• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1996년도 춘계학술발표회논문집(3)
• /
• pp.117-122
• /
• 1996

본 연구에서는 2개사에서 제조된 합금 600 및 합금 690 이음매 없는 관과 진공 유도 용해로 제조한 합금 690 판재에 대하여 부시 환경의 변화에 따른 특성 평가를 행하였다. 부식 평가는 양극 분극 시험을 통하여 행하였으며 부식 환경은 NaCl, HCl, NaOH(＋$Na_2$SO$_4$) 용액 및 Cu$^{＋}$/Cl$^{－}$ SO$_4$$^{2－}$ 용액이었다. 합금 600 및 합금 690의 양극 분극 저항성을 부식 환경에 따라 평가한 결과, 부식 용액의 종류에 따라 서로 다른 분극 거동을 보이고 있으며, 합금 690의 저항성이 합금 600의 저항성보다 우수하게 나타났다. 또한 가성 용액 중에 $Na_2$SO$_4$를 첨가할 경우 부식 속도를 가속화시키고 있다. 한편 Mo이 첨가되지 않은 합금 690M0의 경우는 Cl$^{－}$ SO$_4$$^{2－}$ 비가 증가할수록 공식 저항성이 급격히 감소하고 있으나, Mo이 첨가된 합금 690M2의 경우는 시험한 전체 비율에서 이온의 영향을 받지 않는 것으로 나타나고 있어 합금 690의 공식 저항성에 Mo이 매우 좋은 효과를 보이고 있음을 알 수 있다.

• 대한기계학회논문집B
• /
• 제27권4호
• /
• pp.496-503
• /
• 2003

An experimental study has been performed on thermal transport from an aluminum foam heat sink under a confined impinging air jet. Three kinds of aluminum foam heat sinks with 10, 20 and 40 PPI and a conventional pin-fin heat sink are tested in the present study. The jet Reynolds number is varied in the range of Re=667～5672 The effect of the confinement disk diameter and the distance between the confinement disk and the heater surface on the averaged Nusselt number is investigated in detail. The results are also compared with those of the unconfined impinging air jet. The critical distance, at which thermal performance shows a minimum compared to the unconfined jet impinging, will be described in terms of the Reynolds number and the pore density of the aluminum foam.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집B
• /
• pp.651-655
• /
• 2000

The objective of present work is to investigate experimentally the characteristics of heat transfer. A fluidized bed combustion has advantages of pollution control, fuel flexibility and excellent heat transfer. The present study investigates fundamental phenomena of bed-to-surface heat transfer in high temperature fluidized beds to improve design of immersed tube surface. The tested operating variables are bed temperature, supeficial velocity, mean size of bed material, and the rake angle of fin. Generally, heat transfer rates between the fluidized bed and immersed finned-tube are much higher than those of a smooth tube. A life time of finned-tube is generally longer than that of smooth tube.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문초록집
• /
• pp.390.1-390
• /
• 2002

In this study, we investigate the plugging effect on the CE type steam generator tube. The natural frequency and mode shape will be changed due to decrease of the effective mass distribution along the tube. We compared the variation of stability ratio for plugged tube with that fur unplugged one. The natural frequency increased because of removing the cooling water inside the steam generator tube, but the stability ratio decreased inversely because of changing the vibrational mode shape. We also investigated the turbulent excitation effect.

