• KIPS Transactions on Computer and Communication Systems
• /
• v.3 no.5
• /
• pp.151-154
• /
• 2014

An energy of applications had consumed through the complexed inter-action with operating systems, run-time environments, compiler, and applications on various mobile devices. In these days, challenged researches are studying to reduce of energy consumptions that uses energy-oriented high-level and low-level compiler techniques on mobile devices. In this paper, we intented to reduce an energy consumption of Java mobile applications that applied a list instruction scheduling for energy dissipation from dalvik bytecode which extracted Android dex files. Through this works, we can construct the optimized power and energy environment on mobile devices with the limited power supply.

• Journal of KIISE:Computer Systems and Theory
• /
• v.27 no.11
• /
• pp.908-918
• /
• 2000

캐쉬의 성능을 향상시키는 가장 효과적인 방법은 프로그램 수행 특성에 내재되어 있는 시간적 (temporal locality) -공간적 지역성 (spatial locality)을 활용하는 것이다. 본 논문에서는 추가적인 장치나 컴파일러의 도움 없이 단지 캐쉬의 구조적인 특징과 간단한 메커니즘만을 이용하여 두 가지 타입의 지역성을 효과적으로 반영할 수 있는 새로운 캐쉬 시스템이 제안된다. 제안하는 새로운 캐쉬 시스템은 다른 블록 크기와 다른 연관도를 가지는 두 개의 캐쉬로써 구성되어 진다. 즉 작은 블록 크기를 지원하는 직접사상 캐쉬 (direct-mapped cache)와 큰 블록을 지원하는 완전 연관 버퍼 (fully-associative buffer)로 구성되어 진다. 큰 블록은 여러 개의 작은 블록으로 구성되어지며 두 캐쉬에서 접근 실패가 발생할 경우 직접사상 캐쉬의 접근 실패가 발생한 작은 블록과 그 이웃 작은 블록을 완전 연관 버퍼에 저장시킴으로써 한번 참조가 일어난 블록의 이웃 블록이 참조될 확률이 높다는 공간적 지역성의 특성을 효과적으로 반영할 수 있다. 또한 참조가 일어난 블록은 제어 비트를 사용하여 선택적으로 작은 블록을 직접사상 캐쉬에 저장함으로써 시간적 지역성을 보다 효과적으로 사용할 수 있다 시뮬레이션 결과에 따르면 기존의 직접사상 캐쉬의 4배 크기보다도 좋은 성능 향상을 보이고 있으며, 동일한 크기의 victim 캐쉬보다 우수한 성능을 보이고 소비 전력 면에서는 5% 정도의 전력 감소를 보이고 있다.

• Journal of Satellite, Information and Communications
• /
• v.1 no.2
• /
• pp.38-44
• /
• 2006

The COMS(Communication, Ocean & Meteorological Satellite) is the geostationary satellite which will be performing three main objectives such as meteorological service, ocean monitoring and Ka-band satellite communications. In order to accomplish these missions, the COMS system needs to implement a specific electrical/mechanical interface functions which are requested by each payload units. This paper describes a on-board interface hardware design for COMS Meteorological Imager(MI). The Meteorological Imager Interface Unit(MI2U) achieves, through MIL-STD-15533 system bus, the interface between the Spacecraft Computer Unit(SCU) and the instrument which is dedicated to MI. MI2U provides a necessary power input to MI from +50V Power Supply Regulator(PSR), and allows adaptation of the specific payload interfaces and protocol to COMS spacecraft.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.2
• /
• pp.417-426
• /
• 2000

In this paper, CE-CPSK(Constant Envelope Continuous Phase Shift Keying) modulated DS/SS(Direct Sequence Spread Spectrum) transceiver with 908 MHz carrier frequency and 1.5 MHz PN clock rate is proposed. To overcome the effect of nun-linear power amplifier, CE-CPSK modulation method which has the constant envelope and continuous phase characteristics is proposed. To analyze the DS/SS receiver performance with respect to code tracking loop, multipath fading channel is characterized as a two-ray Rayleigh fading channel. To compensate the demerit of analog delay locked loop, digital delay locked loop is employed for code tracking loop. Simulation and experimental examination has been carried out in AWGN(Additive White Gaussian Noise) and Rayleigh fading channel environment in order to prove validity of the proposed method.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.3
• /
• pp.565-570
• /
• 2012

