• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.10
• /
• pp.2293-2302
• /
• 2012

New optical transmission links technique for compensating of the distorted wavelength division multiplexed (WDM) signals due to group velocity dispersion (GVD) and self phase modulation (SPM) in single mode fiber (SMF) are proposed. The proposed optical links have optical phase conjugator (OPC) placed at nearby WDM transmitter or receiver and repeater spans with artificial distribution of SMF length and residual dispersion per span (RDPS). It is confirmed that optimal link configuration expanding effective launching power range and effective net residual dispersion (NRD) by improving system performance is that having OPC closely placed at WDM receiver and the gradually descended distribution of SMF length and RDPS of each repeater spans, related with the gradually increased optical link length. And, it is also confirmed that NRD is controlled by postcompensation in optimal optical link with OPC closely placed at WDM receiver.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.1023-1026
• /
• 2013

The electronic equipment which was exposed to high level pulsed radiation is damaged as Upset, Latchup, and Burnout. Those damages has come from the instantaneous photocurrent from electron-hole pairs generated in itself. Such damages appeared as losses of power in military weapon system or of blackout in aerospace equipment and eventually caused in gross loss of national. In this paper, we have implemented a RDC(Radiation detection and control module) as part of the radiation protection technology of the electronic equipment or devices from the pulsed gamma radiation. The RDC which is composed of pulsed gamma-ray detection sensor, signal processors, and pulse generator is designed to protect the important electronic circuits from the pulse radiation. To verify the functionality of the RDC, LM118s which had damaged by the pulse radiation were tested. The test results showed that the test sample applied with a RDC was worked well in spite of the irradiation of the same pulse radiation. Through the experiments we could confirm that the radiation protection technology implemented with RDC had the functionality of radiation protection to the electronic devices.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.666-668
• /
• 2015

Recent domestic IoT (Internet Of Things) technologies and research is being actively conducted, it actually provides power control, heating control such services in the home or office. Depending on the interest of the IoT so as to provide convenient services to users also increased their users are increasingly questioning or wondering about the operation of IoT system. The system representing an easy to understand the operation of the IoT system is required in order to meet the requirements of those users. For this purpose this paper, Swing utilization by user, sensor, SNS (Social Network Service) when an event occurs, such as the relationship between devices bearing the collaboration process can be monitored with a simulation program was designed and implemented.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.854-856
• /
• 2014

Has been released of make it possible to control the using for smart devices of a wide variety home appliances and electronics in smart appliances in accordance with the one person multi devices. In addition, is increasing rapidly for the number of the product on cleaning robot and refrigerator, air conditioning, TV, etc. these devices are using the implement up DLNA system. And at home and abroad for development and has provided with Iot and Alljoyn such systems. But currently using home appliances or electronic devices of there are a lot of the operating system non installed than the installed products. In addition, smart appliances do not use for user than buying existing electronic products a lot more. In addition, more occur for smart appliances of that do not use for the user on smart appliances rather than buying existing electronics. In this paper, Suggested and implemented for system of control such as smart devices to existed home appliance on not have an operating system, Using mobile device for want users to quantify the data to transfer from arduino board.

• KIPS Transactions on Computer and Communication Systems
• /
• v.8 no.8
• /
• pp.201-208
• /
• 2019

Intra-Body Communication (IBC) is a communication method using the human body as a communication medium. The fact that our human body consists of water and electrolyte allow such communication method could work and have strength in low-power. However, because the IBC directly affects to human body by using it as a medium, there was a lack of research in communication protocols of each communication layer. In this paper, we suggests MAC parameters which affects the performance of communication in human body channel, and propose new MAC protocol. Our results shows that our MAC is suitable for supporting high data rate applications with comparable radio duty cycle performance.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.6
• /
• pp.897-906
• /
• 2022

