• Journal of Navigation and Port Research
• /
• v.34 no.5
• /
• pp.319-324
• /
• 2010

For the purpose of technological analysis in the marine accidents and their prevention, IMO have made it obligatory to load VDR which is similar to the black box in aircraft. However, in case of body sinkage, capsizing, stranding and plunging which are almost 10% of marine accidents, it is difficult to take out the necessary data from the VDR in order to analyze the cause of them. Therefore, this paper apply the navigation dangerousness evaluation technology to the VDR to improve its performance. And we suggest that the vertical acceleration which is one of the factors for evaluating seakeeping performance of a ship is to be added in the existing VDR record data recommended by IMO.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.1
• /
• pp.22-30
• /
• 2020

In March 2016, a 6.67-ton fishing boat capsized owing to the loss of stability during crane operations. Capsizing occurs when a boat or ship is flipped over (or turned upside down) for reason other than accidents caused by collisions, contact, stranding, fire or explosion. Over the past nine years (2010-2018), capsize accidents have accounted for 2.34 % of all marine accidents and are gradually increasing. The loss of stability from improper shipping is the main cause of most capsizes, especially for small fishing vessels weighing 10 tons. According to the Fishing Vessel Act, small fishing vessels weighing less than a ton are exempted from inspections on stability and load cranes. This study analyzes the issue cited as the reason for the capsizing of the small fishing boat in Goseong, namely, the reduction of restoring moment due to increased weight of the crane. Fishing boats with similar loading conditions were modeled on the basis of re-determination, and their stability before and after the accident was assumed. The fishing boats with heavier cranes were found to be at higher risk of capsizing owing to the reduction of the restoring moment and the angle of deck immersion. Under standard loading conditions, the stability moments of fishing vessels are lesser during fishing, compared to when they depart from or arrive at the port.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2010.04a
• /
• pp.331-333
• /
• 2010

동해지방해양안전심판원 관할구역에서 최근 7년간 발생한 해양사고 중, 어선 선원의 실종 및 사망자는 총 67명이며, 그 중 혼자 승선하여 조업하는 총톤수 5톤 미만의 소형어선에서 발생한 실종 및 사망자는 28명 (4명/년)으로 전체 인명사고의 42%를 차지하고 있으며 총톤수 5톤 미망의 선박은 "선박직원법"의 적용을 받지 않으며 어업을 목적으로 하는 총톤수 5톤 미만의 소형어선의 경우, 선원 혼자 승선하여 조업하는 어선이 대부분인 상황이다. 또한 소형어선은 법정 무선설비를 설치할 의무가 없어 해양사고 즉, 충돌, 침몰, 전복, 실족, 기타 안전사고 등이 발생할 경우 목격자가 없는 경우 구조요청에 큰 어려움이 따르며 이는 곧 인명사고와 직결된다고 볼 수 있다. 따라서 우리원 사고 사례를 중심으로 이러한 인명사고를 최소화 할 수 있는 방안을 제시하고자 함.

• Journal of Korea Ship Safrty Technology Authority
• /
• s.22
• /
• pp.19-33
• /
• 2007

According to amendments of ship safety act which comes into force from 4 Nov. 2007, the amended stability criteria should be applied to the small vessels of 12m or more in length. In this paper, the dimensions of domestic small vessels and the casualty reports of capsizing accidents are analyzed. And 58 ships are sampled, modeled for the investigation of the stability performance. Based on the regression analysis of the model ship's allowable metacentric-heights under several stability requirements, stability criteria for small fishing vessels and cargo ships are proposed.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2010.04a
• /
• pp.413-414
• /
• 2010

For the purpose of technological analysis in the marine accidents and their prevention, IMO have made it obligatory to load VDR which is similar to the black box in aircraft. However, in case of body sinkage, capsizing, stranding and plunging which are almost 10% of marine accidents, it is difficult to take out the necessary data from the VDR in order to analyze the cause of them. Therefore, this paper apply the navigation dangerousness evaluation technology to the VDR to improve its performance. And we suggest that the vertical acceleration which is one of the factors for evaluating seakeeping performance of a ship is to be added in the existing VDR record data recommended by IMQ.

