• Computational Structural Engineering
• /
• v.2 no.4
• /
• pp.5-10
• /
• 1989

CAD/CAM 과정에서 컴퓨터 그래픽은 매우 중요한 역할을 하고 있고, 앞으로 이 분야에서 그래픽 응용과 그 기법의 개발은 무궁할 것으로 예측된다. 또한 전 공정의 총합 CAD 과정에서 이들 컴퓨터 그래픽과 공학해석의 접속은 필수불가결할 것이다. 공학해석 분야에는 현재 유한요소법이 대종을 이루고 있으나 아직도 이러한 해석분야와 그래픽분야를 완전하게 접속시켜 전 공정의 설계를 컴퓨터로 자동화 하는데는 많은 시간이 요할 것 같다. 그러나 컴퓨터 하드웨어 값이 지속적으로 하락하고 저렴한 CAD 관련 소프트웨어가 개발될 것을 예상해 볼 때 설계 및 제작 자동화가 가까운 장래에 대단히 큰 진전을 이룰 수 있을 것으로 보인다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.2
• /
• pp.507-514
• /
• 1991

A penalty finite element method has been developed for accurately predicting stress distributions at the tool-workpiece interfaces. The basic formulation is described, with the emphasis on the algorithm to deal with the normal stress and the frictional stress at the interface. Comparison with the experimental data and the theoretical solutions found in the literature is made for the forming processes selected.

• Journal of the Korean Society for Railway
• /
• v.13 no.4
• /
• pp.382-388
• /
• 2010

This paper describes the standardized finite element model for carbody structures of railway vehicle made of sandwich composites. Recently, sandwich composites were widely used to railway vehicle due to the improvement of energy efficiency, high specific stiffness and strength, weight reduction and space saving in korea. Therefore, structural integrity should be verified using finite element analysis prior to the manufacture of composite railway vehicle. The standardized finite element model for composite carbody structures was introduced through comparing the results of real structural test under vertical, compressive, twisting load and natural frequency test of various railway vehicles in this study. The results show that the quadratic shell element is suitable to model the reinforced metal frame used to improve the flexural stiffness of sandwich panel compared to beam element, and layered shell and solid element are recommended to model the skin and honeycomb core of sandwich panel compared to sandwich shell element. Also, the proposed standard finite element model has the merit of being applied to crashworthiness problem without modifications of finite element model.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.5 no.1
• /
• pp.63-72
• /
• 2001

상부 벽체와 하부 골조로 구성되는 주상복합건물은 전이층에서 수직적인 강성과 강도의 불연속성을 갖는다. 이러한 복합구조는 전이층에서 춤이 큰 보에 의하여 하중이 전달되면 설계시 매우 중요하게 고려하여야 하는 사항이다. 그러나 이에 대한 연구가 충분히 이루어져 있지 않으며 실제 전이보의 설계시 춤을 매우 크게 하여 요구되는 강도보다 큰 안전율이 고려되고 있다. 본 연구에서는 전이층의 단순화모델을 이용하여 보의 높이 및 지지면의 길이에 따른 아치거동의 변화를 조사하였다. 유한요소법을 이용하여 구조물을 분석하고 두 변수를 포함하는 헌치부재를 이용하여 그 효과를 기존 시스템과 비교하였다. 중요 변수와 헌치의 기울기는 1:1의 비율에서 사장 효율이 좋은 것으로 나타났으며, 이러한 결과를 전이보를 대신하여 사용한 결과 중력방향의 상부 아치거동에 대하여 효과적으로 작용하는 것으로 나타났다. 또한 응력 집중부위에서의 응력 감소와 깊이 전이보의 높이감소에 효과적으로 작용하는 것으로 나타났다.

• Journal of the Korean GEO-environmental Society
• /
• v.25 no.4
• /
• pp.29-35
• /
• 2024

This is an analytical study to confirm the passive resistance effect before post-tensioning of steel bar anchors. When using a steel bar as a permanent anchor, if displacement occurs within the slope even before the head load is applied, the displacement is suppressed by the passive resistance caused by the interaction between the steel bar, grout, and surrounding soil. Accordingly, the shape of the failure surface and changes in the safety factor were examined using limit equilibrium analysis and finite element analysis targeting sites where steel bar anchors were actually applied. It was found that the safety factor of the slope reinforced with steel bar anchors is 2.02 using finite element analysis, which is about 5.9% smaller than 2.14 using limit equilibrium analysis. Also, the location of the failure surface was found to be deeper compared to the unreinforced slope. Likewise, the factor of safety has a 153% and 163% increase using finite element method and limit equilibrium analysis, respectively. In addition, the maximum displacement occurs in the lower unreinforced section within the slope, and the displacement is found to be reduced by 42 to 83% at the location where the steel bar anchors are installed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.9
• /
• pp.1073-1080
• /
• 2012

