Physicochemical properties of hydroxypropylated and cross-linked (HPCL) rice starch were investigated. Dual modification of rice starch was carried out by hydroxypropylation using propylene oxide (2, 6, and 12%) and then crosslinking using phosphorus oxychloride (0.005% and 0.02%). Swelling power of dual-modified rice starch increased at lower temperature (60$^{\circ}C$) than that of native rice starch (70$^{\circ}C$). HPCL rice starch showed slightly lower solubility (1.6-6.1%) than native rice starch (2.2-13.8%). Solubility and swelling power tended to gradually increase with increasing phosphorus oxychloride contents. RVA pasting temperature (66.2-70.8$^{\circ}C$) and peak viscosity (160.6- 171.1 RVU) of HPCL rice starch were lower than that of those of native starch (71.3$^{\circ}C$, 190.4 RVU) and decreased with increasing propylene oxide concentration. DSC thermal transitions of HPCL rice starches shifted to lower temperature and show less amylopectin melting enthalpy (11.8-9.8 J/g) than that of native rice starch (11.9 J/g). Overall, physicohemical properties of HPCL rice starches were highly dependent on hydroxypropylation rather than crosslinking.
To obtain information on the accumulation of (1-3, 1-4)-$\beta$-glucans during kernel maturation, (1-3, 1-4)-$\beta$-glucan contents and (1-3, 1-4)-$\beta$-glucanase activities were determined in developing kernels of the two Korean cooking barley varieties, Neulssalbori and Saessalbori. (1-3, 1-4)-$\beta$-Glucan contents in kernels at 5 and 10 days after anthesis(DAA) were very low and the contents increased rapidly in kernels at 15 to 25 DAA. (1-3, 1-4)-$\beta$-Glucan content in kernels at harvest was about 3.5 to 4% of kernel dry matter. (1-3, 1-4)-$\beta$-Glucanase activities were relatively higher in younger kernels but the levels of the activity were very low compared with those in germinating kernels. A significant negative correlation was observed between (1-3, 1-4)-$\beta$-glucan contents and (1-3, 1-4)-$\beta$-glucanase activities. Low levels of (1-3, 1-4)-$\beta$-glucanase activites in kernels at 15 to 30 DAA, however, may indicate that (1-3, 1-4)-$\beta$-glucanases have little effect on the final content of (1-3, 1-4)-$\beta$-glucans in barley kernels. Starch contents and $\alpha$-amylase activities were also determined in developing barley kernels. Starch contents increased rapidly as kernels matured and the content at harvest was about 60% of kernel dry matter. Relativley higher levels of $\alpha$-amylase activities in kernels at the earlier developmental stage decreased rapidly as kernels matured.
This study was carried out to investigate heterosis in photosynthetic characteristics and yield of F$_1$ hybrid rice using genetic cytoplasmic male sterile lines. Two F$_1$ hybrid rices, HR7028A/Yongmoonbyeo and IR54756A/Yongmoonbyeo, showed heterobeltiosis in dry weight and leaf area at the heading date and at the 20 day after heading. HR7028A/Yongmoonbyeo showed heterobeltiosis and IR54756A/Yongmoonbyeo showed heterosis in chlorophyll content and RuDPCase activity in flag leaf, T-sugar and starch content in stem, and $CO_2$ fixation at the 20 day after heading as well as at the heading date. HR7028A/Yongmoonbyeo showed heterobeltiosis in number of panicles and grains per panicle, and IR54756A/Yongmoonbyeo had heterobeltiosis in number of panicles per plant. As results, heterobeltiosis of HR7028A/Yongmoonbyeo in yield was 11% and that of IR54756A/Yongmoonbyeo was 4%.
