• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.2
• /
• pp.262-267
• /
• 2011

In the power system, the transformer's neutral earth reactor line 1 grounding failure may occur. By limiting the magnitude of the failure grounding current flow, it will aid to reduce the failure of the transformer. Consequently, this also may avoid the failure of the disconnection of the industrial insulator line that cause by melting. Besides, utilizing the decreasing circuit breaker or others related equipment can use to avoid the possibility of explosion of the transformer. If the failure happen during the operation of the power system, a huge interference will definitely may occur. Therefore, by installing the DONGBUSAN S/S #3M.Tr neutral earth reactor among TOP and BOTTOM BRACE part in the power system, the causes of the rising temperature and reason of the over-current flow that cause by over-current can be analyze.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.2162-2163
• /
• 2011

현재 산업의 발전으로 인해 전기의 사용량이 증가하고 있는 상태이다. 이로 인하여 지락이나 단락과 같은 사고 발생 시 전류가 급격하게 증가하게 된다. 이러한 급격한 사고전류를 제한하기 위하여 본 논문에서는 재폐로 동작을 접목하여 전압 증가 시 사고유형별 3상 변압기형 초전도 한류기에 대해서 분석하였다. 재폐로 주기는 5-10-7-20주기로 설정하였고, 1선지락과 2선지락일 때 3상 변압기형 초전도 한류기의 전류제한에 대해서 분석해보면, 1선지락 일 때 2선지락 사고일 때보다 사고 제한율이 높은걸 확인 할 수 있다. 하지만 2개의 초전도 소자의 동시 ��치가 아닌 불균형 ��치가 일어나서 하나의 소자만이 전류를 제한하였다. 그리고 스위치가 open 되었을 때 초전도체의 회복특성은 전류제한과 마찬가지로 1선지락일 때 보다 빨리 회복되는 것을 확인 할 수 있다. 이처럼 사고 발생 시 사고전류를 낮게 제한하고, 재폐로 동작을 통하여 빠르게 사고 확인을 하여 사고를 차단할 수 있다고 사료된다.

• Electric Engineers Magazine
• /
• v.186 no.2
• /
• pp.24-30
• /
• 1998

전력용 변압기의 단락임피던스를 현장에서 측정하기도 하며 명판이나 공장시험치와 비교 할수도 있다. 이러한 과정은 공장시험이 실시된 이후에 발생 할 수 있는 권선의 이동을 검출하기 위한 것이다. 권선의 이동은 보통 큰 고장전류 또는 운송이나 설치시의 기계적 손상으로 인하여 발생한다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.5 no.4
• /
• pp.358-369
• /
• 2000

Shielded metal arc welding machines with AC transformer have been widely used for thin-plate welding applications. Because of being bulky, heavy and of tap-changing property, so the SMAW's are changing to new power electronic circuits such as inverter circuit in order to reduce the system size and also to improve the welding performances at input output sides. The PWM inverter arc welding machine with diode rectifier has better output welding performances but it is has the plentiful harmonics and the lower input power factor. To solve these problems, input current-controlled scheme is considered for PWM inverter arc welding system, and then total input power factor is maintained to be more than 99%. Also a new combined control is proposed which can control both instantaeous welding output voltage and current under constant power condition, and as a result the variations of instantaneous current and voltage can be reduced to very narrow range in the V-I curve relationship, and hence the variance of welding current and voltage become so reduced. In addition the spatter generated during welding process is greatly reduced up to 70%. And the overall effiency can be improved up to 10%, which becomes higher when the load is lower.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.8 no.6
• /
• pp.504-511
• /
• 2003

In this paper, inverter type neon power supply using a piezoelectric transformer is fabricated and its characteristic is investigated. Developed neon power supply is composed of basic circuit and blocks, such as rectifier part, frequency oscillation part and piezoelectric transformer and resonant half bridge inverters. In this paper for complement the low power limitation, piezoelectric transformer at parallel connected driving by inverter is studied for noon tubes system of high power. When piezoelectric transformer is connected with parallel, LC filter connection method with parallel and selection of inductance L and capacitor C of primary side is suggested for reduce unbalanced current at the terminal of each transformer. Piezoelectric transformers use piezoelectric ceramic devices. Thus it is wireless therefore it has high power density, high Isolation level, low loss, more light, and miniaturization. In addition, high voltage transfer ratio is expected because there is no leakage inductance. Also, it has economic merit that the electrical loss Is low because structure is simple, small and tighter weight.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.14 no.6
• /
• pp.35-42
• /
• 2000

In this paper, AE(Acoustic Emission) signals detected from the growth of the electrical tree in an epoxy resin under ac high-voltage application were analysed to diagnose the insulation deterioration of cast-resin power transformer. Frequency spectra of AE signals generated from the magnetizing and the load currents in the actual operating cast-resin power transformer of 500[kVA] under distribution system of 22.9[kV] were also analysed to distinguish the AE signals due to void discharges from the magnetic circuit noises in the core of the transformer. As the experimental results, we could distinguish the AE signals whether those signals were caused due to the void discharges or due to the magnetic circuit noises by analyzing the frequency spectrum of AE signals. The frequency spectra of AE signals generated from the cast-resin power transformer in operation due to both the magnetizing and the load currents appeared in the range of 40-120[kHz], but the frequency band of AE signals emitted from the void discharges in an epoxy resin sample was about 50[kHz] to 230[kHz].

• Proceedings of the KIEE Conference
• /
• 2005.04a
• /
• pp.108-110
• /
• 2005

배전용 변압기의 경우 고장 발생시 직접적인 수용가 측에 피해가 발생되며, 변압기 폭발시 인명 피해까지 우려되고 있다. 변압기 내부 고장으로 절연유가 분출될 경우가 가장 심각한 고장으로 이러한 피해를 방지하기 위해서는 내부 고장에 대한 정확한 해석이 필요하다. 본 연구에서 변압기 권선내에서 발생되는 고장을 유한요소 전자계해석 프로그램(FLUX2D)을 이용하여 해석하였다. 50kVA, 13200/230(V) 단강 변압기의 권선고장시 전자계해석, 1차측 권선고장(turn-to-earth)과 2차측 권선고장(turn-to-turn)을 모의하여 해석하였다. 또한, 권선 내부 고장 및 2차측 단락시 누설자속분포, 1차 및 2차측 고장전류, 권선간의 힘의분포 등을 해석하였다. 분석결과는 변압기의 절연설계 및 단락기계력에 대한 프레임 구조 설계를 위한 자료로 활용된다.

• Proceedings of the KIEE Conference
• /
• 2006.10b
• /
• pp.136-140
• /
• 2006

• Electric Engineers Magazine
• /
• v.236 no.4
• /
• pp.33-36
• /
• 2002

• 전기산업
• /
• v.15 no.5
• /
• pp.87-108
• /
• 2004