• Convergence Security Journal
• /
• v.5 no.1
• /
• pp.85-92
• /
• 2005

For an efficient role based access control in highly distributed computing environment to reduce management cost, we utilize attribute certificates. Especially highly distributed computing environments such as ubiquitous computing environments which cannot have global or broad control, need another attribute certificate management technique. The techniques for transmission of the attribute certificates and management of the group keys should be considered to reduce management cost. For better performance we structure attribute certificates. We group roles and make the role group relation tree. It results secure and efficient role renewing and distribution. For scalable attribute certificate distribution, multicasting packets are used. We take into account the packet loss and quantifying performance enhancements of structuring attribute certificates.

• Proceedings of the KIEE Conference
• /
• 1999.07g
• /
• pp.3172-3174
• /
• 1999

교환기나 전송장치 등 각종 통신설비에 전원을 공급하기 위해서 정류기, 축전지 및 발전기 등의 전원설비가 사용되고 있다. 이들 중에서도 정류기는 통신설비에 직류전원을 공급하기 때문에 다른 전원설비 보 다도 신뢰성 및 안정성이 확보된 장치로 인식되어 왔다. 그러나 현재 사내전화국에 설치 운용중인 정류기는 교환 기별로 종류가 다양하여 유지보수에 어려움이 내재하고 있을 뿐만 아니라 통신망의 광대역화, 대용량화에 대처가 곤란하며 정류기를 전력실 또는 통신실에 집중해서 설치 운용하는 집중공급방식으로는 축전지의 만충전이 곤란하다. 또한 현재의 이러한 급전방식은 통신장치의 광대역화, 고도화 등 통신망의 급격한 발전과 함께 다음과 같은 문제점이 대두되고 있다. 첫째, 전력실에서 총괄하여 교류전력을 직류48V로 변환해서 급전하기 때문에 급전전류가 크게되고, 또한 전력실에서 통신실까지의 급전손실이 크다 둘째, 통신설비의 증감에 따른 전원설비의 증감이 어렵기 때문에 설비 가동율이 나쁘다 셋째, 전원설비의 고장에 의한 전화국 전체설비에 심각한 영향을 미칠수 있다 이러한 문제점을 해소하기 위하여 집중 및 분산급전방식으로 운용이 가능하며, 또한 모든 전원설비를 감시/제어하는 전원 집중관리 시스템과의 인터페이스 등이 가능한 정류시스템을 1997년부터 개발하였다. 본고에서는 신형 정류기와 기존의 정류기와의 성능 및 특성에 대해 비교하였고, 특히 경제성측면과 설치상련에 대해 비교분석 하였다. 또한 집중급전방식과 분산급전방식의 특성에 대해서도 서술하였다.

• Journal of IKEEE
• /
• v.22 no.4
• /
• pp.1147-1151
• /
• 2018

As personal users create and share lots of contents at any time and any places, new networking architecture such as content centric networking (CCN) has emerged. CCN utilizes content name as a packet identifier, not address. However, current CCN has a limitation for content source mobility management. The movement of content sources cause long delivery latency and long service disruption. To solve that, a hierarchical mobility management was was proposed. However, the hierarchical mobility management scheme has still the loss of interest packets and long handoff latency. So, this paper presents the hybrid hierarchical mobility management in mobile CCN environements to reduce both the loss rate of interest packets and the handoff latency. It is shown from the performance evaluations shows that the proposed scheme provides low loss rate of control message.

• Journal of KIISE:Computing Practices and Letters
• /
• v.13 no.5
• /
• pp.260-270
• /
• 2007

Owing to the improved wireless communication technologies, it is possible to provide streaming service of multimedia with PDAs and mobile phones in addition to desktop PCs. Since mobile client devices have low computing power and low network bandwidth due to wireless network, the transcoding technology to adapt media for mobile client devices considering their characteristics is necessary. However, since mobile clients use wireless network and the wireless network have less stable bandwidth according to distance from AP and environments, it is hard to support stable QoS to mobile clients. In this paper, we propose a dynamic bit rate control method for transcoding in order to supprot stable QoS of streaming media service to mobile clients via wireless network. The proposed method is shown to serve seamless streaming media service with adaptive bit rate control according to state of wireless network in real time and to reduce transmission failure from experiment.

