• Journal of the Korean Orthopaedic Association
• /
• v.54 no.3
• /
• pp.244-253
• /
• 2019

Purpose: Total hip arthroplasty was performed using a direct anterior approach (DAA) on an ordinary operation table and a short femoral stem. The clinical radiographic results were evaluated by a comparison with those performed using the modified hardinge (anterolateral approach, ALA) method. Materials and Methods: From January 2013 to November 2015, 102 patients who underwent total hip arthroplasty using DAA (DAA group) and the same number of patients using ALA (ALA group), both performed by a single surgeon, were compared and analyzed retrospectively. The operation time and amounts of bleeding were compared, and the improvement in post-operative pain, ambulatory capacity and functional recovery of the hip joint were checked. The location of insertion of the acetabular cup and femoral stem were evaluated radiologically, and the complications that occurred in the two groups were investigated. Results: The amount of bleeding was significantly smaller in the DAA group (p=0.018). Up to 3 weeks postoperatively, recovery of hip muscle strength was significantly higher in the DAA group (flexion/extension strength p=0.023, abduction strength p=0.031). The Harris hip score was significantly better in the DAA group for up to 3 months (p<0.001) and the Koval score showed significantly better results in the DAA group up to 6 weeks (p≤0.001). The visual analogue scale score improvement was significantly higher in the DAA group by day 7 (p=0.035). The inclination angle (p<0.001) and anteversion angle (p<0.001) of the acetabular cup were located in the safe zone of the DAA group more than in the ALA group, and there was no statistically significant difference in the position of the femur stem and leg length difference. During surgery, two cases of greater trochanter fracture occurred in the DAA group (p=0.155). Conclusion: The DAA performed in the ordinary operation table using a short femoral stem showed post-operative early functional recovery. Because a simple to use fluoroscope was used during surgery with an anatomical position familiar to the surgeon, it is considered to be useful for the insertion of implants into the desired position and for an approach that is useful for the prevention of leg length differences.

• Clinics in Shoulder and Elbow
• /
• v.13 no.2
• /
• pp.293-298
• /
• 2010

Purpose: Since an injured elbow joint can disturb the activity of daily life by limiting motion, especially if the motion is restricted over 40 degree of flexion contracture and under 105 degree of further flexion, it is imperative to select the best method and the timing of treatment of the elbow stiffness. Therefore this review will discuss open surgical techniques for stiff elbows based on the literature. Materials and Methods: It is important to take sufficient clinical examination of the patient, including history taking. And, a surgeon should select appropriate procedure after accurately understanding about the status and cause of the stiff elbow with radiographic methods. Surgical methods include arthroscopic release open release, distraction arthroplasty, total elbow replacement and there are four approachs in the open release - anterior approach, medial "over the top" approach, limited lateral approach: column procedure, posterior extensile approach-. Results and Conclusion: Although at present the arthroscopic technique is emphasized for the treatment of elbow stiffness, a surgeon should know conventional open techniques.

• Journal of the Korean Arthroscopy Society
• /
• v.11 no.1
• /
• pp.63-68
• /
• 2007

Purpose: The authors introduce a new technique of arthroscopic all inside repair using anterolateral and anteromedial portals for lateral meniscus root complete radial tear in patients who underwent concurrent anterior cruciate ligament (ACL) reconstruction. Operative technique: Arthroscope is placed through anteromedial portal and suture hook ($Linvatec^{TM}$, Largo, Florida, USA) is delivered through anterolateral portal. By rotating the suture hook, it penetrates posterior horn of the torn meniscus from femoral to tibial surface for vertical orientation. PDS No. 1 ($Ethicon^{TM}$, Somerville, NJ, USA) is delivered through the suture hook, and then it is withdrawn. Both end of PDS No. 1 are taken out through the anterolateral portal. MAXON 2-0 ($Syneture^{TM}$, Norwalk, Connecticut, USA) is used to penetrates remnant of tibial attachment of the torn meniscus from tibial to femoral surface in a same manner. MAXON 2-0 is changed for PDS No. 1 from tibial to femoral surface by shuttle relay technique. PDS No. 1 is tied using SMC (Samsung Medical Center) knot. Conclusion: All inside repair is a useful technique to achieve anatomical repair and to restore the hoop tension in lateral meniscus root complete radial tear.