This study investigated the effects of the mixing ratio of tofu paste and normal corn starch on the characteristics of gluten-free (GF) muffins. Soft wheat flour for wheat flour-based muffins (control) was replaced with the mixture of tofu paste and normal corn starch (NCS). The mixing ratios of tofu paste and NCS were 1:6.4 (S100), 1:5.1 (S80), 1:3.8 (S60), 1:2.6 (S40), 1:1.3 (S20), and 1:0 (S00), based on their total solid contents. GF muffins of S40-S100 developed the porous, sponge-like structure without crumb collapse. The weight and baking loss did not significantly differ in the control and GF muffins. By decreasing NCS in GF muffin batters, the moisture content, firmness, and crumb redness/yellowness of GF muffins increased, while their volume, specific volume, and crumb lightness decreased. Nevertheless, these characteristics (except for firmness) of S100 were much closer to those of the control. In the preference test, however, S60 (possessing lower attributes than S100 and S80) was most favored among GF muffins, and was very similar in all evaluations (except for appearance) to the control. Overall, the mixture of tofu paste and NCS would be a potential material to replace soft wheat flour in muffins.
Kim, Hee-Soo;Yang, Han-Seung;Kim, Hyun-Joong;Lee, Young-Kyu;Park, Hee-Jun
Journal of the Korean Wood Science and Technology
/
v.32
no.5
/
pp.29-38
/
2004
In this study, we investigated the thermal properties of corn-starch filled polybutylene succinate-adipate (PBS-AD) bio-composites. Thermal analysis (TA) is used to describe the analytical method for measuring the chemical property and weight loss of composite materials as a function of temperature. The thermal stability of corn-starch was lower than that of pure PBS-AD. As corn-starch loading increased, the thermal stability and degradation temperature of the bio-composites decreased and the ash content increased. It can be seen that the degree of compatibility and interfacial adhesion of the bio-composites decreased because of the increasing mixing ratio of the corn-starch. As the content of corn-starch increased, there was no significant change in the glass transition temperature (Tg) and the melting temperature (Tm) for the bio-composites. The storage modulus (E') and loss modulus (E") of the corn-starch flour filled PBS-AD bio-composites were higher than those of PBS-AD, because of the incorporation of corn-starch increased the stiffness of the bio-composites. At higher temperatures, the decreased storage modulus (E') of bio-composites was due to the increased polymer chain mobility of the matrix polymer. From these results, we can expect that corn-starch has potential as a reinforcing filler for bio-composites. Furthermore, we recommend using a coupling agent to improve the interfacial adhesion between corn-starch and biodegradable polymer.
We investigated out the effect of cultivation region on the physicochemical characteristics of starch in six sweetpotato cultivars. The following sweetpotato cultivars were analyzed: Daeyumi, Shingeonmi, Jinhongmi, Shinyulmi, Yulmi, and Yeonhwangmi. Samples were cultivated in Muan, Iksan, Nonsan, Boryeong and Hamyang. The soil texture was found to be sandy loam in Muan, Iksan, and Boryeong, sandy clay loam in Nonsan, and loam in Hamyang. The starch content of the sweetpotato was higher in Muan than in Hamyang. The amylose content was 22.3-30.9%, and the highest amylose content was found in samples from Iksan. Rapid viscosity analysis showed that the samples from Hamyang had the lowest values of pasting temperature, while samples of the Daeyumi cultivar had the highest values. Thermal analysis with a differential scanning calorimeter showed that the Muan samples had the highest values of onset temperature, maximum peak temperature, and completion temperature, and the samples from Hamyang had the lowest values. There was no difference between the cultivation regions or the cultivar in the X-ray pattern of the starch or its appearance in scanning electron micrographs. Therefore, the results of this study confirm that cultivation region and cultivar play an important role in determining the quality of sweetpotato and the physicochemical characteristics of sweetpotato starch.
Kim, Chong-Tai;Kim, Dong-Chul;Kim, Chul-Jin;Kim, Hae-Sung
Korean Journal of Food Science and Technology
/
v.23
no.2
/
pp.235-240
/
1991
Starch phosphates were prepared from the corn starch mixed with 2% sodium tripolyphosphate by twin-screw extruder with a feed rate of 20 kg/hr and an extrusion temperature of $130^{\circ}C$, and the effects of extrusion variables on the physicochemical properties (target parameters) of starch phosphates were investigated. Interrelations of system parameters (specific mechanical energy and extrudate moisture) and rheological properities of starch was analyzed by using the response surface analysis. Degree of substitution (DS) was increased with increasing the feed moisture, and showed the maximum value at the screw of near 250 rpm, Degree of gelatinization was proportionally increased with increasing the screw speed and decreasing the feed moisture. Apparent viscosity of the paste was increased with increasing the feed moisture, but it was not significantly affected by the screw speed. It was found by scanning electron microscopy that the starch microgranules were much more degradaded, and as consequent result, the intrinsic viscosity was decreased, whereas, water solubility index was increased. The rate of retrogradation of the gels was retarded with increasing DS and decreasing viscosity.
