• 한국정보통신설비학회:학술대회논문집
• /
• 2005.08a
• /
• pp.238-241
• /
• 2005

낙뢰 또는 전력선에 의해 가입자 통신선로에서 발생하는 유도전압을 측정하는데 있어 기존에는 특정 개소에서 다양한 측정기를 활용하여 측정하여 왔다. 본 논문에서는 전력선에 의한 상시유도전압, 이상시유도전압, 잡음전압 등을 24시간 감시하고 낙뢰 발생시에 나타나는 유도전압 등을 측정할 수 있는 저가의 단말장치를 개발하고 전국 여러 지역에 동시에 설치하여 실시간으로 측정데이터를 중앙관리서버로 전송하여 통신선로에서 발생하는 유도전압을 통계적으로 처리하고 관리할 수 있는 측정시스템 구축에 관한 결과를 보였다.

• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.228-229
• /
• 2013

원자력발전소, 병원 및 철도와 같이 지속적인 전력공급이 필요한 시설에서는 IT접지시스템의 적용이 활발해지고 있다. 또한 자가발전을 통한 DC배전계통에서 IT접지시스템이 사용될 것으로 예측되고 있다. 이러한 IT접지시스템은 전력선의 어느 쪽도 접지하지 않으며, 장비의 외함 만을 접지함으로써 전력선의 어느 한쪽이 접지되는 사고를 당하더라도 계통의 운전을 정지시키지 않고 고장부위를 찾을 수 있는 시간적 여유가 있으므로, 계통의 연속적인 운전을 확보할 수 있다. 그러나 이러한 접지의 장점을 얻기 위해서는 계통의 운전 중에 전력선의 상태를 지속적으로 감시할 필요가 있다. 본 연구에서는 사용자의 활용도가 높은 LabVIEW 소프트웨어를 이용하여 절연저항을 모니터링 함으로써 전력선의 절연상태를 지속적으로 감시하는 활선절연저항측정기를 개발한다.

• Proceedings of the IEEK Conference
• /
• 2003.07c
• /
• pp.2867-2870
• /
• 2003

저전력형의 거리 및 속도측정기를 구현하였다. 매우 짧은 펄스의 높은 분해능을 요구하는 기기의 특성을 구현하기 위하여 측정 펄스를 White Noise가 인가된 신호를 이용하여 구현하였으며, 1초 내에 속도 및 거리가 측정되도록 하였다. 실제로 3-400m정도에서 사용되는 경우가 많으나 LASER의 신호로 2-3km연장가능 하도록 하여 여러 방면에 사용되도록 하였다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2012.06a
• /
• pp.50-51
• /
• 2012

The final purpose of this study is to develop a hybrid ocean power generation system which has innovate and very high efficiency performance, and which can be operated on both emergency and normal conditions. So, A survey on the electricity power consumption of residential areas at island on south coast.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2011.11a
• /
• pp.136-137
• /
• 2011

The final purpose of this study is to develop a hybrid ocean power generation system which has innovate and very high efficiency performance, and which can be operated on both emergency and normal conditions. So, A survey on the electricity power consumption of residential areas at island on south coast.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.779-781
• /
• 2011

Drinking is one of most prominent causes for social problems like domestic violence, drinking and driving, and health problems. If who drunken can check promptly how much blood alcohol content, abstain from drunken driving or successive drinking schedule. In this paper, implementation of digital portable breathalyzer using semiconductor gas sensor based on MEMS were suggested. A small size micro controller with low power and surface mountable, ATMEGA48 can control semiconductor gas sensor digitally and display the value of alcohol concentration on LED.

• Journal of Sensor Science and Technology
• /
• v.9 no.2
• /
• pp.120-126
• /
• 2000

This paper dealt with the developed portable electric field meter which consisted of planar-type sensor, analog amplifier with gain controller, A/D convertor, and display unit. The principle of the planar-type sensor for detecting time-varying electric field of extremely low frequency (ELF) bandwidth was described, and a calibration system using cylindrical guard electrodes and parallel-plate electrodes was proposed. From the calibration experiment, the frequency bandwidth and the sensitivity of the developed electric field meter was $17[Hz]{\sim}7[kHz]$, and 4.45[mV/V/m], respectively. Also it can measure the electric field strength up to 10[kV/m], and the measured result was displayed on the liquid crystal display in digit. The electric field meter can be widely applied to measure electric field strength radiated from power lines, computers, and home appliances such as hair dryer, heater, etc.

• Journal of IKEEE
• /
• v.2 no.1 s.2
• /
• pp.53-60
• /
• 1998

We develope a high repetition rate, short distance, optical range finder for surface roughness measurements of large structures, such as a highway road, etc. For range measurement based on a triangulation principle, we use a light emitting diode and an one dimensional Position sensitive photodetector for a light source and an angle detector of the reflected light at the object, respectively. The range finder has automatic power control and electrical background noise rejection capabilities which enable it to overcome variations of an object reflectance and to eliminate time-varying, as well as constant, background light noises. Our experimental results show less than ${\pm}1.5mm$ of measurement errors regardless of an object reflectance, for $22{\sim}38cm$ object ranges which are determined by considering the installation of the range finder and the depth of surface roughness.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.12
• /
• pp.8306-8313
• /
• 2015

Open-type current sensors have been commonly used for DC motor controller, AC variable controller and Uninterruptible Power Supply. Recently they have begun to be used more widely, as the growth of renewable energy and smart-grid in power system. Considering most of the open-type current sensors are imported, developing the core technology needed to produce open-type current sensors is required. This paper describes the development and test results of open-type current sensors. Design of C type magnetic core, selection and test of a Hall sensor, design of current source circuit and signal conditioning circuit are described. 100A class DIP(Dual In-line Package) type and SMD(Surface Mount Devide) type open-type current sensors was made and tested. Test results show that the developed open-type current sensor satisfies the accuracy requirement of 2% and linearity requirement of 2% at 100 A of DC and AC current of 60Hz. Temperature compensation was carried out by using a temperature compensation circuit with NTC(Negative Temperature Coefficient) thermistor and the effect of the temperature compensation are described.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.4
• /
• pp.41-46
• /
• 2005

In this paper, a new method for suppressing microwelding on the RF MEMS (Radio Frequency Microelectromechanical System) direct contact switches is introduced. Two kinds of refractory metals, tungsten and molybdenum were coated onto the contact point of the switches and the effect of the coating was examined. The changes in insertion loss and isolation at the switch were measured by using network analyzer and power loss was evaluated by power measurement. The results revealed that while tungsten and molybdenum showed higher contact resistance than gold in low input power range, they enhanced the power handling capability and reliability of the switches in high input power region.