• Journal of the Korean Arthroscopy Society
• /
• v.9 no.1
• /
• pp.70-76
• /
• 2005

Purpose: We describe a new technique of arthroscopic repair with using autogenous hamstring tendon graft augmentation for the acute posterior cruciate ligament rupture. Operative technique: A routine arthroscopic examination of the knee joint is initially performed, then the posterior trans-septal portal is prepared with the using the posteromedial and posterolateral portals. The torn tibial stump that is retracted to the posterior compartment is repaired by a suture hook that is introduced through the anteromedial portal; visualization during this procedure is done with the arthroscope via the posteromedial portal. Using the retrieved suture, both suture ends are brought out to the anteromedial portal. The torn tibial stump is pulled to the intercondylar notch and then repaired with stitches at the anterior compartment. After the tibial and femoral tunnels are prepared without damaging the remnant PCL bundle, the combined torn PCL fibers and the autogenous single-bundle semitendinosus and gracilis tendon grafts are passed through the femoral tunnel and fixed together Conclusion: Arthroscopic repair of the torn tibial stump and autogenous hamstring tendon graft augmentation after preparing the tibial and femoral tunnels by using the trans-septal portal, without damaging the remnant PCL bundle, seems to be a very effective method for the treatment for acute PCL injuries, and especially for tears at the femoral attachment.

• Journal of Korean Foot and Ankle Society
• /
• v.18 no.4
• /
• pp.189-194
• /
• 2014

Purpose: The purpose of this study was to compare the clinical and radiologic results of arthrodesis between anterior approach and transfibular approach arthrodesis in ankle arthritis. Materials and Methods: There were 61 cases of ankle arthritis treated by anterior or transfibular ankle arthrodesis in our hospital from April 2008 to March 2012. We investigated 29 cases (27 patients) who underwent ankle arthrodesis with an anterior approach (15 cases) and transfibular approach (14 cases), and were followed for over two years. Clinically, American Orthopaedic Foot and Ankle Society (AOFAS) ankle-hindfoot score, pain visual analogue scale (VAS), and subjective satisfaction degrees were evaluated. In addition, ankle coronal and sagittal alignments were evaluated using plain radiographs at 6 and 24 months, postoperatively. Results: Clinically, preoperative mean AOFAS score and VAS was 41.3 and 6.4, and were changed to 58.9 and 3.3 postoperatively in the anterior approach group. In the transfibular approach group, preoperative mean AOFAS score was 36.6 and VAS was 7.1, and they were changed to 54.9 and 3.4 postoperatively. However, no significant differences in the clinical results were observed between the two groups (p=0.297). Duration of attaining union was 8.1 weeks in the anterior approach group and 10.4 weeks in the transfibular approach group. Complications were delayed union in one case, nonunion in three cases, cancellous screw breakage in three cases, and complex regional reflex syndrome in one case. Conclusion: After transfibular ankle arthrodesis as treatment of ankle osteoarthritis, the tendency for valgus angulation of the ankle at the final follow-up was observed and 6.5 mm cancellous screw breakage occurred frequently. Therefore, in order to achieve better stability, it is necessary to use 6.5 mm cannulated screws rather than 6.5 mm cancellous screws for ankle arthrodesis.

• The Journal of the Korean bone and joint tumor society
• /
• v.15 no.1
• /
• pp.69-74
• /
• 2009

Soft tissue sarcomas of popliteal fossa are rare, accounting for less than 5% of all soft tissue sarcomas of the extremities. In an extracompartmental space such as the popliteal, cubital fossa and inguinal space, where major vessels and nerves traverse, performing resections with wide margin is difficult and sometimes marginal margin is inevitable for limb salvage. For popliteal tumor resection, posterior approach would be a classic method. For tumors with small size and not adherent to surrounding structures, tumor is easily resected by this approach and dissection of nerve sheath or adventitia of vessel. On the contrary, tumors of large size and infiltrating the posterior structure of knee joint may show difficulty in en-bloc resection itself. These cases were candidates for amputation. Furthermore, tumors involving both popliteal fossa and anterior compartment usually had no choice but to have an amputation to prevent local recurrence. We regarded soft tissue sarcoma showing this kind of presentation as bone tumor having extraosseous mass. We performed wide en-bloc resection of proximal tibia and fibula along with sarcoma involving both compartment on liposarcoma of 47-year old man.