physicochemical properties of rice starch isolated from eight varieties were examined to evaluate the rice processing suitability The amylose contents of rice starch were varied with 16.7-29.7%, and IR 30, Godael, Aguja and Lengkwang varieties showed higher amylose content than the other varieties. The water binding capacity and blue value were in the range of 87.0 103.0 and 0.178-0.305, respectively. As the amylose content increased, the amylogram pasting temperature and the break down ratio increased, while the peak viscosity did not show any significant difference. The transmittance of 0.1% starch suspension slowly increased at $50^{\circ}C$ in the low-amylose content rice group, and rapidly increased at $65^{\circ}C$ in the high-amylose content rice group, but there were no differences above $75^{\circ}C$ among varieties. Also the low-amylose rice starch showed higher values in the swelling power and solubility. The hardness of the 30% rice starch gels was low in low-amylose one. During storage at $20^{\circ}C$ for 14 days, the increment of hardness was more slow in high-amylose one. The retrogradation velocity constant of rice starch gel by Avrami equation was the highest as 0.219 in Aguja variety.
The changes in molecular size distribution of rice starch during extrusion cooking and simple heating of rice flour were compared and the effect of subsequent enzyme treatment on the molecular size was examined. A single-screw extruder was used with varing feed moisture contents ($17{\sim}29%$) and barrel temperatures ($100{\sim}150^{\circ}C$). An aluminium capsule immersed in oil bath ($100{\sim}200^{\circ}C$) was used for the simple heat treatment of rice flour. In case of extrusion cooking the mechanical energy input varied sharply at around 23% moisture content of the feed. At the feed moisture content of $17{\sim}23%$, a significant molecular size reduction of rice starch was observed by the gel permeation chromatography using Sephacryl S-1000 gel. The intact starch molecules of above $4{\times}10^{7}$ dalton were largely disintergrated by extrusion cooking of rice flour containing the moisture content less than 23%. It was mostly degraded further into the molecules having below $5{\times}10^{6}$ dalton by ${\alpha}-amylase$ treatment. But at the feed moisture content above 26% the starch did not show molecular size reduction either by extrusion cooking or by subsequent enzyme treatment. On the contrary little changes in molecular size of starch was occured by simple heating of rice flour containing the moisture less than 20%. but slight size reduction was observed at the moisture content above 23%, where the effect of ${\alpha}-amylase$ was also observed.
Kim, Jeong-Ok;Choi, Cha-Ran;Shin, Mal-Shick;Kim, Sung-Kon;Lee, Sang-Kyu;Kim, Wang-Soo
Korean Journal of Food Science and Technology
/
v.28
no.3
/
pp.552-557
/
1996
Gels of rice starches isolated from jinmibyeo, llpoombyeo and Dongjinbyeo were prepared with $60{\sim}65%$ water content (based on the total weight) and stored at $-18^{\circ}C,\;4^{\circ}C,\;20^{\circ}C,\;30^{\circ}C,\;and\;37^{\circ}C$ for 6 days. The effects of varieties, water content and storage temperature on the degree of retrogradation (DR) of gels were measured by ${\alpha}$-amylase-iodine method. DRs of rice starch gels increased rapidly during the initial stage of storage, but slowly after that. DRs were highest with 60% water content and lowest with 65% water content at any storage temperature. Regarding the storage temperature, DRs of gels increased in the following order : $4^{\circ}C>20^{\circ}C>30^{\circ}C>37^{\circ}C>-18^{\circ}C>$. As the storage temperature was increased, DR per $10^{\circ}C$ increased above refrigerated temperature decreased in the following order : jinmibyeo>llpoombyeo>Dongjinbyeo.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.