• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.3
• /
• pp.1388-1392
• /
• 2013

Electric scooter has been using short-lived, low-efficiency DC motor. And motor control system is equipped with imported uniformly, so there is no product differentiation. Also, product design according to the characteristics of disability is difficult. In this study, BLDC motor control system to specialize in a electric scooter for disabled was developed with a semi-permanent features of life, low price, and high performance. This development will also contribute to the activation of the related industries, as well as be able to secure price competitiveness of domestic electric scooter.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1733_1734
• /
• 2009

직립식 전동 스쿠터는 전동기를 이용한 근거리 이동 수단으로 일종의 1인용 스쿠터이다. 현재 여러가지 마이크로프로세서를 이용하여 주행을제어하는 직립식 전동 스쿠터가 개발되고 있다. 본 연구에서는 PIC16F877A와 자이로 및 가속도 센서를 이용하여 스쿠터의 운행 시 안정성을 개선할 수 있는 방법을 제시 하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.847-849
• /
• 2009

Usually, after the decisions of the performance and range in the commercial vehicle, it is designed the ratings of the electric and mechanical elements for the vehicles. In this paper, the given performance and driving conditions, which are the maximum velocity, mileage, total weight of the normal gasoline scooter, battery type and size, and so on, are analysed for the design of the electric scooter. The maximum rotational speed and needed torque values of the electric motor which is substituted for the gasoline engine are calculated. These values can help to calculate the rating of the electric motor. In the calculation to obtain the torque and speed values, battery discharge and the running resistances are considered. We can decide the electric motor current value from the torque and speed values. The electric motor current values, which are significant parameter to decide the motor type and dimensions and characteristics of the electric motor, are decided by numerical simulation by the above conditions.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2002.06a
• /
• pp.57-61
• /
• 2002

Recently, mobility and accessibility occurs for the elder and the handicapped in the aging problem. In this paper, we analyze the dynamics of motor-scooter lifter, which helps to move the scooter in the automobile when we enjoy trip with the families including the elder and handicapped. We check the trajectories of lifter inside car to protect its corrosion and the stress at the joints of mechanical structure. Those can be helped to keep the safety and accuracy of the multiple dynamic systems for precision quality assurance in mass production.

• 재활복지
• /
• v.16 no.3
• /
• pp.421-437
• /
• 2012

The goal of this study is to provide the basic information for improvement of domestic standards on the powered scooter and the electric wheelchair considering using environments in the nation. The international standards and domestic standards have been analyzed and compared, in order to propose improved domestic standards. Based on the research, the items and standards for general and functional recommendations, electric features, and other suggestions have been reexamined so that the improvements on test item and standards have been identified, corrected, and summarized including max. speed, brake system, lights and so on. We have been preparing the reference data for the improvement of standards on the powered scooter and the electric wheelchair through the comparison & analysis on the international and domestic standards.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.19 no.5
• /
• pp.1-6
• /
• 2011

This paper proposes a new design method for electric scooter which can maximize the power efficiency at the given driving condition. The proposed method is designed with the electric and mechanical parameters and driving dynamics. These values are extracted from the dynamic and mathematical equations of the scooter. For validation, numerical simulation results are presented in this paper. As a result, the scooter achieved over 80% efficiency at 360 rpm at 1.42kw load. It is clear that the proposed method was verified through a 1.42kw numerical model.

• Journal of Energy Engineering
• /
• v.25 no.4
• /
• pp.30-36
• /
• 2016

The battery pack which is a main component of E-scooter needs the cooling system because it is the matter of battery safety in spite of the incresing of charge efficiency due to decress the internal resistence in the condition of high temperature. The purpose of this study is to analyse the effects of cooling methods which is the control of air's inlet and outlet operating timing. When each battery had large temperature deviation in the battery pack, the difference of battery's performance and efficiency were appeared. In this study, the cooling performance of battery pack has been improved by changing the operation timing of inlet and outlet fan, it improved the performance and efficiency of battery. The numerical analysis using a commercial code ANSYS CFX version 17.0 were used for the study.

• 재활복지
• /
• v.21 no.2
• /
• pp.191-216
• /
• 2017

Recently, according to demands for a mobility right of people with disabilities, the use of powered mobility device has been rapidly increased and recharging facilities have been set up in many places of country. But the standards for the installation and management of the facilities are not clear and many problems are brought up in operating the facilities. Therefore, regulations and realities of recharging facilities were investigated and the user survey was progressed. On the basis of the research results, a rational and efficient installation and management plan was drawn up. The plan suggests that the recharging facilities should be installed in a building managed by government and many kinds of public building like library, theater, sports facilities, department store, museum, etc. Further, the recharging facilities should secure independent place which have specified area for protecting of privacy and provide some amenities for people with disabilities to enhance the conveniences.

• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.411-412
• /
• 2016

최근 퍼스널 모빌리티에 대한 관심과 수요가 증대됨에 따라 전기에너지를 구동원으로 하는 소형 이동형 제품을 생활속에서 쉽게 접할 수 있게 되었다. 이러한 퍼스널 모빌리티 제품은 자이로센서 기술이 접복된 바퀴가 하나인 외발 전동휠과 세그웨이류의 제품, 전동퀵보드, 전동스쿠터 등 다양한 제품이 출시되고 있다. 또한 이들 제품의 구동전원은 대부분 리튬이차전지가 사용되고 있다. 본 논문에서는 충전과 방전을 반복하는 다셀이 직렬로 구성된 리튬 이차전지 배터리팩에서 발생되는 셀간 편차와 이로 인해 배터리팩의 전체적인 효율성이 저하되는 것을 방지하는 셀 밸런싱에 관한 기술로 과거 완속형의 표준충전에 적합한 1단 밸런싱의 문제점을 보완하기 위해 표준충전과 급속충전을 임의로 선택하여 사용하는 경우에도 정상적인 셀 밸런싱 수행은 물론 빠른 셀 밸런싱을 수행하기 위한 기법에 대해 살펴보았다.

• Proceedings of the KIPE Conference
• /
• 2016.11a
• /
• pp.93-94
• /
• 2016

친환경 이동수단 중 1인용 이동수단인 퍼스널 모빌리티에 대한 관심과 수요가 증대됨에 따라 과거 전기자전거에서 현재는 전동퀵보드, 전동스쿠터, 외발휠, 세그웨이류 등 그 종류와 외관적 형태는 매우 다양하다. 하지만 공통적인 부분은 전기에너지를 구동원으로 하고 있으며, 전기에너지를 저장하기 위한 수단으로 리튬이온 배터리가 사용된다는 것이다. 리튬이온배터리에서 배터리를 안전하고 효율적으로 사용하도록 제어하는 부분이 배터리관리시스템이며, 기능중에서 배터리 셀간을 정밀하게 균형을 잡아주며, 모든 셀이 완전 충전상태가 될 수 있도록 도와주는 셀 밸런싱 기능이 있다. 이러한 셀 밸런싱 기술은 주행거리 혹은 사용시간을 늘려주는 역할을 수행한다. 본 논문에서는 충전과 방전을 반복하는 다셀로 구성된 리튬이온배터리에서 셀 밸런싱이 수행되는 과정을 살펴보고 단일 밸런싱과 다중 밸런싱의 차이 및 장단점을 살펴보았다. 이를 통해 완속에서 급속충전으로의 변화, 빠른 셀 밸런싱 등의 필요성에 대해 실험을 통해 검증하였다.