• Journal of the Society of Naval Architects of Korea
• /
• v.37 no.1
• /
• pp.50-59
• /
• 2000

This paper presents a brief outline of dynamic stability of a damaged ship at final stage of flooding in rough beam wind and waves. One degree-of-freedom, roll equation is adopted with effects of flooding water and external forces due to wind and waves, but without effect of sloshing. We discuss the dynamic stability of the damaged ship in terms of capsizing probability based on risk analysis, the method of which was firstly proposed by Umeda et al.[6] to high speed craft in intact condition. As a result, we can evaluate the dynamic stability of the damaged ship in probabilistic manner according to sea state, operating condition and damage situation.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.103-103
• /
• 2012

크루즈 페리 선박의 인테리어 섬유 내장부품은 고도의 난연성과 내구성, 그리고 높은 수준의 감성과 심미적 기능을 만족하는 고기능성 소재로 구성된 섬유 복합체이다. 이는 화재, 전복 등 돌발 사고에 대하여 탑승자를 보호하고, 쾌적한 실내 분위기를 제공함으로서 안전운행을 유도하며, 높은 수준의 감성과 심미적 기능을 부여함으로서 품위와 가치를 증가시키는 기능이 있다. 난연기능이 부가된 난연사의 경우 복합가공 즉, 방오, 항균, 소취 기능을 추가 부여하게 되면 난연 기능이 급격히 저하되는 결정적인 단점이 있다. 이로 인해 가혹한 난연 성능이 요구되는 선박용 인테리어 섬유제품의 경우 그 규격을 만족하기란 쉽지 않기 때문에 원사제조에서부터 염색공정, 가공공정에 걸쳐 각 단위 공정별로 복합적으로 난연, 방오, 항균소취 기능들의 추가 보완이 필요한 실정이다. 또한 최근 사용자 입장에서는 용도에 따라 여러 가지 기능이 복합된 원단을 요구하는 사례가 많아지고 있는 실정이며, 많은 후가공 공정시 난연가공과 더불어 복합적으로 추가 가공시 난연성 저하 등의 문제가 있다. 본 연구에서는 선박용 인테리어 섬유제품의 Spec.을 만족시키기 위해 난연 직물의 염색 후가공에 적용되는 염조제 성능을 조사하고 고견뢰 및 균염을 만족하는 난연 내광 등의 복합기능성을 확보하기 위한 기초기술을 검토하였다.

• Journal of the Society of Naval Architects of Korea
• /
• v.59 no.1
• /
• pp.9-17
• /
• 2022

In this paper, wind load on a semi-submersible rig was investigated using Computational Fluid Dynamics (CFD). A maritime atmospheric boundary layer model for wind profile was implemented such that the wind profile shapes were retained throughout the computational domain. Wind load on the semi-submersible rig was calculated under the maritime atmospheric boundary layer and matched well with the results from wind tunnel test within a ±20% error. Overturning moments with variation of draft were investigated by decomposing into drag and lift components. It was observed that the contribution from lift to the overturning moments increased as the draft got higher. The majority of the lift components originated from deckbox which served as a lifting body due to the accelerated streamlines between waterline and the bottom of the deckbox.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.1 no.1
• /
• pp.27-38
• /
• 1995

In this paper, a program for the calculation of GZ curve for a ship in waves is developed and GZ curves for a ferry in the still water and in waves are calculated. And the added mass, damping, restoring forces and wave exciting forces are calculated by using the strip theory given by Salvesen, Tuck, Faltinsen. Capsizing simulations are perfoned in consideration if the nonlinear restoring forces of the ship in waves by using the Runge-Kutta 4-th method.

• The KSFM Journal of Fluid Machinery
• /
• v.16 no.2
• /
• pp.42-47
• /
• 2013

Ship stability prediction is very complex in reality. In this paper, risk based approach is applied to predict the probability of a certified ship, which is effected by the forces of sea especially the wave loading. Safety assessment and risk analysis process are also applied for the probabilistic prediction of ship stability. The survival probability of ships encountering with different waves at sea is calculated by the existed statistics data and risk based models. Finally, ship capsizing probability is calculated according to single degree of freedom(SDF) rolling differential equation and basin erosion theory of nonlinear dynamics. Calculation results show that the survival probabilities of ship excited by the forces of the seas, especially in the beam seas status, can be predicted by the risk based method.