• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.1
• /
• pp.149-156
• /
• 2008

Recently, ozone is utilized in various fields and its needs are expanding. In this paper, plate type ozonizer have been fabricated to investigate discharge parameter(input power, flow rate of supplied gas, electrode form, etc.) effect to discharge. And the conditions of discharge parameter have been investigated for optimum ozone generation. Ozone concentration is continuously increased with increasing input power for same discharge space, and ozone yield is also increased until maximum point after that it is saturated. Ozone concentration is inversely proportional to flow rate of supplied gas but ozone generation and ozone yield characteristics are improved.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.16 no.2
• /
• pp.47-56
• /
• 2008

The objective of this research is to evaluate the optimum recycling methods for the sewage sludge cakes at different microwave power-settings and for different periods of time. The dehydrated sewage sludge cakes used in this study was obtained from N wastewater treatment plan in the P City. The beginning drying processes were carried out in a microwave oven with 2,450 MHz frequency and power ranges of 1kW to 4 kW. The continuous conveyer drying system was also operated with 2,450 MHz frequency and power setting, ranging from of 1 kW to 6 kW. Initial moisture content of the sewage cake is 78~80%, and the moisture content decreased rapidly up to 0.2~2(wt%) within short periods due to breaking the cell walls. This study is also conducted to evaluate the characteristics of sewage sludge cakes with respect to important physical parameters effect on the thermal kinetics for evaporation water in the sludge which are operation times, moisture contents, drying rates, input amounts, flow rates and calorific values. It takes 60 minutes and 120 minutes to reach the critical moisture contents with power setting of 4 kW for 3kg/min and 6kg/min of the flow rates respectively. It takes 120 minutes and 110 minutes to reach the critical moisture contents with flow rates of 2.5 cm/min and sludge input of 6kg/min for the power settings of 4 kW and 6 kW respectively. The most effective value of the power for drying the sludge is 4 kW. Operation with 6kg/min and 4kW on 2cm of the sludge thickness can be effectively and inexpensively to reach the critical moisture contents, when you compare 2cm of the sludge thickness with 1cm and 3cm of the sludge thickness.

• Applied Chemistry for Engineering
• /
• v.20 no.4
• /
• pp.423-429
• /
• 2009

The purpose of this study is to investigate the optimal condition for the hydrogen-rich gas production and the CO removal by reforming of gliding arc plasma reforming system using biogas. The parametric screening studies were carried out according to changes of steam feed amount, catalyst bed temperature in water gas reactor and catalyst bed temperature, input air flow rate in preferential oxidation reactor. The standard condition is as follows. The steam/carbon ratio, catalyst bed temperature, total gas flow rate, input electric power and biogas composition rate ($CH_4$ : $CO_2$) were fixed 3, $700^{\circ}C$, 16 L/min, 2.4 kW and 6 : 4, respectively. The results are as follow, HTS optimum operating conditions were S/C ratio of 3 and reactor temperature of $500^{\circ}C$. LTS were S/C ratio of 2.9 and temperature of $300^{\circ}C$. Also, PROX I optimum conditions were input air flow rate of 300 mL/min and reactor temperature of $190^{\circ}C$. PROX II were 200 mL/min and $190^{\circ}C$ respectively. After having passed through each reactor, the results were as follows: 55% of $H_{2}$ yield, 0% of CO selectivity, 99% of $CH_4$ conversion rate, 27% of $CO_2$ conversion rate, respectively.

• Proceedings of the Korean Information Science Society Conference
• /
• 2001.04a
• /
• pp.37-39
• /
• 2001