• Korean Journal of Optics and Photonics
• /
• v.20 no.3
• /
• pp.143-147
• /
• 2009

We propose an asymmetrical 2.5 Gbps / 622 Mbps bidirectional optical subscriber network with Manchester coded downstream and NRZ (Non-Return-to-Zero) upstream remodulation. The proposed system has important characteristics in the optical network unit (ONU): it does not require a light source or the usual control circuits such as wavelength control and output power control, and it is possible to use a synchronization scheme between upstream and downstream data. We theoretically analyze BER(Bit Error Rate) performance of upstream data remodulated with Manchester coded downstream according to the types of NRZ downstream data and perform simulations with MATLAB. The BER performance and the receiver sensitivity have been improved by 3 dB by adjusting threshold levels compared to the conventional receiver. The results have shown the remodulation scheme with Manchester coded downstream could be a useful technology for asynchronous and asymmetric optical subscriber networks with low cost and simple structures.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.9
• /
• pp.912-918
• /
• 2011

In this paper, a composite right-/left-handed(CRLH) rectangular waveguide satisfying a balanced condition above the cut-off frequency is presented. The proposed structure consists of one shorted stub and two twisted H-plane irises which produce an effectively negative permeability and permittivity, respectively. The CRLH structure can independently control the series and shunt resonance frequencies of a CRLH transmission line which determine the left-handed(LH) and right-handed(RH) bands due to a minimized coupling between a shorted stub and twisted H-plane irises. Thus, the design of the CRLH waveguide satisfying a balanced condition is possible. To analyze the CRLH structure, a crossly connected equivalent circuit is derived. The simulated and measured results confirm that the proposed CRLH waveguide has a transmission property without a band gap among the LH and RH bands.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.4C
• /
• pp.338-346
• /
• 2012

Wireless sensor network (WSN) technology provides a variety of medical and healthcare solutions to assist detection and communication of body conditions. However, data reliability inside WSN might be influenced to healthcare routing protocol due to limited hardware resources of computer, storage, and communication bandwidth. For this reason, we have conducted various wireless communication experiments between nodes using parameters such as RF strength, battery status, and deployment status to get a optimal performance of mobile healthcare routing protocol. This experiment may also extend the life time of the nodes. Performance analysis is done to obtain some important parameters in terms of distance and reception rate between the nodes. Our experiment results show optimal distance between nodes according to battery status and RF strength, or deployment status and RF strength. The packet reception rate according to deployment status and RF strength of nodes was also checked. Based on this performance evaluation, the optimized sensor node battery and deployment in the developed our mobile healthcare routing protocol were proposed.

• Journal of KIISE:Information Networking
• /
• v.30 no.4
• /
• pp.520-534
• /
• 2003

In this paper, a performance evaluation model of the Fat-tree Network with the multiple-buffered crossbar switches is proposed and examined. Buffered switch technique is well known to solve the data collision problem of the switch network. The proposed evaluation model is developed by investigating the transfer patterns of data packets in a switch with output-buffers. Two important parameters of the network performance, throughput and delay, are then evaluated. The proposed model takes simple and primitive switch networks, i.e., no flow control and drop packet, to demonstrate analysis procedures clearly. It, however, can not only be applied to any other complicate modern switch networks that have intelligent flow control but also estimate the performance of any size networks with multiple-buffered switches. To validate the proposed analysis model, the simulation is carried out on the various sizes of Fat-tree networks that uses the multiple buffered crossbar switches. Less than 2% differences between analysis and simulation results are observed.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.1
• /
• pp.224-236
• /
• 1997

In order to control the flow of traffic in ATM networks and optimize the usage of network resources, an appropriate control mechanism is necessary to cope with congestion or prevent degradation of network performance caused by congestion. While the conventional UPC algorithm provides only unstable preventive function unrelated with the state of networks and is unable to recover congestion, the proposed adaptive UPC algorithm supervises the situation of ATM networks using the information from OAM cell. Then the monitor of the proposed adaptive UPC algorithm controls leaky rate and buffer threshold value according to QOS. Therefore, the proposed algorithm can cope with congestion as well as prevent and react sensitively to buffer delay. In proportion to the diversity of traffic and the increase of transmission rate in networks, the adaptive UPC-BT algorithm proposed in this paper can be effectively used in ATM networks with wide applications. This paper shows that the proposed algorithm efficiently uses in ATM networks with application. This paper shows that the proposed algorithm efficiently use network resources and provides QOS to users for various kinds of traffics by comparing with conventional UPC algorithms.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.6
• /
• pp.124-131
• /
• 2014

This paper describes a design of an adaptive baseband modem based on TDMA(time division multiple access) with a relay protocol function for wireless personal area networks. The designed baseband modem is controlled by a master synchronization signal and can be configured a relay network up to 14 hops. For efficient data relay communications, the internal buffer design is optimized by implementing a priority memory bus controller to a single port memory. And the priority memory bus controller is also designed to minimize the number of synthesized logic gates. To implement the synchronization function of the narrowband TDMA relay communication, the number of gates has been reduced by dividing the frame synchronization circuits and the network slot synchronization circuits. By using these methods, the number of gates are used about 37%(34,000 gates) on Xilinx FPGA XC6SLX9 which has 90,000 gates. For the 1024-bit frame size with a 32-bit synchronization word, the communication reception rate is 96.4%. The measured maximum transmission delay of the designed baseband modem is 230.4 msec for the 14-hop relay communication.