• The Transactions of the Korean Institute of Power Electronics
• /
• v.4 no.4
• /
• pp.349-356
• /
• 1999

This paper presents an instantaneous voltage control scheme of au킹liary power supply system for the electric railway v vehicles, The resonance problem of the LC filter and the existing steady state error are more serious as the use of l instantaneous voltage control techniques for the fast transient response at the nonlinear load, A filter capacitor current f feedback loop is considered to increase the damping ratio of the voltage transfer function for the suppression of the resonance problem of the LC inverter output filter. To eliminate the steady state en‘or existing in case of the AC l instantaneous voltage control. the high gain transfer function is added to the conventional PI controller. The theoretical a analysis is well described with the simulation results. The validity of the proposed schemes is well verified through the s simulation and expelimental results for the 5 kVA prototype.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.9 no.3
• /
• pp.294-302
• /
• 2004

In this study, we developed the inverter system to control Induction motor for the vertically circulation parking facility. In the case of calling a pallet, a car parking space, we basically stoned conventional system's problems, pallet is uncontrollable to the fixed position and braking system was worn by forcer braking with remaining speed. Also, by appling to converter controller, added to power regenerative control function, we confirmed the reduce of power supply capacity and the energy saving effect according to increasing operation frequency. The validity of this system is verified by 55kw induction motor driving system. Via this study, the proposed system shows the efficient use of parking facility and good operation characteristics by implementing position and speed control effectively on condition of load and shows energy saying effect by power factor control for the vertically circulation parking facility operation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.7
• /
• pp.4489-4493
• /
• 2014

LED light driving device has problems in efficiency and heating at higher than 150W. In addition, there is inconvenience in replacing the lighting device to another when W is not the same as the previous one. In this paper, a multi-channel LED light driver, driver embedded driver circuit in a multi-channel structure with a power system in the driver-interlocking structure was designed. With the auto control converter structure with a power efficiency above 93% and power factor above 0.98, the weight of the high efficiency LED lighting-actuating device in driver-interlocking structure, a driver in self-calibrating self-optimization structure. In this paper, at below 10% THD, the existing converter contrast weight was reduced by 40% or more.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.791-793
• /
• 2012

This paper describes development of the electric current pulse supply unit. This system is used to improve the problems of non-uniformed solidification structure, which is made in melting process of light weight alloy. The power supply switch of our system use MOSFET switch and gate control use PWM signal. We have simulated the designed circuit and made to PCB for the current pulse supply unit. The power circuits are simulated by a PSIM software. In the experiments, we have confirmed that the experiment results are follow the simulation results very well.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.8 no.6
• /
• pp.551-560
• /
• 2003

This paper summarizes development of a 10KW stand-alone power processing unit for 5KW SOFC-low voltage battery hybrid fuel cell power generation system. The power processing unit Includes three parts a high frequency DC-DC converter boosts low fuel cell voltage, a DC-AC inverter converts a dc voltage into a regulated ac voltage and a bidirectional DC-DC converter charges or discharges the battery. The converter topology, design, control method, and experimental result arc presented to meet the specifications such as efficiency of 90% and cost of $40/KW laid down for the "2003 Future Energy Challenge Competition" organized by the U.S. Department of Energy and IEEE. and IEEE.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.5
• /
• pp.700-706
• /
• 2012

The core technology of a starting device in the packaged power system is the pinion gear shifting device and to limit the initial starting voltage. Although the conventional products have been used the starting controller using mechanical contactor, these have a big problem such as the uncertainty for the start of starting motor after a pinion gear is completely shifted or the arc demage due to high current. In this study, in order to solve these problems, we designed and fabricated a new product to achieve the safety and reliability as follows: the pinion gear-shifting control circuits to eliminate the uncertainty of the start, the starting control system using semiconductor device to prevent the arc demage of contactor caused by high current, a start safety devices for soft starting of series motor. In addition, we obtained the electrical safety by separating the pinion gear control circuit and the source circuit of motor.

• Proceedings of the KIPE Conference
• /
• 2009.11a
• /
• pp.111-113
• /
• 2009

침몰한 잠수함 승조원의 구조용으로 사용되는 구난잠수정은 주 전원과 보조전원으로 축전지가 필수적으로 사용된다. 그러나 사용 중인 축전지 모듈이나 뱅크의 일부 셀(Cell)에 불량이 발생하면 전체 축전지 뱅크의 기능이 저하되어 구난정 시스템을 적절히 운영하지 못하여 제대로 임무를 수행하지 못하거나 커다란 손실을 가져온다. 그리고 축전지에 과 충전이나 과 방전이 발생하면 축전지가 폭발하여 화재가 발생하거나 축전지 내부 구조의 파괴로 더 이상 사용 못하는 경우가 발생한다. 따라서 이와 같이 축전지에 손상을 줄 수 있는 상황을 미연에 방지하여 축전지가 최적의 동작 상태를 유지할 수 있도록 해주고 전체 시스템의 신뢰성을 향상시키기 위하여 본 논문에서는 구조잠수정용 리튬폴리머 (Lithium Polymer) 축전지 관리장치의 개발을 수행하였다. 본 논문을 통해 축전지 관리 장치(BMS : Battery Management System)의 핵심기술인 H/W 및 S/W 설계기술, 각 Cell의 전압 제어기술, SOC(State of Charge) 제어 알고리즘 도출 및 시스템 운영 기술을 구현하였으며 개발된 알고리즘과 기능은 충 방전 부하시험과 한국 선급인증시험을 통해 유효한 방식임을 확인하였다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.16 no.4
• /
• pp.334-341
• /
• 2011

This paper presents a design and implementation of DC/DC converter with very wide input voltage ranges for EPBS whose input voltage is from 30V to 400V and output voltage is 48V. This converter is comprised of two stages that one is for control and the other is for only galvanic isolation. The proposed converter uses the hard-switched buck-boost topology for control purpose and soft-switched LLC resonant converter for isolation. The proposed converter has been verified with 300W design.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.685-688
• /
• 2006

A single-phase uninterruptible power supply system suitable for a SMES unit is proposed to achieve a simple circuit configuration and higher system reliability. It reduces the number of switching devices by applying a common-arm scheme. Operational principles to normal, stored-energy, and bypass mode are discussed in detail. Eliminating some of the switches or substituting passive components for active switches generally increases the sophistication and reduces degree of freedom in control strategy. However, the high-performance digital controller ran execute the complicated control task with no additional cost. The validity of the proposed UPS system will be verified by a computer-aided simulation.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2016.01a
• /
• pp.13-14
• /
• 2016

본 논문은 차량 컨트롤러 메인보드 개발에 있어 DC-PLC 방식으로 One-wire만으로 전원 공급 및 접지로 사용하도록 하여 센서 데이터 처리 및 구동 장치를 작동시키는 방법을 제안한다. 복잡한 배선을 피하기 위해 별도의 통신선을 설치하지 않고 기존 배선(wire)를 이용하며, 센서로부터 수집된 데이터를 처리하여 구동 장치를 작동시키는 명령을 전달하도록 설계한다. 본 논문은 제어장치에 들어가는 배선을 간단히 하고 차량 내부 상태를 점검하고 제어하는 기술을 설계하고 구현코자 한다.