• Journal of the Korean Wood Science and Technology
• /
• v.45 no.5
• /
• pp.629-639
• /
• 2017

Tripitaka Koreana in Haein Temple, Hapcheon Province is the most historical and largest heritage in this country, however the species of their blocks have yet been unknown. A nondestructive test method is necessary to investigate their species. The oven-dry density of wood was measured by inversely using the principle of high frequency moisture meter. The oven-dry densities of more than 100 domestic species of specimens estimated by measurement method and high frequency moisture meter were compared and following conclusions were obtained. There was highly close correlation between the oven-dry density estimated by measurement method and the oven-dry density estimated by high frequency moisture meter. The densities of Tripitaka Koreana that was a global cultural heritage could be correctly estimated by using high frequency moisture meter and the equilibrium moisture content under which Tripitaka Koreana equilibrated, thus, it was expected to provide the key to species identification.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.2
• /
• pp.218-226
• /
• 1999

This paper describes resonant mode selection with which the relative permittivity can be measured exactly. To measure the relative permittivity, a circular cylindrical cavity filled with dielectric material is used. When the circular cylindrical cavity is filled with the dielectric material, the air gap occurs on account of machining error. Accurate relative permittivity can be obtained by using less sensitive mode in resonant frequency variation by the air gap. As a result, Average 0.009% resonant frequency variation in the vertical and the radial direction appears at $TE_{011}$ mode. It is interesting that the frequency variation by the air gap at $TE_{011}$ mode turns out to be the least sensitive.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.1105-1110
• /
• 2008

An experimental study was performed to control Ice Packing Factor (IPF) of ice slurry in a pipe in a real time. This paper presented the concept that IPF can be adjusted by the amount of the solution contained to ice slurry. Based on this concept, we designed IPF controller consisting of the outlet tube providing ice slurry and the upper tube discharging only a solution through holes, and investigated the technical validity and efficiency of the controller experimentally. As a result, the original proposed IPF controller could not control IPF of ice slurry in a pipe. This is because an ice of ice slurry was drained out into not only the outlet but also the upper of the controller due to the size of the holes relatively large compared to the ice particle. Therefore, we changed the hole size of IPF controller surface using fine meshes and then, observed that IPF in a pipe was increased by $4{\sim}7$ percent when the hole size was $80{\mu}m$ and less.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.20 no.12
• /
• pp.825-832
• /
• 2008

The ice slurry maker which can produce the ice slurry well for the ice particle in-flowing condition was revised. We removed the stagnant region at the top of the ice slurry maker, and IPF 40% could be realized. The IPF controller with 6 mm diameter holes at the bottom was designed. But the IPF controller with only 6 mm diameter holes could not control IPF in a pipe. This is because the ice particles at ice slurry flow exist homogeneously not only at the upper part but also at the bottom part. We changed the hole size of IPF controller surface using fine meshes and then, IPF in a pipe was increased by 70% when the hole size was $80{\mu}m$ and less.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.323-324
• /
• 2006

저온동시 소결용 세라믹스, LTCC를 사용한 RF/MW용 고유전율 세라믹을 개발하기 위하여 300이상의 고유전율과 낮은 손실 계수를 가지는 것으로 알려진 $Ag(Nb_{1/4}Ta_{3/4})O_3$ 고용체와 $CaTiO_3$, $TiO_2$를 각각 혼합하여 공진주파수의 온도 계수가 0에 가까운 안정된 유전체 특성을 얻고자 하였다. 유전율의 온도 안정성을 도모하기 위해 음의 온도 계수를 갖는 $CaTiO_3$, $TiO_2$와 양의 온도계수를 갖는 $CaTiO_3$ 및 $TiO_2$를 일정 분율로 혼합한 복합체 구조의 시편을 제작하였다. LTCC 소자로의 적용을 위해 3wt.%의 CuO를 첨가하여 소결 온도를 낮추었으며, 소결 시편의 상 분석, 미세구조 및 전기적 특성을 조사하였다.

• Management & Information Systems Review
• /
• v.28 no.3
• /
• pp.1-23
• /
• 2009

Prior bankruptcy studies have established that bankrupt firm's pre-filing financial ratios are different from those of healthy firms or of randomly selected going concerns. However, they may not be sufficiently different from the financial ratios of other firms in financial distress to allow the development of a ratio-based model that predicts bankruptcy with reasonable accuracy. As the result, in the multiple discriminant model, independent variables divided firms into bankrupt firms and healthy firms are retained earnings to total asset, receivable turnover, net income to sales, financial expenses, inventory turnover, owner's equity to total asset, cash flow to current liability, and current asset to current liability. Moreover four variables Retained earnings to total asset, net income to sales, total asset turnover, owner's equity to total asset indicate that these valuables classify bankrupt firms and distress firms. On the other hand, Owner's Equity to borrowed capital, Ordinary income to Net Sales, Operating Income to Total Asset, Total Asset Turnover and Inventory Turnover are selected to predict bankruptcy possibility in the Logistic regression model.

• Tuberculosis and Respiratory Diseases
• /
• v.56 no.5
• /
• pp.485-494
• /
• 2004

Background : To assess the effects of mDOT implementation on sputum smear conversion for AFB (Acid fast bacilli) positive pulmonary tuberculosis patients, modified Directly Observed Treatment (mDOT) was started on October $8^{th}$ 2001 at a health center in Seoul. mDOT was defined through weekly interviewing and supervising of a patient by a supervisor (doctor, nurse, or lay health worker). The sputum smear conversion of a mDOT group was compared with that of a self-medication (self) group. Methods : This study included 52 AFB positive pulmonary tuberculosis patients registered at a health center in Seoul between October $8^{th}$ 2001 and April $23^{rd}$ 2002. 24 and 28 patients were enrolled in the mDOT and self medication groups, respectively. Paired (1:1) individual matching, by gender, extent of disease, relapse and age-matching variables, was performed between the two groups, resulting in 20 paired matches. This prospective study was planned as an unblinded, non-randomized quasiexperimental pilot project. Outcomes were identified from results of sputum smear examinations for AFB in both groups at 2 weeks, and 1 and 2 months. The paired matching data were analyzed using the SAS program version 8.1 by McNemar test. Results : At the end of 2 weeks of treatment, the sputum smear conversion of the mDOT group was somewhat higher than that of the self medication group (78.57 vs. 50%, p-value=0.289), and after 1 month of treatment no statistically significant difference was shown between the two groups (83.33 vs. 50, p-value=0.125). At the end of 2 months of treatment (initial intensive phase), the sputum smear conversions of the mDOT and self groups were 95 and 75%, respectively (p-value=0.219). Conclusions : The implementation of mDOT did not result in clinically significant increases in the sputum smear conversion at 2 weeks, and 1 and 2 months compared with that of the self medication group. However, the increases experienced might contribute to diminishing the infectious period of AFB positive patients, and this approach may act as a guide for a specific group of patients. In this study, mDOT was performed for one hundred percent of the intensive treatment phase. It can also be an effective treatment for pulmonary tuberculosis patients, and may be useful for some high risk tuberculosis patients.

• Polymer Science and Technology
• /
• v.14 no.1
• /
• pp.48-56
• /
• 2003

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.4 no.1
• /
• pp.570-579
• /
• 1961

• Ceramist
• /
• v.4 no.4
• /
• pp.15-20
• /
• 2001