• 설비공학논문집
• /
• 제15권4호
• /
• pp.254-260
• /
• 2003

The boiling characteristics for R134a are studied to clarify the hysteresis at low temperature on enhanced tubes of a flooded evaporator. Initial boiling conditions, refrigerant temperature, and inlet temperature of the chilled water are considered as the key parameters of the experiments. Unlike previous studies of the boiling heat transfer with uniform heat flux and uniform wall temperature, the wall temperature was varied along the tube. In, this study, it was found that the hysteresis of the temperature overshoot (705) at the onset of nucleate boiling initially at the inlet section of the tube. It is also concluded that the abnormal operation can be avoided during the low temperature boiling if the refrigeration system is started with LMTD larger than $3.4^{\circ}C$ at initial stage and larger than $1.0^{\circ}C$ at normal stage.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 1997년도 추계학술발표회 논문집
• /
• pp.105-113
• /
• 1997

보일러 연도 배기가스 현열을 회수하여 연료가스인 BFG를 예열하기 위한 분리형 열파이프 시스템을 개발하였다. BFG 예열 시스템의 열설계를 위한 전열모델을 수립하고 설계를 위한 프로그램을 작성하였으며 3,700KW급의 실규모 설비를 제작하여 현장적용 시험을 수행하였다. 개발시스템에 대한 실조업 성능평가를 행하여 보일러 운전에 미치는 영향, 시스템 자체의 성능 및 작동특성, 운전과 유지보수성에 대한 종합적인 검토를 수행하였으며 본 시스템의 적용을 통하여 보일러의 열효율이 평균 4% 향상되는 것으로 나타났다. 실조업 평가를 통하여 본 개발 시스템이 BFG의 예열을 위한 최적의 시스템인 것으로 판단되었다.

• 제어로봇시스템학회논문지
• /
• 제9권3호
• /
• pp.236-241
• /
• 2003

This paper addresses the optimal design of dividing wall distillation column which is rapidly applied in a variety of chemical processes over recent several years because of its high energy saving efficiency. A general dividing wall column model which can cope with the heat transfer through the dividing wall is developed using rigorous computer simulation. Based on the simulation model, the effects of the internal recycle flow distribution around the dividing wall and the heat transfer across the dividing wall on overall system performance are investigated. An improved column design method is suggested to utilize the heat transfer through the wall. The suggested method is compared with the existing method via simulation study in which the proposed design shows improved energy saving result.

• 대한기계학회논문집A
• /
• 제30권3호
• /
• pp.349-355
• /
• 2006

The gas turbine components is used on high temperature conditions which under severely circumstance with start-up and stop several times. Therefore, it is used nickel-base superalloys like and GTD-111DS. Damaged buckets on the t긴ade tip during operating are repaired per 24,000 hr to three times according to repair specification of manufacture. It is applied pre-heat, HIP(hot isostatic pressing) and post-heat treatment to support welding repair on blade tip effectively. On this study, It is utilize of $WRAP^{TM}$ (welding repair advanced process) method to make tension test specimens for this study, And then, material strength and characteristic for GTD-111DS was analyzed.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2001년도 추계학술대회 논문집(Proceeding of the KOSME 2001 Autumn Annual Meeting)
• /
• pp.15-20
• /
• 2001

This study investigated the condensation heat transfer coefficients of R-22, R-290 and R-600a inside horizontal tube. Heat transfer measurements were peformed for smooth tube with outside diameter of 12.7 mm Condensation temperatures and mass velocity were ranged from 308 K to 323 K and $51kg/\textrm{m}^2s$s to $250kg/\textrm{m}^2s$, respectively. The test results showed that the local condensation heat transfer coefficients increased as the mass flux increased, and also the effects of mass velocity on heat transfer coefficients of R-290 and R-600a were less than R-22. Average condensation heat transfer coefficients of natural refrigerants were superior to that of R-22. The present results had a good agreement with Haraguchi's correlation.

• 대한기계학회논문집B
• /
• 제26권3호
• /
• pp.417-422
• /
• 2002

The experiments have been carried out to evaluate the cooling performance of a fan-aluminum foam heat sink assembly in comparison with a conventional CPU cooler. In terms of the dimensionless surface temperature of the heater, the cooling performance of the aluminum foam heat sink is similar to that of the conventional one with much reduced weight. The optimum fin height is found to be strongly dependent on the fin height of the heat sink and flow characteristics of the cooling fan.