• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.521-523
• /
• 2009

본 연구에서는 식물성유지와 메탄올로부터 전이에스테르화 반응에 의해 바이오디젤 제조에 사용되는 비균질촉매로 사용하기 위하여 NaX 제올라이트 촉매에 염기도를 향상시키기 위하여 KOH를 담지하여 담지량에 따른 바이오디젤 제조특성을 조사해보았다. KOH 담지량을 10wt% - 70wt%로 달리하여 Incipient wetness 방법으로 담지한후 $500^{\circ}C$에서 소성하여 촉매를 제조하고, 제조된 KOH의 담지량이 다른 KOH/NaX 제올라이트 촉매는 SEM, XRD, BET등을 통해 촉매특성을 평가하였고, 생성된 지방산 메틸에스테르는 가스크로마토그래피로 순도를 측정하였다. NaX 제올라이트 촉매에 KOH 담지량이 높은 경우와 촉매량이 많은 경우 바이오디젤제조에 유리하였고, 특히 반응시간과 반응온도는 $120^{\circ}C$, 2시간동안 반응한 경우 가장 좋은 지방산 메틸에스테르의 수율을 얻을 수 있었다.

• Polymer(Korea)
• /
• v.32 no.1
• /
• pp.56-62
• /
• 2008

Three types of network polyesters have been newly synthesized by a two-step condensation reaction by the various combination of several diols and diacids. When these polymer films were thermally treated at $240^{\circ}C$, they exhibited absorptions in a visible range despite the forbidden transition of carbonyl group. When excited at wavelengths above 330 nm, the polymers showed fluorescences in a wide visible range from blue to near yellow. These fluorescence phenomena are due to the formation of certain conjugated structures by the Knoevenagel type self-condensation under the high-temperature thermal treatment. These polymers showed significant difference in the thermal properties as a function of the degrees of chemical crosslinking. They also underwent photodegradation. Highly resolved, fluorescent image patterns were successfully obtained by the photodegradation of malonate group under a strong UV-light irradiation.

• Korean Chemical Engineering Research
• /
• v.46 no.4
• /
• pp.747-751
• /
• 2008

The effect of additives in the synthesis of biodiesel fuel using supercritical methanol was studied in order to examine the possibility of application of spent vegetable oil as a raw material, which has high contents of water or free fatty acid. The experiments were performed by varying the contents of water, free fatty acid or antioxidants respectively in a batch reactor. The contents of fatty acid methyl ester was analyzed by a gas chromatography. As the water contents increased, the contents of fatty acid methyl ester decreased, however, the decrease was very little compared with the alkaline and acid catalyst. The effect of the contents of free fatty acid, vitamin E, and ${\beta}$-carotene was negligible.

• KSBB Journal
• /
• v.22 no.4
• /
• pp.228-233
• /
• 2007

The high cost and lack of vegetable oil are limiting the expansion of biodiesel production. The purpose of research was to investigate the potential of animal fats as biodiesel feedstock. In this paper, transesterification using alkali catalyst and methanol was performed to reaction, we carried out experiments that it was changed variables as reaction temperature, methanol molar ratio, catalyst types, amount of catalyst and reaction time. The optimum reaction condition for biodiesel production was reaction temperature 65$^{\circ}C$, potassium hydroxide 1.0% (w/w), oil to methanol molar ratio 1:15 and reaction time 20 min. In this reaction condition, the contents of fatty acid methyl ester was reached to about 98.7%. Also, properties of biodiesel were measured to correspond to domestic quality standard of acid values, density and viscosity.

• KSBB Journal
• /
• v.22 no.4
• /
• pp.222-227
• /
• 2007

Biodiesel (fatty acid methyl esters) have used to as substitutes for petro-diesel by mixed-form with petro-diesel. In several processes of biodiesel production, alkali-catalyst transesterification produced to biodiesel of high contents with short reaction time. In this study, we investigate the optimal condition of alkali-catalyst transesterification of rapeseed oil produced at Jeju island in Korea using response surface methodology. The optimal condition of biodiesel production is reaction temperature 59.7$^{\circ}C$, catalyst amount 1.18%, oil to methanol molar ratio 1:8.75, and reaction time 5.18 min. At that reaction condition, the fatty acid methyl ester contents of product are above 97%. Our results may provide useful information with regard to the development of more economic and efficient biodiesel production system.

• 한국생물공학회:학술대회논문집
• /
• 2001.11a
• /
• pp.787-790
• /
• 2001

Emulsified transesterification of soybean oil into biodiesel was investigated using potassium hydroxide and sodium methoxide catalysts with methyl glucoside oleic polyester as a methanol-in-oil emulsifier. The transesterification reaction conditions were optimized to obtain high yields of fatty acid methyl esters of the quality defined by biodiesel standards. The developed process resulted in $95{\sim}96%$ of overall yield from soybean oil by alkali-catalyzed methanolysis at $45^{\circ}C$ of reaction temperature with 6:1 of methanol-to-oil molar ratio and l(v/v)% methyl glucoside oleic polyester in the presense of 0.8wt% KOH and 1.2wt% $NaOCH_3$.