Incremental forming is a cold working process in which a small part of the material is being deformed and the area of local deformation is moving over the entire material. In this paper, we study description schemes to perform finite element analysis for the incremental forming. The selected description schemes to examine are the Lagrangian description and the arbitrary Lagrangian-Eulerian (ALE) description. The sliding boundary scheme coupled with ALE is also examined to overcome the distortion problems of elements on the contact surface. Results show that the ALE description with the sliding boundary scheme is most favorable in overcoming the distortion of elements. This description leads to make the simulation continued to the final stage of the incremental forming. On the other hand, the Lagrangian description as well as the original ALE description makes the elements much distorted and the analysis is stopped long before arriving at the final shape of deformation.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1550-1551
• /
• 2011

본 논문은 가정에서 사용하는 중 저압용 차단기의 차단 능력을 향상시키기 위한 방법에 초점을 두었다. MCCB의 차단 능력은 MCCB내부 부품들의 재료나 형상 그리고 배열 등 여러 요소에의해 결정된다. 특히 본 논문에서는 MCCB 그리드의 형상을 변화하여 소호시간을 단축하는 방법을 제안하였다. 사고에 의해 차단기가 작동하게 되면 차단기 내부 접점에서 Arc가 발생하게 된다. 이때 발생된 Arc에의한 2차 사고를 방지하기위해, Arc를 빠른 시간에 소호시켜야한다. Arc가 발생하게 되면 Arc내부는 도체처럼 전류가 흐르게 되는데 이 전류에 의해 소호부의 그리드를 따라 자속이 형성된다. 그리드의 형상에 따라 Arc 기둥 주변에 불균형적인 자속이 유도되고 이 불균형한 자속에 의해 Arc 주변에는 불균형한 로렌츠힘이 발생하여 일정 방향으로 힘이 작용하게 된다. 이때 발생한 로렌츠힘 에의해 Arc 기둥은 그리드 방향으로 소호된다. 분석을 위해 유한요소법을 이용한 시뮬레이션을 사용하였고 그리드 형상 변화를 통해 일정방향으로 로렌츠힘이 변화 전보다 증가한 결과를 얻었다. 본 논문의 내용에 추가로 그리드 내부에서 자속의 이동을 효율적으로 전달하기위한 방법을 연구하면 더 큰 로렌츠힘을 얻어 소호시간을 단축시킬 수 있을 것으로 사료된다.

• The korean journal of orthodontics
• /
• v.26 no.2 s.55
• /
• pp.219-232
• /
• 1996

The purpose of this study was to evaluate treatment effects of bionator in Class II division 1 malocclusion by FEM(Finite Element Method). The 73 subjects were classified into good result group and poor result group in reference to posttreatment molar relation, posttreatment overbite and overjet, posttreatment profile, and relapse. Pretreatment and posttreatment lateral cephalograms were taken and FEM was performed. The results were as follow; 1. There was no statistical significance in treatment changes between the sexes, and between the treatment result groups. 2. Treatment changes were not significantly different among the age groups. 3. The effect of treatment period groups on skeletal and dentoalveolar changes were analyzed using ANOVA. Body of maxilla, upper incisor, anterior face, ramus, upper anterior face, lower anterior face and treatment effect were correlated with the treatment period, but correlation coefficients were low. 4. The results of present investigation confirm that Class II bionator can assist in the correction of Class II division 1 malocclusion, mainly due to dentoalveolar changes. 5. There is significant difference in skeletal and dentoalveolar pattern between good result group and poor result group. In poor result group, maxilla was relatively downward and backward rotated, mandible was relatively backward rotated, upper incisor was in relatively lingual position, lower incisor was in relatively labial position.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.5
• /
• pp.2403-2407
• /
• 2012

Finite number of pile elements are considered in load transfer method. And section force and movement of each pile element are computed by considering compatibilities between pile displacement and the load transfer along a pile and between displacement and resistance at the tip of the pile. For the conventional load transfer method, large amount of computations due to iterations are needed. Formulation of finite difference equation from the differential equation which depicts pile behavior under axial loading was accomplished in order to simplify the computation for obtaining pile section forces and displacements. By comparing the results between the simplified computation method and the reported data, there was no difference between the two results.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.11
• /
• pp.4950-4955
• /
• 2012

A bolt manufacturing process is completed with continuous forging. Technical and economical success of each process will depend on the appropriate process design and metal mold design for each procedure. This study aims to analyze the moldings of first and second steps among the multi-step molding processes of SCM435 bolt by use of the finite element method in order to achieve the reasonable process. Since the processes of first and second steps analyzed by use of the finite element method consist of axial symmetry, the transformed configuration of material satisfy the dimensions expected in process. In addition, the uniflow line formed in material becomes smooth and consistent over the entire process. Therefore neither molding of material nor inherent defect is expected.