• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.2
• /
• pp.56-61
• /
• 2010

In this paper, high efficient power amplifier with dual band has been realized. Dual band power amplifier have used modify stub matching for single FET, center frequency 2.14GHz and 5.2GHz respectively. The dual-band operation of the CRLH TL is achieved by the frequency offset and the nonlinear phase slope of the CRLH TL for the matching network of the power amplifier. Because the control of the all harmonic components is very difficult m dual-band, we have managed only the second- and third-harmonics to obtain the high efficiency with the CRLH TL in dual-band. Dual-band characteristics in the output has to balance. Two operating frequencies are chosen at 2.14 GHz and 5.2 GHz in this work. The measured results show that the output power of 28.56 dBm and 29 dBm was obtained at 2.14 GHz and 5.2 GHz, respectively. At this point, we have obtained the power-added efficiency (PAE) of 65.824 % and 69.86 % at two operation frequencies, respectively.

• Proceedings of the Korean Information Science Society Conference
• /
• 2002.04a
• /
• pp.133-135
• /
• 2002

무선 통신의 발전으로 사용자가 휴대용 장치를 사용하여, 그들의 물리적인 위치에 상관없이 통신을 할 수 있는 이동 컴퓨팅이라는 새로운 패러다임이 생겨났다. 이러한 이등 컴퓨팅은 비연결성, 낮은 대역, 높은 대역의 가변성, 이질망의 연결, 보안성, 저 전력, 적은 저장 공간 등의 제약성을 가지고 있다. 본 논문에서는 이러한 제약 중 하나인 저 전력성을 극복하기 위하여 두 노드간의 거리에 따른 전력을 다르게 하는 방식인 전력 조절 기범(Power Adaption Scheme)에 기법에 실시간성을 고려하였다. 기존의 방식에서 전력 소비를 줄이기 위해 중간에 거쳐야 할 노드의 수가 증가하는 만큼 전송 시간이 늘어나기 때문에 시간 제약을 갖는 응용에 적절하지 못하다. 본 논문에서는 실시간성을 갖는 데이터 전송에서 소비전력을 최소화하는 라우팅 기법을 제시하였고 성능을 비교하였다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.9
• /
• pp.54-58
• /
• 2011

In this paper a dual-band Class-E power amplifier using Composite Right-/Left-Handed transmission lines and PIN diode is proposed. Dual-band operation is achieved by the frequency offset and nonlinear phase slope of CRLH TL for the matching network of power amplifiers. The proposed power amplifier has been realized by using in the input and the output matching network for high power added efficiency. PIN diode has been used to obtain the dual-band of power amplifier. The measured results show that output powers of 42.17 dBm and 41.43 dBm were obtained at 800 MHz and 1900 MHz, respectively. At this frequency, we have obtained the power-added efficiency(PAE) of 67.84 % and 65.31 % in two operation frequencies, respectively.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.3 s.333
• /
• pp.9-14
• /
• 2005

OFDM(Orthogonal Frequency Division Multiplexing) is widely used in wideband wireless communication systems due to its excellent performance. However, OFDM has a disadvantage of high peak-to-average power ratio and SC-FDE(Single-Carrier with Frequency-Domain Equalization) was introduced to overcome the drawback. SC-FDE is less sensitive to nonlinear power amplifiers than OFDM while its complexity and performance is comparable. This paper proposes a frequency diversity technique for single-antenna BPSK SC-FDE systems using repeated QPSK transmissions with rearranged transmission patterns.

• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.487-488
• /
• 2017

본 논문에서는 급전 코일과 집전 코일 간 공극 변화에도 일정한 공진 특성을 가지는 무선 전력 전송 시스템을 제안한다. 공진회로가 적용된 시스템의 회로특성은 인덕턴스나 커패시턴스와 같은 파라미터 값에 크게 의존하는데, 일정한 공진 특성을 가지기 위해서는 공극의 변화에도 일정한 인덕턴스가 유지되어야 한다. 제안하는 무선 전력 시스템은 공극이 감소할 때 페라이트 코어에 의해 인덕턴스가 증가하고 알루미늄 판에 의해 인덕턴스가 감소하는 상보적인 특성을 결합하여 공극변화에도 인덕턴스가 일정하게 유지되게 한다. 페라이트 코어와 알루미늄 판에 위치한 각 코일들의 기자력 비율을 조절할 경우 공극이 7 cm 에서 15 cm 까지 변하더라도 급 집전부의 자기 인덕턴스 변화는 ${\pm}1%$ 이내로 일정하게 유지되는 것을 확인하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.4
• /
• pp.821-828
• /
• 2012

