• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.06a
• /
• pp.369-370
• /
• 2009

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.06a
• /
• pp.141-142
• /
• 2008

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.10a
• /
• pp.509-515
• /
• 1997

환상형 이중벽 증기발생기와 환상형 전자펌프 신개념을 개발하여 중간열교환계통과 소듐 배관이 없는 단순하고 밀집된 형태의 액체금속로인 SAILMER 노형 개념을 제안하였다. 금속핵연료를 사용하는 모듈형으로 증기발생기에서의 소듐과 물 반응사고에 대비한 연구와 제작기술을 제고시키면 이 노형은 경제성과 고유안전성을 동시에 구현할 수 있다.

• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.9 no.3
• /
• pp.11-18
• /
• 2013

Small and medium-size buildings employ a multi-distributed individual air-conditioning system utilizing package air conditioners instead of centralized cooling systems, which can allow easier building management and maintenance along with a diversification of facility use. Inverter driven system heat pumps have been developed to achieve not only easy distribution control allowing free combination of indoor units with different models and different capacities, but also wide applications to an intelligent air conditioning. In this study, the transient performance of a system heat pump was analysed with the variation of compressor speed and EEV openings. The superheat was selected as a control parameter of the system, because the variation of it was consistent with each indoor unit capacity.

• Journal of Energy Engineering
• /
• v.12 no.4
• /
• pp.253-258
• /
• 2003

Manual type manifold gauge has been used for charging the refrigerant in the refrigeration systems. In this case, the refrigerant is released to the ambient during the hose-switching period. :he objectives of this study are to develop a novel automatic refrigerant charging system, and to quantify the effect of the automatic systems on the reduction of the non-condensable gas and the contamination of the compressor oil. The automatic charging system makes the pressure test, vacuum test, and refrigerant charging work very simple and easy because the charging hose does not have to be switched many times. It is found that the amount of water in the SiO$_2$and the compressor oil reduces to l/4 times of that for the manual type manifold gauge and the refrigerant is not released to the ambient at all when the automatic charging system is adopted.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.13 no.3
• /
• pp.171-178
• /
• 2008

Pressure control of hydraulic pump using SRM with pressure predictor and direct torque control method is presented in this paper. Nowadays, high efficiency and high performance motor drive is much interested in hydraulic pump system. But the hydraulic pump system has an inherent defect that its dynamic behavior causes by interaction between the sensor and hydraulic load. It will make low performance of whole system, even unstable and oscillatory. Proposed system integrates pressure predictor and direct instantaneous torque control (DITC). The pressure predictor includes Smith predictor, which is easy to improve unstable or long oscillation in traditional negative feedback control and popular PID control architectures. And DITC method can reduce inherent torque ripple of SRM, and develop smooth torque to load, which can increase stability and improve the torque response of SR drive. So high dynamic performance and stabilization can achieved proposed hydraulic system. At last, the proposed hydraulic system is verified by simulation and experimental results.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.1
• /
• pp.94-99
• /
• 2007

Many cases of acute cardiac shock and cardiac arrest in emergency room and ICU have been increasing. In this case, ECMO with centrifugal pump has been used generally. However, due to the heavy weight and big size, the system is not adequate for emergency cases. And other defects of this system are that membrane oxygenator's pressure is high and blood are exposed to the air. There was some tries of ECMO using pulsatile pump, but it was found that the weak point of these system is high peak pressure and hemolysis. The mechanism of twin pulsatile pump is that Membrane oxygenator Outlet Pump(MOP) make negative pressure when Membrane oxygenator Inlet Pump(MIP) provides high positive pressure, and the negative pressure will decrease positive pressure of Membrane Oxygenator. Our group analyzed this advantage through In-Vitro and 12 Cases In-Vivo test.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.10
• /
• pp.84-92
• /
• 2010

In this study a numerical analysis has been conducted for the flow characteristics and pumping performance of a piezoelectric-based micropump with electromagnetic resistance exerted on electrically conducting fluid. Here, electromagnetic resistance is alternately applied at the inlet and outlet with alternately applied magnetic fields in association with the reciprocal membrane motion of the piezoelectric-based micropump. A model of Prescribed Deformation is used for the description of the membrane motion. The internal flow characteristics and pumping performance are investigated with the variation of magnetic flux density, tube size, displacement of membrane and the frequency of the membrane. It turns out that the current micropump has a wide range of pumping flow rate compared with diffuser-nozzle based micropumps.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2022.11a
• /
• pp.827-829
• /
• 2022

본 논문은 코로나19로 인해 발생하는 우울증을 개선하고 태양광 패널을 이용하여 친환경적으로 재배할 수 있는 "태양광 에너지를 활용한 지능형 자율이동 채소재배기"를 제안한다. 본 논문이 제안하는 주요한 특징은 다음과 같다. 첫째, 태양광 패널을 이용하여 재배기에 전원을 공급한다. 둘째, 카메라와 OpenCV를 이용하여 채소의 상태를 매일 확인 후 LED 색상을 조절하여 최적의 채소 성장 환경을 만든다. 셋째, 수위 센서와 모터 펌프를 이용하여 자동으로 물이 공급될 수 있도록 하고, 수온과 수질을 주기적으로 체크하는 등 Human task를 감소시킨다. 넷째, DC모터를 이용하여 실내·외로 자율이동을 하고, 액추에이터를 이용하여 채소가 햇빛을 최대한 많이 받아 성장할 수 있도록 한다. 제안하는 시스템은 가정에서 채소를 재배하는 방식에 IoT기술을 활용하여 사용자의 편의성을 증가시키고, 녹색식물을 통해 '코로나 블루'를 해소하고자 하는 사람에게 필요한 "태양광 에너지를 활용한 지능형 자율이동 채소재배기"의 개발을 목표로 한다.

• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.347-348
• /
• 2016

본 논문에서는 차동전력조절기회로가 적용된 승압형 태양광 차지펌프 플라이백 전하 균등화 회로를 사용하여 연속 모드로 동작하는 전하 균등화 방법을 제안한다. 이 컨버터는 차동전력조절기회로의 입력부에 커패시터가 병렬로 연결되어 있어서 포워드 컨버터가 아닌 벅 컨버터로 동작을 한다. 이로 인하여 기존 포워드 컨버터가 갖고 있는 동작 한계점을 극복할 수 있다. 즉 차동전력조절기회로의 듀티 비가 부스트 회로의 듀티 비 보다 작을 필요가 없다. 또한 실제 현장에 적용할 때 문제가 되는 긴 라인으로 인한 기생 인덕턴스 발생 시 차동전력조절기회로의 스위치에 큰 스파이크가 발생 할 수 있는데 이를 커패시터가 흡수하는 장정을 갖는다.