• Journal of the Korean Ceramic Society
• /
• v.38 no.9
• /
• pp.829-833
• /
• 2001

There have been many studies about the chemical corrosion of converter's refractories. However, few studies have been reported for the stress corrosion induced by the weight of the refractories and by the two bottom shape models designed for the converter. In this study, the stress distributions of the two converter models were analyzed by FEM. Model 1 has the step edge shape and model 2 has the round edge shape. Simulation results show that model 2 of round bottom edge has higher gravitational stress just below the slag line than the model 1. Model 2 is considered to suffers more serious corrosion than model 1 during the middle working stage by the thermal and chemical factors.

• Electric Engineers Magazine
• /
• s.284
• /
• pp.21-25
• /
• 2006

산업자원부 고시 제2005-1(2005.1.10)호에 의거 전기설비기술기준 제16조 (전로의 절연사항 및 절연내력) 1항의 단서조항으로 다만, 정전이 어려운 경우 등 절연사항 측정이 곤란한 경우에 는 누설전류를 1mA이하로 유지하여야 한다. 라고 개정고시 됨에 따라 현장업무에 적용되고 있으나, 기준적용의 어려움은 물론 예상되는 문제점을 고찰하고자 한다.

• Resources Recycling
• /
• v.1 no.1
• /
• pp.14-22
• /
• 1992

As a basic study to recover the copper from the copper converter slag, the characterisitcs of converter slag was studied. The results obtained in this work are as follows. 1. The copper converter slag is composed of Cu, $Cu_2$S, $Fe_3$$O_4$, Fayalite and silicate. 2. It is supposed that magnetite in converter slag is oxidized to hematite at $720^{\circ}C$ and this phase is soluted to fayalite. 3. As the converter slag is added in the water solution, pH increased and the heavy metal ions in the water are adsorbed on the slag. 4. Work index of the converter slag cooled for the 10 hour and the 2 hour are 25~27 kWh/ton and 35 kWh/ton, respectively. 5. In the case of grinding test of converter slag, fayalite in converter slag is easily grinded than magnetite in converter slag.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.3 no.2
• /
• pp.171-179
• /
• 2015

Recently, development of substitution aggregate is urgently needed because aggregate shortage is continuing due to the exhaustion of natural aggregate and strict restrictions of environment in construction industry. Therefore, In this study, new processing method to solve the problems of processing method of existing converter slag, namely, rapid cooling slag produced by the rapid cooling and crushing process of the high temperature melten slag into the rotary drum and then using the cooling water, compressed air and steel ball was examined fundamental properties for utilize as fine aggregate for concrete. In addition, through this study, we propose the utilization method of rapid cooling slag as fine aggregate for concrete.

• Proceedings of the KIEE Conference
• /
• 2005.05b
• /
• pp.80-83
• /
• 2005

우리나라의 실내의 배전로는 접지방식(Grounded System)이 일반적이고, 전로의 일선 지락 시에는 누전전류 차단기 혹은 과전류 차단기에 의해 전로를 차단하여 전기적인 사고 예방을 도모하고 있다. 그러나, 생명 유지 장치(Life-Sustaining Equipment)를 사용하고 있는 수술실 등 의료실의 배전 계통에 있어서의 전로의 차단은 치명적인 사고를 유발 할 수 있다. 이에 비하여, 비접지 배선방식(Isolated Power System)은 일선 지락 시에도 지락 전류 ((Ground-Fault Current)를 현저히 적게 할 수 있기 때문에 전원 공급은 계속되어 질 수 있다. 그러므로, 전원 공급의 높은 신뢰성이 요구되는 의료용 전기기기의 회로에는 비접지배선 방식으로 시설토록 규정 하고 있다. 또한, 지락 전류가 현저히 적기 때문에 선로 절연 감지기(Line Isolation Monitor)를 설치하여 의료진이나, 환자를 누설 전류에 의한 전기적 쇼크(Electrical Shock)를 방지하는 시스템이다.