반도체 설계는 급속한 기능 추가와 기가 헬쯔에 육박하는 고속 동작에 부응하는 제품의 설계와 빠른 출시를 위하여 다방면의 연구를 거듭하고 있다. 하지만, 인터넷과 정보 가전의 모바일 기기에서 요구하는 폭발적인 기능의 추가와 가전기기의 최소화를 위하여서는 그 요구를 감당하지 못하고 있다. 이를 위한 방안으로 설계 재활용과 System-On-Chip의 설계가 수년 전부터 대두되었으나 아직 큰 실효를 거두지 못하고 있다. SoC설계는 다기능을 한 칩에 구성하는 방법을 시도하고 있고, 설계 재활용은 기존의 설계(IP)를 다른 것과 혼합하여 필요한 기능을 제공하는 방법이 시도되고 있다. 이 두가지의 VLSI 설계 방식 흐름을 가능하도록 하기 위한 연구로써, 레이아웃 이식에 관한 연구를 진행하였다. IP 재활용을 위하여서는 다양한 공정변화에 신속히 대응하고, 기존의 설계 설계규칙으로 설계된 면을 현재의 공정인 0.25um, 0.18um 테크놀러지에 맞도록 변환하는 VLSI 소프트웨어 시스템을 필요로 한다. 레이아웃 설계도면을 분석하여 소자 및 배선을 인식하는 알고리즘을 연구와 개발하고, 도면을 첨단 테크놀러지의 설계 규칙에 부응하도록 타이밍, 소비 전력, 수율을 고려한 최적의 소자 및 배선의 크기를 조절하는 방법을 고안하며, 칩 면적을 최적화할 수 있는 컴팩션 알고리즘을 개발하여 레이아웃 설계 도면을 이식할 수 있는 자동화 소프트웨어 시스템을 연구하였다. 더불어, 현재 반도체 소프트웨어 시스템의 최대 문제점에 해당하는 처리 속도와 도면의 처리 능력을 비교, 검토하여 본 연구가 속도면에서 평균 27배 효율면에서 3배 이상의 상대우위를 점하였다.전송과 복원이 이루어질 것이다.하지 않은 경우 단어 인식률이 43.21%인 반면 표제어간 음운변화 현상을 반영한 1-Best 사전의 경우 48.99%, Multi 사전의 경우 50.19%로 인식률이 5~6%정도 향상되었음을 볼 수 있었고, 수작업에 의한 표준발음사전의 단어 인식률 45.90% 보다도 약 3~4% 좋은 성능을 보였다.으로서 hemicellulose구조가 polyuronic acid의 형태인 것으로 사료된다. 추출획분의 구성단당은 여러 곡물연구의 보고와 유사하게 glucose, arabinose, xylose 함량이 대체로 높게 나타났다. 점미가 수가용성분에서 goucose대비 용출함량이 고르게 나타나는 경향을 보였고 흑미는 알칼리가용분에서 glucose가 상당량(0.68%) 포함되고 있음을 보여주었고 arabinose(0.68%), xylose(0.05%)도 다른 종류에 비해서 다량 함유한 것으로 나타났다. 흑미는 총식이섬유 함량이 높고 pectic substances, hemicellulose, uronic acid 함량이 높아서 콜레스테롤 저하 등의 효과가 기대되며 고섬유식품으로서 조리 특성 연구가 필요한 것으로 사료된다.리하였다. 얻어진 소견(所見)은 다음과 같았다. 1. 모년령(母年齡), 임신회수(姙娠回數), 임신기간(姙娠其間), 출산시체중등(出産時體重等)의 제요인(諸要因)은 주산기사망(周産基死亡)에 대(對)하여 통계적(統計的)으로 유의(有意)한 영향을 미치고 있어 $25{\sim}29$세(歲)의 연령군에서, 2번째 임신과 2번째의 출산에서 그리고 만삭의 임신 기간에, 출산시체중(出産時體重) $

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.9A
• /
• pp.702-709
• /
• 2003

In this paper, we propose an efficient and QoS-aware MAC scheduling algorithm for Bluetooth, which considers both throughput and delay performance of each Master-Slave pair in scheduling decisions, and thus, attempts to maximize overall performance. The proposed algorithm, MTDPP (Modified Throughput-Delay Priority Policy), makes up for the drawbacks of T-D PP (Throughput-Delay Priority Policy) proposed in [6] and improves the performance. Since Bluetooth employs a master-driven TDD based scheduling algorithm, which is basically operated with the Round Robin policy, many slots may be wasted by POLL or NULL packets when there is no data waiting for transmission in queues. To overcome this link wastage problem, several algorithms have been proposed. Among them, queue state-based priority policy and low power mode-based algorithm can perform with high throughput and reasonable fairness. However, their performances may depend on traffic characteristics, i.e., static or dynamic, and they require additional computational and signaling overheads. In order to tackle such problems, we propose a new scheduling algorithm. Performance of our proposed algorithm is evaluated with respect to throughput and delay. Simulation results show that overall performances can be improved by selecting suitable parameters of our algorithm.

• Journal of Advanced Navigation Technology
• /
• v.9 no.1
• /
• pp.71-78
• /
• 2005

Nowadays, the demand of HPI(High-speed Portable Internet) has been gradually increased to support the various services of high speed wire line internet such as xDS. HPI can support high speed internet in anyplace, anytime. For successful development of HPI, the performance should be evaluated according to the cell size and/or the number of users and cell design should be carried out based on these criteria. The previous cellular systems using CDMA technique focus on the establishment of link based on power control but HPI systems consider the QoS (Quality of Service) and its performance based on the scheduling technique. The results from the system level simulation show that the throughput is sensitive to the cell size and the number of users has little impact on it. Moreover, the variation of service delay is more sensitive to the number of users but less to the cell size.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.5
• /
• pp.80-87
• /
• 2009

