• Title/Summary/Keyword: 전로(前路)

검색결과 138건 처리시간 0.025초

감전사고 방지를 위한 한국인의 인체저항에 관한 연구

  • 김찬오;김동주;이규정
    • 한국산업안전학회:학술대회논문집
    • /
    • 한국안전학회 2000년도 춘계 학술논문발표회 논문집
    • /
    • pp.78-83
    • /
    • 2000
  • 일반적으로 사람의 신체는 전기가 흐르기 쉬운 도체(Conductor)에 해당한다. 인체를 전로의 일부로 하여 전류를 흘려주면, 극히 미약한 전류는 느끼지 못하지만 전류를 증가시켜 나가면 차차 견딜 수 없게 되며 더 큰 전류를 흘려주면 인체에 여러가지 장해현상이 발생하게 된다. 이와 같이 인체에 전류가 흐름으로써 발생하는 감전(Electric Shock)현상은 단순히 전류를 감지하는 정도의 가벼운 것으로부터 고통을 수반한 쇼크 또는 근육의 경직, 심실세동에 의한 사망 등 여러 증상을 보이며, 인체에 대한 통전전류가 크고 인체의 중요한 부분을 장시간 흐를수록 위험하다. (중략)

  • PDF

콘크리트용 골재로서 전로슬래그의 활용 (The Utilization of Converter Slag as Aggregates for Concrete)

  • 천승환;문한영;유정훈
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2000년도 가을 학술발표회논문집(I)
    • /
    • pp.379-382
    • /
    • 2000
  • In this paper, we evaluated the suitability of converter slag as concrete aggregate by measuring physical and chemical characteristics of converter slag. The converter slag mainly contains SiO₂and CaO as the chemical composition. The reaction with water and a little of free CaO in the slag causes slag's volume to expanse. Therefore, we used several aging method in order to decrease the characteristics of slag volume expansion. Then the compressive strength of concrete with the converter slag aggregate is measured.

  • PDF

적분회로를 응용한 능동 RC 회로합성 (Active RC Synthesis Using Integrators)

  • 이영근
    • 대한전자공학회논문지
    • /
    • 제9권5호
    • /
    • pp.6-11
    • /
    • 1972
  • 임의의 안정한 전달함수를 실현하는 일반적인 능동 RC회로합성방법에 대하여 논의하였다. 회로요소는 R, C, 및 연산증폭기 뿐이며, 회로구성은 박막 RC전로와 IC연산증폭기를 적용하는데 적합하다. 극과 전송령은 서로 독립식으로 조정될 수 있으며, 이들은 회로요소들의 변화에 민감하지 않다.

  • PDF

삼중수소 제거공정 모델링 및 정밀 모사

  • 금충기;정홍석;이한수;송명재;손순환
    • 한국원자력학회:학술대회논문집
    • /
    • 한국원자력학회 1995년도 춘계학술발표회논문집(2)
    • /
    • pp.859-864
    • /
    • 1995
  • 중수형발전로의 가동에 따라 중수는 삼중수소로 오염된다 오염된 중수의 정화에 적합한 공정으로 평가되는 기액촉매교환과 초저온증류공정으로 이루어진 촉매복합공정에 대하여 탑내의 유속비 및 이론단수의 변화에 따른 촉매탑과 증류탑에서의 삼중수소 제거율 및 농축률 그리고 탑내의 수소동위원소의 농도분포변화를 Newton-Raphson 방법을 사용하여 전산모사를 수행하여 구하였다. 이러한 해석은 본격적 최적화 설계의 기초입력자료로 활용될 것이다.

  • PDF

저압전로의 지락보호에 관한 기술지침

  • 이주철;이위문
    • 전기기술인
    • /
    • 제265권9호
    • /
    • pp.38-43
    • /
    • 2004
  • 전기 사업법의 규정에 의한 기술기준은 전기설비의 안전 확보를 위하여 필요한 최소한의 사항을 준수하도록 의무화 하고 있다. 또 전기관련 기관 · 학계 · 단체 및 업계의 참여로 작성되는 전기설비의 ┌기술규정┘은 이러한 기술기준에 필요한 기술적인 사항을 규정함과 동시에 민간자율규정으로서 설계, 시공, 유지, 검사 등에 관한 사항을 구체적이고 알기 쉽게 풀이하여 전기사업자를 비롯한 전기설비의 시설자, 공사 관계자가 지켜야 할 사항을 그 내용에 따라 의무적 사항, 권고적 사항, 권장적 사항으로 구분하여 규정하고 있다.(중략)

  • PDF

저압전로의 지락보호에 관한 기술지침

  • 이주철;이위문
    • 전기기술인
    • /
    • 제267권11호
    • /
    • pp.35-39
    • /
    • 2004
  • 전기사업법의 규정에 의한 기술기준은 전기설비의 안전확보를 위한 필요한 최소한의 사항을 준수하도록 의무화하고 있다. 또 전기관련관, 학계, 단체, 및 업계의 참여로 작성되는 전기설비의 기술규정은 이러한 기술기준에 필요한 기술적인 사항을 규정함과 동시에 민간자율규정으로서 설계, 시공, 유지, 검사 등에 관한 사항을 구체적이고 알기 쉽게 풀이하여 전기사업자를 비롯한 전기설비의 시설자, 공사 관계자가 지켜야 할 사항등을 그 내용에 따라 의무적 사항, 권고적 사항, 권장적 사항으로 구분하여 규정하고 있다.

