• 한국정보통신설비학회:학술대회논문집
• /
• 2004.08a
• /
• pp.105-108
• /
• 2004

유비쿼터스 컴퓨팅에서 센서 네트워크는 상황인지를 위한 가장 기본적인 인프라 기술이다. 또한 기존의 네트워크를 이용하지 않고 독립적인 네트워크를 구성한다. 그러므로 센서 네트워크는 각자 독립적인 전력을 사용한다. 이러한 특성상 전력 소비의 문제가 가장 중요한 기술적 난제로 존재한다. 전력소비의 문제를 개선하기 위해서는 다양한 방법이 존재 한다. 네트워크를 형성하기위한 센싱정보의 효율적인 전송 방법이 필요하다. 본 논문에서는 상황정보를 표현하기 위한 방법을 제안하고 표현된 정보를 사용하여 RF 데이터 전송의 여부를 결정함으로써 전송에 따른 전력 소비를 효율적으로 추구한다.

• Journal of Satellite, Information and Communications
• /
• v.12 no.4
• /
• pp.146-151
• /
• 2017

This paper proposes a transmission algorithm that optimizes transmission power and sub-channel allocation to maximize energy efficiency considering characteristics of the channel impedance of power lines in power line communication systems. Since the received power at the receiver is influenced by the characteristics of the power line channel, it is necessary to consider channel characteristics when developing a transmission strategy in a power line communication systems. In addition, the energy efficiency should be optimized while meeting the practical constraints, such as the maximum transmission power limit of the transmitter and minimum quality of service for each user. In the computer simulation, we confirm that the energy efficiency of the proposed algorithm is improved compared to baseline schemes.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.8
• /
• pp.1798-1804
• /
• 2014

A novel inductive resonator for the implementation of wireless power transfer using resonant inductive coupling is presented. The proposed inductive resonator is much smaller than the helix shape resonator suggested by MIT research team but operates the same resonant frequency with comparable wireless power transfer efficiency. The proposed inductive resonator is a spiral shape ($1,696cm^3$), which is 97 % smaller than the helix shape ($59,376cm^3$). The wireless power transfer efficiency is less than 9 % when compared to the helix shape resonator. With the reduce size and comparable efficiency, this novel inductive resonator can be used in practical application of wireless power transfer.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.4
• /
• pp.187-192
• /
• 2017

Rigorous longitudinal modal transmission-line theory (L-MTLT) is applied to analyze maximum power transfer in asymmetric grating-assisted directional couplers(A-GADC). By defining a coupling efficiency amenable to rigorous analytical solutions and interference between symmetric and asymmetric supermodes, the power exchange of TE modes as a function of propagation distance is numerically evaluated. The numerical result reveals that maximum power transfer occurs at a grating period ${\Lambda}_{eq}$, in which the insertion loss of supermodes is equal to each other. That is, it is generally different from conventional phase-matching condition of GADC. Furthermore, as the asymmetric profile of grating change to symmetrical profile, the coupling length decreases and the coupling efficiency for power transmission increases.

• Journal of IKEEE
• /
• v.23 no.2
• /
• pp.747-750
• /
• 2019

Wearable devices have become practically indispensable to daily life and helped people track and manage fitness, health, and medical functions etc. As these wearable devices become smaller and more comfortable for the user, the demand for longer run time and charging ways presents new challenges for the power management engineer. Wireless power transfer (WPT) is the technology that forces the power to transmit electromagnetic field to an electrical load through an air gap without interconnecting wires. This technology is widely used for the applications from low power smart phone to high power electric railroad and main electrical grid. There are two kinds of WPT methods: Inductive coupling and magnetic resonant coupling. The model using magnetic resonant coupling method is designed for a resonant frequency of 13.45 MHz. In this study, the hardware implementations of these two coupling methods are carried out, and the efficiencies are compared.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2009.04a
• /
• pp.1359-1362
• /
• 2009

