• Journal of Conservation Science
• /
• v.25 no.4
• /
• pp.383-398
• /
• 2009

We have investigated chemical properties of the pigments and carried out the deterioration diagnosis using nondestructive techniques of the wall painting in Yaksajeon Hall of Gwanyongsa Temple. As the results of pigments analysis, it was unusual that the cobalt was detected in the blue and green colors used to traditional paint background. According to the deterioration diagnosis, ultrasonic measurement and infrared thermography, dominant cracks and exfoliation caused by high content of moisture. Therefore, it should be devised effective plan to prevent penetration of water for the long term this wall painting.

• Archives of design research
• /
• v.19 no.5 s.67
• /
• pp.105-118
• /
• 2006

From a general perspective of design history, the design methodology movement is interpreted in relations to the rationalistic and universal characteristics of modernism. This essay explores a historical context of the movement, focusing on its discursive and practical relations to cyborg sciences that has been shaped by the research and development of military technology in Cold War America. The formation of such relations could be largely devided into two processes: One is the process in which methods and techniques of system science that included operation research, system analysis, and system engineering, were appropriated by the first generation methodologists who had tried to establish "the science of design", and the other is the one in which Herbert Simon's studies on problem solving and artificial intelligence became profoundly embedded in theoretical frameworks of design methodology after the first generation. Examining such processes critically, this essay argues that a design process became finally redefined by the third generation methodology, as a 'feedback loop' of circulation of production and consumption, that is, an apparatus of information-processing which gives a concrete form to the "invisible hand" of markets.

• Journal of Conservation Science
• /
• v.31 no.4
• /
• pp.395-402
• /
• 2015

This study was considered utilization of hyperspectral image analysis for monitoring. Accordingly we applied to stone cultural properties to data correction methods, image classification techniques, NDVI computation techniques using hyperspectral image. As the results, hyperspectral image analysis was possible making detailed deterioration map, accurate calculation of deterioration rate, mapping of normalized difference vegetation index on the basis of reflectance of each materials. Therefore, hyperspectral image analysis will be used for effective monitoring techniques of stone cultural heritages.

• 보존과학연구
• /
• s.34
• /
• pp.32-48
• /
• 2013

This study examined the applicability of deterioration monitoring techniques to establish efficient conservation and management system for stone cultural heritage which conservation treatment has been done. It was confirmed that deterioration mapping combined with photography and grid work, and adhesive tape test for the surface were very applicable to investigate the surface change due to deterioration, and assess the degree of granular disintegration quantitatively. The portable microscopic survey and ultrasonic measurement were efficient techniques to observe mineral looseness and microcrack, and to track the strength change of the stone before-and-after the conservation treatment. These techniques can be easily used by manage practitioners in the field through simple guidance and technical education. Also, it can contribute to build a long-term and methodical conservation and management system of the stone cultural heritage.

• Journal of the Korean Data and Information Science Society
• /
• v.21 no.3
• /
• pp.535-546
• /
• 2010

There are two methods in grouping customers for micro marketing promotion. The one is based on how much they paid and the other is based on how many times they purchased. In this study we are interested in the repurchase probability of customers. By analysing the customer's transaction data and demographic data, we develop a forecasting model of repurchase and make epurchase indexes of them. As a modeling tool we use the logistic regression model. Finally we categorize the customers into five groups in according to their repurchase indexes so that we can control customers effectively and get higher profit.

• Applied Chemistry for Engineering
• /
• v.10 no.3
• /
• pp.394-399
• /
• 1999

As the prosthetic application of natural mineral substituted for chemical reagent, composites and a glass-ceramics containing hydro-xyapatite isolated from tuna bone were prepared by solid state reaction. On x-ray examinations, the major phases of composites were identified as pseudowollastonite(${\alpha}-CaSiO_3$) and ${\beta}$-tricalcium phosphate($\beta$-TCP) and the phase of a glass-ceramics was observed as $\beta$-TCP and fluoroapatite caused by $CaF_2$ respectively. SEM images depict that the microstructures of grain at the composites were a function of temperature. The measured strength of a glass-ceramics prepared at $900^{\circ}C$ for 4 hr in air was 90 MPa as a 4-point bending method and this value was similar to the cortical bone, as 50~150 MPa but it was lower than its maximum strength.

• Applied Chemistry for Engineering
• /
• v.8 no.6
• /
• pp.1000-1005
• /
• 1997

The properties of ceramics by solid-state reaction with hydroxyapatite[$Ca_{10}(PO_4)_6(OH)_2$], which was isolated from tuna bone by wet milling process were investigated. The bulk density $2.93g/cm^3$ at $1350^{\circ}C$ was close to the calculated density $3.21g/cm^3$. On X-ray measurements, the major phases were identified as hydroxyapatite at below $1300^{\circ}C$, but the whitlockite [$Ca_3(PO_4)_2$] phases were appeared due to a decomposition of hydroxyapatite with temperature. The microstructures of sintering specimens were shown as small closed pores between grain boundaries. The mean bending strength of the sintered hydroxyapatite by solid-state reaction is about 58 MPa and this value is higher than that of the articular cartilage maximum strength, 40MPa.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.3
• /
• pp.39-47
• /
• 2015

In this study, the properties of strength and drying shrinkage of alkali-activated slag cement (AASC) with magnesium oxide (MgO) contents between 0 and 16 wt% were investigated. The ground granulated furnace blast slag (GGBFS) was activated by potassium hydroxide (KOH) and dosage of activator was 2M and 4M. The MgO was replaced with 2% to 16% of GGBFS by weight. The water-binder ratio (w/b) was 0.5. In the result, the higher MgO content leads to a slightly higher degree of reaction and thus to a higher compressive strength at all ages. The compressive strength and ultra sonic velocity (UPV) increased with increases MgO contents. The drying shrinkage of AASC was decreased as the contents of MgO increases. The results from SEM confirmed that there were densified reaction product of higher MgO content specimens.

• Journal of Digital Contents Society
• /
• v.16 no.1
• /
• pp.157-164
• /
• 2015

The existing input device is limited to keyboard and mouse. However, recently new type of input device has been developed in response to requests from users. To reflect this trend we propose the new type of input device that gives instruction as analyzing the hand motion of image without special device. After binarizing the skin color area using Cam-Shift method and tracking, it recognizes the hand motion by inputting the finger areas and the angles from the palm center point, which are separated through labeling, into four cardinal directions and counting them. In cases when specific background was not set and without gloves, the recognition rate remained approximately at 75 percent. However, when specific background was set and the person wore red gloves, the recognition rate increased to 90.2 percent due to reduction in noise.

• Journal of the Society of Naval Architects of Korea
• /
• v.38 no.3
• /
• pp.93-106
• /
• 2001

T-joint and hopper knuckle joint models are typical welded joints in ship structure, which are very susceptible to fatigue damage under service condition. Fatigue test and fracture mechanical analysis were performed on these joints to find out characteristics of fatigue behavior. Unified S-N curve was developed from the test results of these two types of joint using hot spot stress concept, and also propagation life was also estimated using Paris' crack propagation law. Residual stress effect on propagation life was considered in calculating propagation life, as was done with thermo-elasto-plastic FE analysis and residual stress intensity factor calculation. Fatigue life of similar kinds of welded joint could be predicted with this unified S-N curve and fracture mechanical analysis technique.