• Resources Recycling
• /
• v.8 no.1
• /
• pp.44-51
• /
• 1999

Converter slag was reduced and modified by the simultaneous addition of carbon and waste foundry sand as a $SiO_2$ source. The basic properties such as phase distribution, composition, specific density, hardness. absorption of water and compressive strength of modified slags were measured. The Iron recovery was significantly affected by the basicity of slag. The properties of slow cooled-modified slags of basicity 1.34 arc very similar to the natural aggregates.

• Resources Recycling
• /
• v.16 no.4
• /
• pp.10-16
• /
• 2007

As a basic study for reusing converter slag as slow-release potassium fertilizer by a sintering process, powdery converter slag and reagent grade $SiO_2\;and\;K_2CO_3$ were mixed with ball mill above 24 hours and sintered at $900^{\circ}C{\sim}1000^{\circ}C\;for\;10{\sim}60$ min. Basicity of the mixed powder was controlled to 0.7, 1.0 and 1.4 and content of $K_2O$ was fixed with 22 mass%. After sintering, property of the potassium fertilizer was investigated with X-ray diffraction pattern and ICP analysis. Also effects of basicity, sintering temperature and time on the making slow-release potassium fertilizer was investigated. Water solubility of KBO in sample were decreased with sintering time, temperature and decreased with basicity. Citric acid solubility of $K_2O$ were increased with basicity and decreased with sintering temperature.

• Cement Symposium
• /
• no.14
• /
• pp.20-27
• /
• 1986

• Journal of the Korea Concrete Institute
• /
• v.14 no.4
• /
• pp.597-607
• /
• 2002

Electric arc furnace and converter slag are produced by about 6 millions tons in Korea at 2000 year. But compared with blast furnace slag, those are utilized only in unvalued material like landfill and road construction. There are unstable materials, like free CaO, in electric arc furnace and converter slag at steel-manufacturing process. This might cause volume expansion in concrete, if electric arc furnace and converter slag aggregates were used in concrete. This expansion may reach to crack or collapse of concrete. It is therefore settled by standard specification for concrete that electric arc furnace and converter slag aggregates have not to use in concrete. First of all, volume stability and stabilized process should be solved in electric arc furnace and converter slag aggregate to use in concrete. In this study, 6 types of aging are evaluated for effects of stabilization to reduce the expansion of electric arc furnace and converter slag. h converter slag aggregate, these types of aging are not good for volume stability for concrete aggregate, and even if converter slag aggregate is treated with aging, concrete with it has some problems that strength is reduced with curing days. But in electric arc furnace slag aggregate treated with hotwater and steam aging, the expansion of electric arc furnace slag aggregate is reduced about two times than that of converter slag aggregate, and electric arc furnace slag aggregate concrete has good results in strength compared with control concrete using crushed stone.

• Resources Recycling
• /
• v.12 no.5
• /
• pp.36-41
• /
• 2003

Although slag has an enough potential as the secondary resources due to its high content of iron, quite a large amount of slags are simply landfilled when market prices of iron and steel are not so beneficial. The purpose of this study is to investigate the basic characteristics regarding the recovery of iron content from slag by magnetic separation method for the enhancement of its recycling rate. Three kinds of slags such as blast furnace slag, water-cooled converter slag, and air-cooled converter slag were tested taking the strength of magnetic field, revolving speed of drum, and feeding rate of slag as the influential factors on the magnetic separation. For blast furnace slag, the recovery of iron was observed to increase as drum speed and feeding rate were lowered. For water-cooled converter slag, iron recovery was raised as feeding rate was increased and drum speed was lowered. Also, finer slag particles were observed to be more favorable for the higher recovery of iron content. Regarding air-cooled converter slags, higher iron recovery was accomplished when both feeding rate and drum speed were increased or decreased. In addition, when the magnetic field strength was increased the iron recovery was raised, however, the iron grade of separated product was observed to diminish because of the co-separation of impurities.