센서 네트워크의 저전력 단거리 무선통신의 특징을 의료분야에 적용한 의료용 네트워크(Medical Body Area Networks)는 사람의 인체를 진단하기 위한 소형 의료 디바이스들간의 연결성을 제공하기위해 최근 주목받고 있는 기술이다. 본 논문에서 제안하는 프로토콜은 MBAN에서 전력의 효율성 및 신뢰성에 초점을 맞추어 제안 하였다. IEEE 802.15.3의 MCTA를 MBAN에서 적용 가능한 SR-MCTA로 변형하여 전송의 신뢰성 및 전력 사용의 효율성을 고려한 프로토콜을 제안한다. 제안하는 프로토콜에서 SR-MCTA 슬롯은 단말 디바이스의 요청에 의해 MBAN 코디네이터가 할당하며, 할당하는 방법은 현재 슬롯에서 긴급 패킷이 발생할 때 임이의 충돌 패킷을 발생시켜 서 패킷을 획득하는 방법을 사용한다. 이를 위해 WBAN 네트워크내의 특정 노드를 클러스터의 헤드로 설정한다. 제안하는 프로토콜의 효율성 분석을 통하여 제안하는 방법이 전송의 지연 개선 및 에너지 효율적임을 보였다.

• The KIPS Transactions:PartC
• /
• v.13C no.2 s.105
• /
• pp.185-194
• /
• 2006

In this paper, we first propose a power-and-bandwidth efficient cooperative transmission protocol where a sensor node assists two others for their data transmission to a clusterhead in WSNs (Wireless Sensor Networks) using LEACH (Low-Energy Adaptive Clustering Hierarchy). Then we derive its closed-form BER expression which Is also a general BER one for the decode-and-forward protocol (DF) and Prove that the proposed protocol performs as same as the conventional DF but obtains higher spectral efficiency. A variety of numerical results reveal the cooperation can save the network power up to 11dB over direct transmission at BER of $10^{-3}$.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.7
• /
• pp.275-280
• /
• 2013

This paper presents an optimizing method for wireless charging system, specifically focused on the capsule endoscope applications. In order to increase the wireless power transfer efficiency of electro-magnetic resonance coupled coils, this paper investigates the impact factors of the power transfer efficiency in small battery capacity system and proposes a efficiency optimizing method based on frequency control. Simulation results show that the proposed efficiency optimal control method can effectively stabilize the wireless power transfer efficiency so as to successfully solve the main issue of transfer efficiency variation with distance and as well as parasitic element.

• Journal of Advanced Navigation Technology
• /
• v.24 no.6
• /
• pp.566-572
• /
• 2020

In a wireless power transmitter, the characteristics and effects of wireless power transmission between two induction coils are investigated, and a power converter circuit and a battery charger/discharger circuit using wireless power transmission technology are proposed. The advantage of wireless power transmitters and wireless chargers is that, instead of the existing plug-in-mounted wired charger (OBC; on-board charger), the user can wirelessly charge the battery without connecting the power source when charging power to the battery. There is. In addition, the advantage of wireless charging can bring about an energy efficiency improvement effect by using the secondary side rectifier circuit and the receiving coil, but the large-capacity long-distance wireless charging method has a limitation on the transmission distance, so many studies are currently being conducted. The purpose of the study is to study the transmitter circuit and receiver circuit of a wireless power transmission device using a primary coil, a secondary coil, and a half bridge series resonance converter, which can transmit power of a non-contact type power transmitter. As a result, a new topology was applied to improve the power transmission distance of the wireless charging system, and through an experiment according to each distance, the maximum efficiency (95.8%) was confirmed at an output of 3 kW at an 8 cm transmission distance.

• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.193-194
• /
• 2016

일반적으로 자기장을 이용하는 무선전력 전송 방식은 노이즈, 금속 영향성, 발열, 위치에 따른 에너지 효율이 달라지는 문제점을 가지고 있다. 본 연구에서는 전기장을 이용하여 자동차 전, 후면에 있는 유리를 통해 전기자동차를 무선으로 충전하는 컨버터를 제안한다. 송, 수신부 회로는 유리를 유전체로 만들어진 작은 커패시터와 Quality-factor (Q-factor)를 보상하기 위해 두 개의 변압기를 이용한 임피던스 변환과 스위칭 손실을 최소화하기 위한 LLC직렬공진 동작을 사용하였다. 그 결과 제안하는 컨버터는 대용량 전력전송과 소프트 스위칭을 통한 높은 효율을 얻을 수 있었다. 제안하는 회로의 동작과 특성을 검증하기 위하여 유리를 이용한 커패시터를 구성하고 1.2KW 송, 수신 회로를 설계 및 제작하여 검증 하였다.