최근 IT 기술의 발달로 인한 전자기기 사용의 증가와 전기자동차의 상용화로 에너지 저장 기술 및 저장의 편리성에 대한 요구가 증가하게 되었다 이에 안전하고 편리한 에너지 충전 방법을 제공하는 무선 전력전송 기술의 상용화에 관심이 집중되고 있다. 본 기고문에서는 최근의 다양한 무선 전력전송 기술 및 응용에 대하여 소개한다. 특히 자기 유도현상을 이용한 무선 전력전송 기술을 개괄하고, 자기공진 방식으로 전력을 전송하는 무선 전력전송 기술의 분류, 원리, 및 적용 사례에 대하여 소개한다.
전기설비에서 전기안전을 확보하기 위해 전기설비의 전압, 전류, 절연저항, 누설전류 등을 직접 측정하고 관리하려면 시간과 비용이 많이 소요된다. 최근 전력 IT기술들의 발전과 활용이 증가하고 있는데 이러한 기술들을 전기설비 전기안전 관리에 적용할 경우 운영 및 유지보수의 효율성과 전기안전을 확보할 수 있다. 따라서 전기설비의 효율적인 관리와 전기안전을 확보하기 위한 전력 IT 기반 전기안전감시시스템을 설계하여 활용하고자 한다.
IEC 60364에서 규정하는 접지방식 중 IT접지시스템은 접지극에서의 전식문제가 없으므로 DC배전계통에 가장 적합한 것으로 전망되고 있다. 그러나 IT접지시스템의 장점을 확보하기 위해서는 운전 중인 전력선의 절연상태를 지속적으로 감시할 필요가 있으며, IEC61557은 IT접지환경에서 전력선의 절연상태를 감시하는 활선절연저항감시장치(Insulation Monitoring Device; IMD)를 설치할 것을 규정하고 있다. 본 논문에서는 활선상태인 전력선의 절연 저항을 모니터링 함으로써 IT 접지시스템의 안정성을 증진시킬 수 있는 활선절연저항감시장치를 개발하고 성능을 검증한다.
Journal of the Korea Institute of Information and Communication Engineering
/
제24권9호
/
pp.1158-1164
/
2020
In Korea, the dependence on imported energy is very high, and research to reduce standby power is being conducted based on Zigbee, a low-power technology, to reduce wasted power and improve power efficiency. However, because Zigbee is not an IoT standard protocol and is not network-based, it is necessary to build a network with a separate gateway, and research on standby power is insufficient because the standards for international power consumption of devices are ambiguous. Therefore, in this paper, we applied the IoT standard protocol MQTT to the existing Zigbee technology to build a network network without a separate gateway, and designed and implemented a standby power reduction system that collects standby power degradation and user patterns. As a result of evaluating with the existing system, it was confirmed that about 7.11% of standby power was consumed compared to the existing system.
Yi, Jeong-Hoon;Park, Dea-Woo;Bae, Suk-Myong;Kim, Eung-Sik;Kim, Hong
Proceedings of the Korean Institute of Information and Commucation Sciences Conference
/
한국해양정보통신학회 2009년도 추계학술대회
/
pp.499-502
/
2009
Supply of electric power and electricity safety for whole system and network are essential element. Electricity safety technology need rating for product and research about certification as product development that is done cotton flannel mixed with development of u-IT technology consists. Study on serve to develop electricity safety integration supervision system to apply product to u-City electric power appliance and cotton flannel mixed of u-IT appliance, Connection badness sensing instrument made device built-in electric power IT cotton flannel mixed in outlet that is used most in electric power appliance terminal. Using sensor on ZigBee, RFID performance estimation of communication and module for remote safety check of electricity safety integration supervision system. A performance experiment and estimation in PD, Arc detection diagnosis system and certification KS, electricity safety about product that get fitness finding.