In this paper, we propose a novel MAC protocol based on the harmonic transmission of ACK, called HAT-LoRa, for improving the reliability and the utilization in multiple gateway LoRa Networks. LoRa is basically vulnerable to collision due to the primitive pure ALOHA-like MAC. Whereas data frame delivery can be guaranteed by the transparent bridge of multiple receiving gateways, ACK is still transmitted by a single gateway in LoRa Network. HAT-LoRa provides the augmented reception opportunity of ACK via the simultaneous transmissions of identical ACK in multiple spreading factors. The proposed method reduces the expected transmission times of ACK double gateway environment as well as single gateway environment, by 55 and 60% in maximum, by 35% and 40% in average, in a single- and double-gateway environment, respectively. Especially, it outperforms under the environment where the distance between end device and gateways are similar to each other.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.1
• /
• pp.48-56
• /
• 2006

This paper studies particularly applicable method for sensorless PM BLDC motor drive system. The waveform of the motor internal voltages(or back emf) contains a fundamental and higher order frequency harmonics. Therefore the third harmonic component is extracted from the stator phase voltage. The resulting third harmonic signal keeps a constant phase relationship with the rotor flux for any motor speed and load condition. Also because of low resolution of estimated signal obtained by the proposed sensorless algorithm, to improve the wide range of speed response characteristic more exactly, we propose the rotor position signal synthesizer using PLL circuit based on estimated signals. Some experimental results are provided to demonstrate the validity of the proposed control method.

• Journal of the Korea Society of Computer and Information
• /
• v.9 no.1
• /
• pp.63-70
• /
• 2004

This paper describes modeling, design and performance test results of infrared thermal image target system which can generate infrared thermal image on aircraft. The system is designed to control image shape and intensity so that the infrared image shape and its emitting intensity are so similar to that of real aircraft. When applying the technique suggested in this paper, the system consumes only small electric power energy about 30(㎾) to generate infrared thermal image which is equivalent to that of real aircraft under full power operation. After verifying performance test, the system developed here has been used as a target for korean potable surface to air missile(KPSAM) at the stage of evaluation test such as target adaptive guidance test and auto-pilot logic test.

• Annual Conference of KIPS
• /
• 2017.04a
• /
• pp.1153-1156
• /
• 2017

이 논문에서는 투자비용 감소를 위해 라즈베리파이와 아두이노로 구현한 IoT 플러그를 제안한다. 기존 연구에서는 노후화된 시설에 대해 큰 비용이 발생하며, 전력소모량을 측정하는데 오차가 있다. 노후 시설에 대한 투자비용을 줄이기 위해 가격이 저렴한 라즈베리파이와 아두이노를 이용하여 IoT 플러그를 구현한다. 라즈베리파이 상에 서버를 구현하고 사용자와 nodeMCU 사이의 통신을 담당한다. nodeMCU는 릴레이모듈과 스위치에 연결되어 자동/수동으로 전원을 제어할 수 있다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.10c
• /
• pp.250-252
• /
• 2003

휴대폰, PDA 등의 대중화에 따라 원격에서 영상을 통해 대상의 상태를 확인하고자 하는 욕구가 증가하였고, 웹 카메라의 보급에 의한 영상 멀티미디어 기술의 대중화는 소프트웨어적인 영상 처리가 가능한 홈 원격화상 감시 솔루션의 개발을 가능하게 하였다. 기존의 화상 전송 시스템은 설치되어 있는 모든 카메라의 동화상을 처리하여 전송함으로써 시스템의 자원을 소모하였고, 모바일 기기에서의 화상 재생에 대한 고려가 되어있지 않았으며, 카메라 수의 확장이 어려웠다. 본 논문에서는 이에 따른 해결 방안으로 클라이언트에서의 동화상 재생에 필요한 웹 카메라를 선택하여 동화상의 처리 및 전송을 함으로써 시스템의 자원 소모를 줄일 수 있고, 모바일 기기에서의 동화상 재생에 최적화된 화질의 화상을 전송할 수 있으며, 버퍼 사용의 최소화로 실시간 전송 및 재생이 가능한 실시간 화상 전송 서버를 설계 및 구현하였다. 구현된 시스템은 가정. 학교와 같은 특정 장소의 영상 감시와 산업용 기기인 통합 전력 감시 시스템. 분산 제어 시스템 등에 적용할 수 있다.