• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2005.11a
• /
• pp.106-109
• /
• 2005

산업화와 더불어 자동화의 요구에 따라 여러 분야에서 유도전동기의 응용 사례가 늘어나고 있다. 본 연구는 인버터단의 전류센서에서 실시간 얻어진 전류신호로 부터 대표적인 전기, 기계적인 4가지 고장(Bearing Fault, Broken Rotor bar, Misalignment, Unbalance)을 검출하여 예기치 못한 고장에 대비할 수 있는 실시간 진단 알고리듬을 제시한다. 실시간 진단의 핵심요소인 동기화 방법으로서 Hilbert Transform을 응용하였다. 총 40세트의 정상 모터 데이터를 임의로 선택하여 두 데이터의 차를 이용하여 0에 근사한 정상 모터 뎀플릿 값을 설정하였다. 이를 이용하여 진단 대상 전동기의 고장 유무를 미리 판단하게 된다. 만약 기준치 이상의 오차가 나타나게 되면, 이와 비교하기 위한 미리 수집된 각4가지 고장 전동기의 미소신호 템플릿 데이터와의 유사성을 비교하여 고장의 종류를 표시하며, 고장의 종류가 진단되지 않은 대상은 고장 유무만 표시된다.

• Applied Chemistry for Engineering
• /
• v.26 no.1
• /
• pp.116-119
• /
• 2015

Field-effect transistor (FET)-based ion or biosensors have been intensively studied so far. Among many measurement methods, the variation of the drain current can be induced when ions or biomolecules are interacted with sensing membranes located on the gate insulator of FET. One of typical FET-type sensors is an ion-sensitive field-effect transistor (ISFET) utilized in this study. In ISFET, the voltage is usually applied to the reference electrode instead of the gate voltage. Firstly, the voltage applied to the reference electrode versus the drain current was observed, and the steepest slope in this graph was found. Using this point, the optimized condition was established for the larger variation of the drain current in the saturated region in response to the variation of the input in the dynamic range.

• Journal of IKEEE
• /
• v.23 no.4
• /
• pp.1157-1165
• /
• 2019

This paper discussed the results of the development and application of the machine learning algorithm to the induction motor for the preventive diagnostic system using current and magnetic flux signals. The optimal 29 features were extracted for identifying faulted types of induction motor. In particular, any load rate was derived using the tendency of the difference value from the center of the 7th harmonic frequency to the sideband of the current signal, and the corresponding classification accuracy showed about 84.6% by the KPCA feature reduction technique and the k-NN determination algorithm.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.15 no.1
• /
• pp.84-89
• /
• 2001

This paper deals with multiresolution analysis of wavelet transform for partial discharge(PD), composite discharge(corona + surlace discharge). Multiresolution analysis was used for performing discrete wavelet transform PD signals was decomposed into "approximation" and "detail" cOmpJnents until 4 levels by using discrete wavelet analysis. In this paper, daubechies family is adopted for the research of the characteristics of PD signals. 1be results show that in corona discharge the segment 7, 8, 9, 10, 1] values of defined variable is increased with discharge process, so phase distribution is characterized by 210~330 ranges. In case surface discharge in expoxy insulator inserted, defined variable values is fairly symmetric chscharge pattern because coupled both corona and dielectric oounded discharges. We can confimJly discriminate the type of PD source.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.5
• /
• pp.1009-1014
• /
• 2012

This paper has proposed a 2,500 MHz ~ 2,570 MHz 0.13-${\mu}m$ CMOS RF front-end transmitter for LTE-Advanced systems. The proposed RF front-end transmitter is composed of a quadrature up-conversion mixer and a driver amplifier. The measurement results show the maximum output power level is +6 dBm and the suppression ratio for the image sideband and LO leakage are better than -40 dBc respectively. The fabricated chip consumes 36 mA from a 1.2 V supply voltage.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.101-101
• /
• 2012