• Journal of the Korean Arthroscopy Society
• /
• v.13 no.3
• /
• pp.280-284
• /
• 2009

Purpose: The authors introduce a new technique of arthroscopic reduction of subluxed medial meniscus using suture anchor for the restoration of hoop stress. Operative Technique: Anterolateral, anteromedial, and medial midpatellar arthroscopic portal are used. Arthroscope was inserted through anterolateral portal. Through the scope, we confirmed subluxation of medial meniscus. Transection of menisci including radial and root tear were excluded. We released the anterior horn of medial meniscus through anteromedial and burred the future insertion site of suture anchor. After inserting suture anchor through medial midpatellar portal, we used 90 degree suture hook and no.2 Nylon to retrieve the suture of inserted anchor. We tied the suture by sliding knot-tying method. Weight bearing was limited for 6 weeks postoperatively. Conclusion: Arthroscopic retightening of medial meniscus is less invasive, conserving and progressed method for subluxed meniscus.

• Journal of the Korean Arthroscopy Society
• /
• v.13 no.2
• /
• pp.174-178
• /
• 2009

Purpose: We introduce arthroscopic assisted core decompression for humeral head osteonecrosis. Operative technique: After diagnostic shoulder arthroscopy is performed using posterior and anterior portal, we make a 2 cm lateral skin incision approximately 3 cm distal to 1/3 of lateral margin of the acromion and place short gray cannula to prevent adjacent soft tissue injury when insert guide pin. Under C-arm fluoroscopic and arthroscopic guidance, 3 to 4 guide pins are inserted toward the necrotic area. Then we perform drilling using 7.0 mm reamer. Conclusion: We believe this technique is a less invasive approach and avoids the complications comparing to deltopectoral approach. Arthroscopic assisted core decompression is an effective procedure in management of early stage of the humeral head osteonecoris.

• Journal of Yeungnam Medical Science
• /
• v.14 no.1
• /
• pp.209-219
• /
• 1997

Objectives: Anterior approach to achieve arthrodesis of the cervical spine has become a widely accepted and often-used approach since its earliest reports by Bailey and Badgley, Smith and Robinson and Cloward. However, anterior interbody fusion in the presence of the posterior instability may be complicated by the bone graft dislodgement, kyphotic defomity or nonunion. As an attemp to prevent this undesirable complication, additional methods such as skeletal traction, halo appratus or even posterior fusion has been utilized. Therefore, The cervical spine locking plate(CSLP) with the anterior intervertebral body bone grafting provide immediate cervical stabilization and widely successful in achieving fusion. Material and methods: This study analysed 14 patients who underwent a single anterior procedure and application of CSLP for the treatment of the cervical spinal disorder. Eleven patients were disc herniations and three patients were traumatic lesion. The average age of the patient was 47 years and the mean follow up periods was 20 months ranging from 13 to 27 months. Results: Ambulation was started 2nd day after the operation with the aid of the Philadelpia orthoses. Bone union was observed 13 cases on average 12 weeks after operation. The one case was nonunion with plate breakage without clinical symptom. Conclusion: Anterior fusion with CSLP are thought to be a safe and valuable method for treating cervical spine disorder.

• The Journal of the Korean bone and joint tumor society
• /
• v.3 no.2
• /
• pp.131-136
• /
• 1997

Although chondrosarcoma is a common primary malignant bone tumor, its occurrence in the spine is very rare. It is also well known that even after complete removal of chondrosarcoma in bone, not a few recurrence is possible. Surgical cure of a spinal chondrosarcoma is even more difficult because total excision of chondrosarcoma is usually impossible in the spine. No patients with spinal chondrosarcoma surviving more than 18 years has been reported in literature. We are reporting one patient(32 year old housewife) with chondrosarcoma at the $12^{th}$ thoracic spine which was treated with complete corpectomy of the $12^{th}$ thoracic vertebral body and rib and cancellous bone graft fixed with plating. She was followed for more than 3 years without local recurrence or distant metastasis.