This paper has proposed a multi-channel low pass filter (LPF) for LTE-Advanced systems. The proposed LPF is an active-RC 5th chebyshev topology with three cut-off frequencies of 5 MHz, 10 MHz, and 40 MHz. A 3-bit tuning circuit has been adopted to prevent variations of each cut-off frequency from process, voltage, and temperature (PVT). To achieve a high cut-off frequency of 40 MHz, an operational amplifier used in the proposed filter has employed a PMOS cross-connection load with a negative impedance. A proposed filter has been implemented in a 0.13-${\mu}m$ CMOS technology and consumes 20.2 mW with a 1.2 V supply voltage.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.179-182
• /
• 2008

This paper deals with the isolated DC-DC converter with high efficiency using the minimum reactor. In this paper, the proposed convert uses the air core reactor for ZCS(zero currunt switching) which can minimize the core losses and removes the over switching losses by soft switching. The proposed converter is verified by the modes analysis and computer simulation to prove the theoretical background and adequacy.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.10
• /
• pp.1830-1834
• /
• 2008

At the present day, devices for measurement and control of data by wireless based computer have been generalized. The devices with low cost and high performance have been spotlighted. If Zigbee communication solution is used in dangerous places and places that can not in use wire communication, computer can process data without limitation. Zigbee communication solution is effective in power consumption as compared with RF or bluetooth and can use battery. System cost of Zigbee also is very low, so can install lots of nodes. The system made in this paper transmit by wireless many LMCs(Laser Measuring Control) of wireless transmission system for distance measurement and many slave Zigbee to a master Zigbee.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.712-714
• /
• 2016

The PS algorithm divides the tags within the identification range of reader into smaller groups by increasing the transmission power incrementally and identifies them. In 13.56MHz RFID system of Auto-ID center, STAC protocol is defined as an anti-collision algorithm for multiple tag reading. In this paper, we propose a STAC/PS algorithm that the PS algorithm is applied in the STAC protocol. The simulation results show that the STAC/PS algorithm can achieve faster tag identification speed compared with STAC protocol due to the low collision rate.

• Annual Conference of KIPS
• /
• 2011.11a
• /
• pp.654-657
• /
• 2011

Gartner에 따르면 현재 IT산업에서 배출하는 Co2의양은 전 세계 배출량의 2%에 해당하고, 국내 IT기기의 탄소 배출량은 1,750만톤, 2012년에는 2,110만 톤으로 증가할 것으로 예상하고 있다. 이 중 전 세계 기업의 전산설지 전력 소비량은 1척억kWh가 소모되고 있으며, 서버의 전력소모량은 매년 20%씩 증가할 것으로 보고 있다. 또한 IT 시설물은 이산화탄소가 배출되는 7%의 가장 높은 비율을 차지하고 있다. 이에 따라 에너지 경비 절감 및 효율성을 높이고 탄소 배출량 감소를 위한 기술 및 솔루션 개발을 위한 그린 IT기술의 필요성이 높아지고 있다. 이러한 IT 시설물의 에너지 사용량을 실시간으로 확인, 온 습도 센서를 통한 자료 분석을 통하여 대상시설에 맞는 탄소배출량을 환산하여, 이를 활용한 에너지 시설의 제어를 통해 탄소배출과 경비를 절감시키는 시스템이 스마트탄소 통합관제시스템이다. 그리하여 본 논문에서는 통신 프로토콜 단에서부터 '관제'시스템의 성격에 맞고, 저장소의 공간을 효율적이고, 탄소 배출량을 감축시키는데 일조하는 스마트탄소 통합관제시스템의 프로토콜을 설계하고, 이를 테스트 하였다.

• 전자공학회논문지 IE
• /
• v.46 no.4
• /
• pp.57-65
• /
• 2009

This paper presents the image contrast enhancement technique suitable for local dimming backlight of small-sized mobile display while achieving the reduction of the power consumption. In addition to the large-sized TFT-LCD, small-sized one has adopted LED for backlight. Since, conventionally, LED was mounted on the side edge of a display panel, global dimming method has been widely used. However, recently, new advanced method of local dimming by placing the LED to the backside of the display panel and it raised the necessity of sub-blocked processing after partitioning the target image. When the sub-blocked image has low brightness, the supply current of a backlight LED is reduced, which gives both enhancement of contrast ratio and power consumption reduction. In this paper, we propose simple and improved image enhancement algorithm suitable for the small-sized mobile display. After partitioning the input image by equal sized blocks and analyzing the pixel information in each block, we realize the primary contrast enhancement by independently processing the sub-blocks using the information such as histogram, mean, and standard deviation values of luminance(Y) component. And then resulting information is transferred to each backlight control unit for local dimming to realize the secondary contrast enhancement as well as reduction of power consumption.