In this paper, we report that the differences between RF power levels can be improved in wavelength division multiplexing - radio over fiber (WDM-RoF) system by using a photonic crystal fiber. In a WDM-RoF system, each WDM channel experiences different received RF power level fluctuation in remote node (RN) because of wavelength-dependent dispersion. Since each WDM channel experiences different power fluctuation, the RF power fluctuation acts as a design constraint in viewpoint of network design. We designed a photonic crystal fiber to improve the effect of wavelength- dependent dispersion on RF power fluctuation. Also, we analyzed the wavelength-dependent difference of inter-channel RF power fluctuations.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.4
• /
• pp.576-585
• /
• 2001

In this paper, we investigated the method of compensation for optical pulse shape distortion due to both chromatic dispersion and SPM(self phase modulation) in a single mode fiber We selected MSSI(mid-span spectral inversion) as compensation method using OPC(optical phase conjugator). We used EOP(eye-opening penalty) parameter in order to evaluate the efficiency of waveform distortion compensation. In this paper, we induced optimum pump power level in optical phase conjugator through analytic method of computer simulation. And we investigated input signal power range being able to maintain stable reception performance under the condition of optimum pump power. We verified the possibility of high performance optical transmission system realization through the inducement and application of optimum pump power, input signal power and in-line amplifier spacing, because power control is important in the compensation for optical pulse distortion.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.10
• /
• pp.117-124
• /
• 2017

A Smart Grid is a system that can efficiently use energy by exchanging real-time information in both directions between a consumer and a power supplier using ICT technology on an existing power network. DR(Demand response) is an arrangement in which electricity users can sell the electricity they save to the electricity market when the price of electricity is high or the power system is crisis. In this study, we developed a power meter data transmission device and power IT system that measure the demand information in real-time using a smart meter and transmit it to a cloud server. The power meter data transmission device developed in this study uses alight sensor connected to a Raspberry Pi 3 to measure the number of blinking lamps on the KEPCO meter per unit of power, in order to provide reliable data without any measurement errors with respect to the KEPCO power data. The power measurement data transmission device uses the standard communication protocol, OpenADR 2.0b. The measured data is transmitted to the power IT system, which consists of the VEN, VTN, and calculation program, via the LTE WiFi communication network and stored in its MySQL DB. The developed power measurement data transmission device issues a power supply instruction and performs a peak reduction DR when a power system crisis occurs. The developed power meter data transmission device has the advantage of allowing the user to adjust it every 1 minute, where as the existing smart metering time is fixed at once every 15 minutes.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.3
• /
• pp.326-332
• /
• 2019

Recently, the deep learning technology has gained lots of attention which leads to its application to various fields. Especially, there are recent attempts to overcome the limit of wireless communications systems through the use of the deep learning. In this paper, we have verified the performance of deep learning based transmit power control scheme. Unlike previous transmit power control schemes where the optimal transmit power is derived by solving the optimization problem explicitly, in the deep learning based transmit power control, the general solver for the optimization problem is derived through the deep neural network (DNN). Especially, by using the spectral efficiency as the loss function of DNN, the training can be performed without needing labels. Through simulation based on Tensorflow, we confirm that the transmit power control based on deep learning can achieve the optimal performance while reducing the computational complexity by 1/200.

• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.623-624
• /
• 2012

공진기 공진주파수와 인버터 스위칭 주파수를 최적화하는 이론에 대해 설명한다. 제안된 방법론을 이용하여 1차측 끼리 혹은 2차측 끼리 자기적으로 결합된 경우의 주파수 조절에 대해 설명한다.