Recently, ozone has been utilized in various fields thanks to its effectiveness, and has been in ever-growing demand. Accordingly, various kinds of ozonizers have been examined among researchers. This paper is concerned with developing the cascade-type plate electrode ozonizer(PTO) for improvements of indoor air, water supply and drainage and investigating its characteristics. Four types of ozonizers have been devised according to their size, numbers and arrangement Electric discharge area of each type of ozonizer has the same size of 22,400[$mm^2$], and its discharge power has the maximum 40[w]. As the result of having studied ozone generation ozone concentration and ozone yield characteristics of each ozonizer, we found that the type of ozonizer in which eight plates were arranged into cascade type(PTO-4) was the most excellent one.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.217.1-217.1
• /
• 2014

반도체 및 디스플레이 산업은 많은 공정들에서 저온 플라즈마 반응을 이용한다. 특히 소자 제작을 위한 실리콘 박막의 증착은 저온 플라즈마 공정의 주요 공정이다. 하지만 실리콘 박막을 합성하는데 있어서 저온 플라즈마에서 형성되는 실리콘 나노 입자는, 오염입자로써 박막의 특성을 악화시켜 소자생산 수율을 악화시키는 주요 원인이 되고 있다. 따라서 플라즈마에서 입자 형성의 원인이 되는 화학반응 및 입자들의 성장 매커니즘에 대한 연구는, 1980년대 플라즈마 공정에서 입자 합성이 보고된 이래 공정의 최적화를 위해 꾸준히 연구되어왔다. 이러한 매커니즘의 연구들은, 플라즈마 화학반응에 의해 실리콘 입자 핵을 만들어 내는 과정과 입자들이 충돌에 의해 성장해가는 과정으로 나눠진다. 플라즈마 화학 반응 과정은 아레니우스 방정식에 의해 정의된 반응계수를 이용하여 플라즈마 내 전자와 이온, 중성 화학종들이 전자 온도와 전자 밀도, 챔버 온도 등에 의해 결정되는 현상을 모사한다. 또한 이 과정에서 실리콘을 포함하는 화학종들의 반응에 의해 핵이 생성 되가는 양상을 모사한다. 생성된 핵은 충돌에 의해 입자가 성장해 가는 과정의 가장 작은 입자로써 이용된다. 입자들이 성장해가는 과정은 입자들이 서로 충돌하면서 다양한 입경의 입자로 분화되어가는 현상을 모사한다. 이 과정에 의해 다양한 입경분포로 분화된 입자들은 플라즈마 내 전자에 의해 하전되며, 이러한 하전 양상은 입경에 따라 다른 분포를 보인다. 본 연구에서는 입자의 하전 분포를 고려하여, 입자들의 성장의 주요 원인인 입자간의 충돌을 대표하는 충돌주파수를 수정하는 방식을 채택하여 보다 정밀한 입자 성장 양상을 모델링하였다. Inductively coupled plasma (ICP) 타입의 저온 플라즈마 반응기에서 합성된 입자들을 Particle Beam Mass Spectrometer (PBMS)와 Scanning Electron Microscope (SEM)를 이용하여 입경분포를 측정한 데이터와 모델링에 의해 계산된 결과를 비교하여 본 모델의 유효성을 검증하였다. 검증을 위해 100~300 mtorr의 챔버 압력 조건과 100~350 W의 입력 전력 조건들을 달리하며 측정한 결과와 계산한 데이터를 조건별로 비교하였다.

• Journal of KIISE:Computing Practices and Letters
• /
• v.14 no.4
• /
• pp.436-440
• /
• 2008

In IEEE 802.15.4 beacon-enabled mode, performance decreases as the number of devices competing in the contention access period(CAP) increases. In this letter, we propose partitioned contention access mechanism(PCAM) to compensate performance degradation. In PCAM, the PAN coordinator divides CAP into two sub-periods and activity of devices is delimited in their assigned sub-periods. Since PCAM reduces the number of devices which compete at the same time by half, collision probability between transmitted frames can be reduced. In addition, devices can save their power consumption because PCAM shorten the duration that devices stay in active state into half. We perform simulations to compare the performance of PCAM with that of the IEEE 802.15.4 standard. From the result, PCAM yields better performance than IEEE 802.15.4 standard.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.11
• /
• pp.1046-1053
• /
• 2010

The objective of this study was to investigate the pyrolytic reaction characteristics of a mixed fuel of municipal solid wastes and low-grade anthracite. The reaction variables are pyrolysis condition of mixing ratio, reaction temperature, temperature increase rate. As a result, the optimum mixing ratio was 20 wt.% low-grade anthracite in MSW, which maintains for the low heating value over 3,500 kcal/kg on pyrolysis. The most high reaction velocity constant was shown at $700^{\circ}C$. Also, under the all experimental condition, the reaction velocity constant increased linearly as temperature rate increase, but pyrolysis has to be considered electric power cost and yield of char at lower temperature rate.