The Journal of the Korea institute of electronic communication sciences
/
제8권8호
/
pp.1143-1148
/
2013
This paper deals a watt-hour meter monitor system with applying a Power Line Communication (PLC) modem and a Data Concentrator Unit (DCU). PLC modem uses the power line, so there is no need to install dedicated wiring. This system makes it possible to monitor the amount of electricity of previous current month metering data, so it can easily apply a PC-management for the electric charges and maintenance with gathering the metering data.
The Journal of the Korea institute of electronic communication sciences
/
제2권3호
/
pp.174-179
/
2007
In this paper, we present a optimal module selection using genetic algorithm under the power, area, delay constraint. The proposed algorithm use the way of optimal module selection it will be able to minimize power consumption. In the comparison and experimental results, The proposed application algorithm reduce maximum power saving up to 26.9% comparing to previous non application algorithm, and reduce minimum power saving up to 9.0%. It also show the average power saving up to 15.525% and proved the power saving efficiency.
Proceedings of the Korean Information Science Society Conference
/
한국정보과학회 2011년도 한국컴퓨터종합학술대회논문집 Vol.38 No.1(A)
/
pp.510-513
/
2011
Green IT의 실현을 위해 컴퓨팅 에너지 소모를 최소화 하고 전력 효율을 높이고자 하는 연구가 활발하게 진행되고 있다. 이러한 연구는 단일 시스템에서 데이터 센터와 같은 다중 시스템 레벨로 점차 확대되고 있는데 데이터 센터에서는 전력 절감을 위해 정책을 수립하는 방법으로 Green IT를 실현하게 된다. 대다수의 전력 절감 정책은 하드웨어 디바이스의 전력 상태를 상황에 맞게 변경시키는 방법을 사용한다. 하지만 디바이스의 빈번한 전력 상태 변경은 추가적인 전력과 컴퓨팅 오버헤드를 발생시키고, 서비스 품질과 직결되는 성능 저하의 문제를 야기할 수 있다. 따라서 본 논문에서는 데이터 센터를 구성하는 각각의 단일 시스템에서 OS를 통해 수집 가능한 정보를 기반으로 요청되는 서비스에 따라 추가적인 오버헤드 없이 처리할 수 있는 시스템을 찾고 작업을 분배하는 기법을 제안한다.
Proceedings of the Korea Information Processing Society Conference
/
한국정보처리학회 2012년도 추계학술발표대회
/
pp.1129-1132
/
2012
최근 환경보호를 위한 그린IT 기술이 주목을 받으면서 정부차원의 스마트 그리드가 부각되고 있다. 스마트 그리드는 궁극적으로 전력을 효율적으로 사용하여 소비자는 전력사용 요금을 절감하고 정부는 환경을 보호할 수 있게 된다. 하지만, 정부 차원에서의 일방적인 전력관리에는 한계가 있고 전력을 소비하는 사용자 역시 능동적으로 전력 사용량을 줄여야 큰 효과를 볼 수 있다. 따라서 본 논문은 임베디드 센서네트워크를 기반으로 일반 사용자도 댁내에서 혹은 빌딩에서 능동적으로 사용할 수 있는 스마트 전력절감 시스템을 제안한다.
Kim, Yea-Ji;Park, Dong-Kook;Sohn, Kyung-Rak;Kang, In-Ho
Journal of Advanced Marine Engineering and Technology
/
제35권4호
/
pp.506-511
/
2011
In this paper, a rectenna for wireless power transmission at 900MHz is proposed. Rectenna is a device transforming RF power into DC power and it may consist of a antenna, rectifying and charging circuits. In this paper, we designed a slot antenna to receive 900MHz signal, a rectifying circuit of about 40% efficiency at 0dBm input, and a charging circuit to store a weak power signal and supply constant voltage to load. From the experiment using a RFID reader as a transmitter for 1W power, it was found that the proposed rectenna receiving about 0dBm power can supply 3.3V constant voltage to 50$k{\Omega}$ load during 280sec.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.