electronic money in order to standardization and safety of payment. After then electronic money are used widely in electronic commerce.

• Journal of Advanced Navigation Technology
• /
• v.11 no.3
• /
• pp.337-342
• /
• 2007

This paper proposes Electronic Credit Card(EMV) processing procedures for a credit payment method which can be applied to Korean ETCS(Electrical Toll Collection System). In Korea, Korea Highway Corporation services contactless ETCS's called by Hi-Pass and Touch-Pass system at present. These systems operate on a pre-paid payment method similar to electronic money. On the other side, a credit payment method based on credit card has an advantage which does not require pre-paid. The introduction of credit payment method to ETCS is in preparation. In this paper, we propose EMV processing methods based on a credit payment method which can be applied on ETCS.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2004.05a
• /
• pp.157-160
• /
• 2004

본 논문은 미국 차세대 디지털 케이블 방송 표준 규격인 오픈케이블($OpenCable^{TM}$)의 수신제한 모듈인 CableCard의 Physical Layer를 SystemC의 TLM(Transaction Level Modeling)과 RTL(Register-Transfer Level) 모델링 기법으로 설계하였다. 본 논문에서 설계한 CableCard의 Physical Layer는 PCMCIA Interface, Command Inteface 그리고 MPEG-2 TS Interface 로 구성된다. CableCard가 전원이 인가될 때, 카드 초기화를 위하여 동작하는 PCMCIA 인터페이스는 16 비트 PC 카드 SRAM 타입으로 2MByte Memory와 100ns access time으로 동작할 수 있게 설계하였다. PCMCIA 카드 초기화 동작이 완료된 후, CableCard의 기능을 수행하기 위하여 두 개의 논리적 인터페이스가 정의되는데 하나는 MPEG-2 TS 인터페이스이고, 다른 하나는 호스트(셋톱박스)와 모듈 사이의 명령어들을 전달하는 명령어 인터페이스(Command Interface)이다. 명령어 인터페이스(Command Interface)는 셋톱박스의 CPU와 통신하기 위한 1KByte의 Data Channel과 OOB(Out-Of-Band) 통신을 위한 4KByte의 Extended Channel 로 구성되고, 최대 20Mbits/s까지 동작한다. 그리고 MPEG-2 TS는 100Mbits/s까지 동작을 수행할 수 있게 설계하였다. 설계한 코드를 실행한 후, Cadence사의 SimVision을 통해서 타이밍 시뮬레이션을 검증하였다.

• Review of KIISC
• /
• v.22 no.8
• /
• pp.54-60
• /
• 2012

기존 마그네틱 카드의 보안성을 강화하기 위해 집적회로칩이 부착된 IC카드의 사용이 날로 증가하고 있으나 IC카드에 대한 보안 위협 또한 발생하고 있는 실정이다. 그 중에서도 암호화에 사용된 키를 찾기 위해서 암호 알고리즘의 이론적인 취약점이 아닌 암호화 과정에서 누설되는 수행시간, 소비전력, 전자기 방사 등을 이용하는 물리적 공격 방법인 부채널분석 공격이 대표적인 보안 위협이다. 본 논문에서는 부채널분석 공격 기법을 구현한 국내 외 시험 도구의 차이점 및 시험방법의 유효성을 확인하기 위해, 각 도구별 시험 결과를 전력분석 관점에서 비교 분석해 보았다. 시험 결과, 각 도구별 특징을 파악할 수 있었고, 시험 도구의 동작 방식에 다소 차이가 있으나 모두 동일한 결과를 도출해 낼 수 있었다.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.9 no.1
• /
• pp.3-14
• /
• 1999

In this paper, the Client-Server authentication system is proposed and implemented using the smart card on the internet. Based on the MPCOS-3DES smart card manufactured by GEMPLUS, three phases of authentication using the challenge-response mechanism are performed, which includes user-card authentication, client-server authentication, and card-server authentication.

• Proceedings of the KIEE Conference
• /
• 2006.04a
• /
• pp.240-242
• /
• 2006

The inspection method, which is used to inspect the electronic system for the control system of the fossil-powered thermal power plant, has the technical restrictions based on its primary application area, whereas the reliability is requested more and more by the plant operators to minimize the shutdown of a plant. This paper reviews the inspection methods currently used by the thermal power plant and how to adopt the condition based maintenance to increase the availability of power plant.