  • PDF

연속흐름 모형실험장치를 이용한 전로슬래그에 의한 인산염 제거 (Phosphate removal by the continuous flow pilot plant with converter slag)

  • 이상호;황정재
    • 상하수도학회지
    • /
    • 제28권4호
    • /
    • pp.453-459
    • /
    • 2014
  • The excessive concentration of phosphorus in the river and reservoir is a deteriorating factor for the eutrophication. The converter slag was used to remove the phosphate from the synthetic wastewater. Influencing factors were studied to remove soluble orthophosphate with the different particle sizes through the batch and the column experiments by continuous flow. Freundlich and Langmuir adsorption isotherm constants were obtained from batch experiments with $PS_A$ and $PS_B$. Freundlich isotherm was fitted better than Langmuir isotherm. Regression coefficient of Freundlich isotherm was 0.95 for $PS_A$ and 0.92 for $PS_B$, respectively. The adsorption kinetics from the batch experiment were revealed that bigger size of convert slag, $PS_A$ can be applied for the higher than 3.5 mg/L of phosphate concentration. The pilot plant of continuous flow was applied in order to evaluate the pH variation, breakthrough points and breakthrough adsorption capacity of phosphate. The variation of pH was decreased through the experimental hours. The breakthrough time was 1,432 and 312 hours to 10 mg/L and 50 mg/L for the influent concentration, respectively. The breakthrough adsorption capacity was 3.54 g/kg for 10 mg/L, and 1.72 g/kg for 50 mg/L as influent phosphate concentration.

옥외용 LED 조명의 전기화재 및 감전 위험성 평가에 대한 실험적 고찰 (Experimental Studies on the Risk Assessment of Electrical Fire and Shock of LED Lighting for Outdoor)

  • 김향곤;길형준;김동욱;김동우;이기연;문현욱;김혁수;김명수;김만건
    • 한국화재조사학회학술대회
    • /
    • 한국화재조사학회 2011년도 제21회 춘계학술대회
    • /
    • pp.77-97
    • /
    • 2011
  • 본 논문에서 옥외용 LED 조명의 전기화재 및 감전 위험성 평가에 대하여 연구하였다. 옥외용 LED 조명관련 법 규정에 대하여 검토하였으며, LED 조명의 외형과 구조에 대하여 분석하였다. 또한, LED 조명에 대한 주수실험, DC 전로의 선간 단락, 손상된 피복의 선간 절연파괴, 과전압 유입, 건전상 및 수중에서의 DC 전로의 누전 실험을 수행하였다. 실험 결과로부터, LED 조명에서의 이상 조건에 의한 전기화재나 감전사고의 위험성이 있음을 확인할 수 있었으며, 전기안전을 위한 보호장치와 절연형 컨버터의 사용이 요구된다. 본 연구결과는 LED 조명의 전기안전 확보를 위한 제 규정의 개선과 전기사고의 조사에 도움이 될 것으로 기대된다.

  • PDF

전로 취련제어를 위한 신경회로망 및 사례기반추론의 통합 접근 방법 (Hybrid Case Based Reasoning and Neural Networks Approach for Blowing Control of Basic Oxygen Furnace)

  • 김종한;박정준;정성원;박진우
    • 한국경영과학회:학술대회논문집
    • /
    • 한국경영과학회 2003년도 추계학술대회 및 정기총회
    • /
    • pp.201-204
    • /
    • 2003
  • A hybrid artificial intelligence approach based on combining case based reasoning and neural networks is presented. The approach is designed to allow for solving blowing control of BOF(basic oxygen furnace), example of which lie at the core of steelmaking process control systems application in the steel industry. According to this hybrid approach, the system, when faced with a new problem, first retrieves similar cases and neural network is used to solve the problem. Experimental Results indicate that combining case based reasoning and neural network offers an efficient approach to solving control and prediction problem

  • PDF

산화철계 형석대체제의 전로 정련특성 (BOF Refining of Fluorspar Substitute Using Iron Oxide Based By-product)

  • 금창훈;허보영
    • 한국재료학회지
    • /
    • 제16권5호
    • /
    • pp.336-340
    • /
    • 2006
  • Fluorspar has been essential flux in steelmaking process. The main effects of fluorspar addition are lowering of the viscosity and melting temperature of slag. In recent years, due to the increasing price and environmental problem of fluorspar, various types of fluorspar substitute have been investigated. In this study, iron oxide by-products such as sinter dust, basic oxygen furnace (BOF) sludge and mill scale were developed as a substitute in terms of waste recycling. Several plant trials were carried out by addition of briquetted substitutes of $4{\sim}6$ kg/ton to compare with the fluorspar of $0.7{\sim}1$ kg/ton. The substitutes showed a similar behavior of slag formation, phosphorus removal and MgO saturation content.