본 논문은 현재 제품화 단계로 진행 중인 터보 분자펌프(turbo-molecular pump, TMP)와 극저온 펌프(cryopump)의 고장 방지 및 예지 보수를 위한 상태 진단 시스템에 대하여 소개를 한다. 본 상태 진단 시스템은 고진공 펌프들의 다중 상태변수 즉 흡/배기부의 진공 압력, 부위별 온도, 소비 전류(혹은 전력), 그리고 부위별 진동 신호들을 실시간으로 측정하는 상태변수 수집장치, 수집된 시계열 상태변수들이 저장된 database, 그리고 저장된 상태변수를 이용한 고진공펌프의 상태진단 프로그램으로 구성되어 있다. 금번 연구에서 구축한 상태변수 체계의 특징 중 하나는 진동신호를 상태변수로 측정하여 이를 상태진단에 활용하는 점이 기존의 접근방법과 상이한 점이다. 실시간 신호 수집장치는 NI사 PXI 시스템 기반의 16채널 24-bit 동시 전압신호 측정 모듈, 8부위의 온도 측정장치(Lakeshore 218S, RS-232C 통신), 그리고 펌프의 소비전류/전력 측정장치(Hioki 3169, RS-232C), 그리고 고진공 펌프의 흡입 및 배기구의 진공도 측정장치로 구성하였다. 신호 수집용 프로그램은 NI사 Labview를 이용하여 작성하였다. 본 장치는 Nano-Fab 센터의 협조 하에 turbo-molecular 펌프와 cryopump측정 단에 각각 1대를 설치 완료하였으며 현재까지 운용 중이다. PC에 저장된 시계열 상태변수 database는 기 개발된 적응형 인자모델을 이용한 매개변수로 변환되며, 상태진단은 변환된 매개변수를 이용하여 수행할 예정이다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.10
• /
• pp.39-45
• /
• 2011

This paper proposes a low power current-steering 10-bit DAC selecting clock enable signal. The proposed DAC reduces the clock power by cutting the clock signal to the current-source cells in wihich the data will not be changed. The proposed DAC was implemented using a 0.13${\mu}m$ CMOS process with $V_{DD}=1.2V$. Its core area is 0.21$mm^2$. It consumes 4.46mW at 1MHz signal frequency and 200MHz sampling rate. The clock power is reduced to 30.9% and 36.2% of a conventional DAC at 1.25MHz and 10MHz signal frequencies, respectively. The measured SFDRs are 72.8dB and 56.1dB at 1MHz and 50MHz signal frequencies, respectively.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.15 no.2
• /
• pp.142-149
• /
• 2010

Interior Permanent Magnet Synchronous Motor(IPMSM) have gained an increasing popularity in recent years for a variety of industrial applications, because of their high power density, high efficiency and possibility of flux weakening operation. Because the efficiency of IPMSM is one of the important performance characteristic, the Maximum Torque Per Ampere(MTPA) operating method has been indispensible. In theory, MTPA operating point can be calculated using the exact values of the machine parameters. However, the values of the IPMSM parameters are known to vary widely according to the operating condition. Therefore, to operate the IPMSM in the MTPA operating point, the machine parameters should be estimated in real-time. In this paper, the new MTPA operating method based on the signal injection is presented. By injecting the high frequency current signal, the MTPA operating criteria can be calculated by measuring the input power to IPMSM. The proposed method can find the MTPA operating point with simple signal processing regardless of the parameter variation.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.6
• /
• pp.76-82
• /
• 2000

This paper describes the machining characteristics of cylindrical plunge grinding. The study investigates the process using the current signals of a spindle motor through a hall sensor. Grinding experiments were conducted under various conditions such as wheel speeds, workpiece speeds and infeed rates with a conventional vitrified bonded wheel. Analyzing the current signal of the spindle motor, a relationship between current signals and the metal removal rate in terms of the in(red rate is induced. It was also shown that a hall sensor has similar capabilities in evaluation of grinding behavior compared to the AE signals, which are useful far monitoring the grinding process.

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2076-2078
• /
• 2003

전력 케이블의 고장점 탐지를 상시 감시하고 있는 데이터로부터 on-line으로 할 수 있도록 하기 위한 전력 케이블 고장 신호의 전처리 기술 개발에 관하여 언급하였다. 고장 전류 파형을 모의하고 측정할 수 있는 케이블 고장 모의 측정 시스템을 구성하여 고장 전압과 전류 파형을 측정하였으며 측정된 신호로부터 고장점을 보다 정확하고 빠르게 연산할 수 있도륵 하기 위한 down sampling, filtering 등 전처리 과정에 대하여 시뮬레이션하고 그 결과에 대하여 논하였다.