• Applied Biological Chemistry
• /
• v.51 no.3
• /
• pp.177-182
• /
• 2008

This study was carried out to investigate the reaction of lipase-catalyst transesterification using animal fat recovered from fleshing scrap generated during leather making process. Transesterification reaction between fat and primary or secondary alcohol was carried out under the condition of immobilized enzyme catalyst. The conversion rate was the highest when 1.5 mole of methanol was injected by 4 times. As for lipase, Candida antarctica showed the highest conversion rate of 82.2% among the 4 different lipases. It was found that water contained in the fat causes lower conversion rate. The condition of 1.2wt. % of water in the fat decreased the conversion rate by 40%. It was considered that the resulted reactant, fatty acid ester could be used as raw material for biodiesel with the characteristics of not generating SOx and diminishing smoke.

• Applied Chemistry for Engineering
• /
• v.23 no.3
• /
• pp.344-347
• /
• 2012

The basic strength of the MgO catalyst was enhanced by impregnating it with KF to synthesize a highly active catalyst for the bio-diesel production. To increase basicity, KF impregnated on synthesized MgO in laboratory. The synthesized catalyst was characterized using $N_2$ adsorption-desorption, X-Ray diffraction, X-Ray fluorescence, and $CO_2$ temperature programmed desorption analyses. Bio-diesel was produced from soybean and methanol and its fatty acid methyl ester content was measured to evaluate the activity of the catalyst. The catalyst impregnated with 30 wt% KF exhibited the highest activity, which was attributed to its abundant intermediate base site.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.589-593
• /
• 2007

재생 가능한 자원인 동식물성 기름을 원료로 제조되는 수송용 연료 바이오디젤은 낮은 대기오염물질 배출과 $CO_2$ Neutral 특성으로 환경친화적인 연료로 인정을 받으며 전세계적으로 그 생산량이 급격히 증가하고 있다. 대부분의 상용화 공정은 염기촉매를 이용한 전이에스테르화 반응에 근거하고 있으며 높은 생산성을 위해 연속 공정을 채택하고 있다. 원료유 중의 유리지방산(free fatty acid, FFA)은 염기 촉매와 반응하여 지방산염(Soap)과 수분을 생성하며 반응촉매의 투입양을 증가시카고 반응 후에 글리세롤과 지방산 메틸에스테르와의 분리를 어렵게 만든다. 높은 수율과 후속공정의 부하를 줄이기 위해서는 식물성 원료유 중의 FFA는 고체 산촉매 하에서 메탄올과 에스테르화 반응시켜 전환 제거되어야 한다. 본 연구에서는 고체산 촉매인 Amberlyst-15을 충전한 4단 PBR(Packed Bed Reactor, 충전율 60%(v/v))에서 반응시간과 반응온도에 따른 대두원유의 전처리 효율을 조사하였으며 최적 전처리 조건을 도출하였다. 최적 전처리 조건에서 대두원유는 초기 산가 1.6에서 0.4-0.6으로 연속 전처리할 수 있었다. 본 연구에서는 연속 흐름 반응기인 PFR(Plug Flow Reactor)와 4단 CSTR(Continuous Stirred Tank Reactor)에서 균질계 촉매인 KOH 존재하에 대두유와 메탄올과의 전이에스테르화 반응 특성을 조사하였으며 각 연속 반응시스템에서 최적 운전 조건을 도출하였다. PFR 반응기에서 반응온도, 반응시간, 반응물 흐름방향, static mixer(SM) 개수에 따른 반응특성을 조사한 결과, PFR에서의 최적 반응조건은 하향류 흐름 방향과 3개의 SM를 설치한 조건에서 반응시간 5.8분, 반응온도 90$^{\cdot}C$, 메탄올:오일 몰비 9:1, KOH 농도 0.8%로 도출되었다. CSTR 반응기에서는 반응온도와 체류시간에 따른 반응특성을 조사하였으며 최적반응 조건으로 반응온도 80$^{\cdot}C$, 메탄올/오일 몰비 9:1, KOH 농도 0.8%, 체류시간 18.4분, 교반속도 250rpm로 조사되었다.

• Journal of the Korean Society of Industry Convergence
• /
• v.5 no.2
• /
• pp.147-152
• /
• 2002

Because of the difference of the relative reactivity between two hydroxyl groups of the hydroquinone due to the steric hindrance of the substituent, many combinations of the substituent direction in the polyesters derived from asymmetrical diphenols such as monosubstituted hydroquinones was expected. It was studied how the mode of the direction affected the properties of the resulting polyesters in terms of the transition temperatures of the thermotropic polyesters prepared from terephthalic acid, 2,4-dichloroterephthalic acid, and phenylhydroquinone by the reaction using p-Toluenesulfonylchloride in pyridine. The direction was tried to control the relative reactivity by changing the reaction temperature and addition time of the hydroquinone, and by modifying it through an association of the hydroquinones with DMF.