• Korean Journal of Materials Research
• /
• v.31 no.5
• /
• pp.278-285
• /
• 2021

This study produces electroconductive polycaprolactone (PCL)-based film with different amounts of graphene (G) through electrospinning, and the characteristics of the produced G/PCL composites are investigated. The G/PCL results are analyzed by comparing them with those obtained using pure PCL electrospun film as a control. The morphology of electrospun material is analyzed through scanning electron microscopy and transmission electron microscopy. Mechanical and electrical properties are also evaluated. Composites containing 1 % graphene have the highest elongation rate, and 5 % samples have the highest strength and elasticity. Graphene contents > 25 % show electro-conductivity, which level improves with increase of graphene content. Biological characteristics of G/PCL composites are assessed through behavioral analysis of neural cell attachment and proliferation. Cell experiments reveal that compositions < 50 % show slightly reduced cell viability. Moreover, graphene combinations facilitated cell proliferation compared to pure PCL. These results confirm that a 25 % G/PCL composition is best for application to systems that introduce external stimuli such as electric fields and electrodes to lead to synergistic efficiency of tissue regeneration.

• Composites Research
• /
• v.31 no.3
• /
• pp.111-116
• /
• 2018

In this paper, magnetic FeCoNi particles have been grown through electroless plating on the surface of graphene, and then this hybrid material has been dispersed by various surfactants to prepare films. The pyridine surfactant shows the highest dispersability and low surface resistance value (351 Ohm/sq) and the electromagnetic shielding ability at the frequency of 10 GHz. Specially, the evaporation of the pyridine during the drying process could be able to form the internal conductive network and high dispersion of FeCoNi on the surface of graphene.

• Composites Research
• /
• v.37 no.5
• /
• pp.422-426
• /
• 2024

Due to the rapid miniaturization and increased power density of electronic devices, a significant amount of heat is generated during operation. This has led to a surge in demand for thermal management materials, such as thermal interface materials (TIMs) with high thermal conductivity. Among the various types, paste-type TIMs, mixtures of liquid silicone polymers and thermal fillers, can effectively fill the rough surfaces between heat sources and heat sinks, thereby ensuring efficient heat dissipation. However, thermal pastes generally exhibit poor long-term stability due to issues like filler/resin phase separation under extreme conditions of repeated heating, cooling, and prolonged compression. Consequently, research on high-performance thermal pastes with excellent long-term stability is actively underway. This paper aims to introduce various strategies for producing silicone oil based thermal pastes that achieve both high thermal conductivity and superior long-term stability.

• Composites Research
• /
• v.24 no.1
• /
• pp.45-50
• /
• 2011

Transparent and conductive carbon nanotube on polyethylene terephthalate (PET) were prepared by dip-coating method for self-sensing multi-functional nanocomposites. The changes in the electrical and optical properties of CNT coating mainly depended on the number of dip-coating, concentration of CNT solution. Consequently, the surface resistance and transmittance of CNT coating were sensitively controlled by the processing parameters. Surface resistance of CNT coating was measured using four-point method, and surface resistance of coated CNT could be better calculated by using the dual configuration method. Optical transmittance of PET film with CNT coating was evaluated using UV spectrum. Surface properties of coated CNT investigated by wettability test via static and dynamic contact angle measurement were consistent with each other. As dip-coating number increased, surface resistance of coated CNT decreased seriously, whereas the transmittance exhibited little lower due to the thicker CNT networks layer. Interfacial microfailure properties were investigated for CNT and indium tin oxide (ITO) coatings on PET substrates by electrical resistance measurement under cyclic loading fatigue test. CNT with high aspect ratio exhibited no change in surface resistance up to 2000 cyclic loading, whereas ITO with brittle nature showed a linear increase of surface resistance up to 1000 cyclic loading and then exhibited the level-off due to reduced electrical contact points based on occurrence of many micro-cracks.

• Journal of the Korean Electrochemical Society
• /
• v.25 no.4
• /
• pp.162-173
• /
• 2022

The development of new materials is an essential key for unraveling the environmental and energy problems all over the world. Among the various application materials in this area, crystalline and two-dimensional carbon materials have been studied from points of view such as electrical conductivity, chemical stability, and surface engineering due to the assembly of honeycomb and sp/sp² hybridization structure. Novel two-dimensional materials, including graphene and graphyne, have been continuously reported for several decades to develop in renewable energy fields. Also, various pristine/engineered two-dimensional carbon allotropes have been researched to combine metal nanoparticles in the form of a sphere, cubic, and so on. The renewable energy performance to apply for these materials is drastically increased. In this review, we introduce the research points of the 2D carbon allotrope materials, graphene and graphyne, and applications to improve the performance of renewable energy applications.

• Composites Research
• /
• v.31 no.6
• /
• pp.412-420
• /
• 2018

In this work, phenolic resins containing conductive carbon fillers, such as, petroleum coke, carbon black, and graphite, were used to improve the surface heating elements by impregnating a pitch-based carbon paper. The influence of conductive carbon fillers on physicochemical properties of the carbon paper was investigated through electrical resistance measurement and thermal analysis. As a result, the surface resistance and interfacial contact resistivity of the carbon paper were decreased linearly by impregnating the carbon fillers with phenol resins. The increase of carbon filler contents led to the improvement of electrical and thermal conductivity of the carbon paper. Also, the heating characteristics of the surface heating element were examined through the applied voltage of 1~5 V. With the applied voltage, it was confirmed that the surface heating element exhibited a maximum heating characteristic of about $125.01^{\circ}C$(5 V). These results were attributed to the formation of electrical networks by filled micropore between the carbon fibers, which led to the improvement of electrical and thermal properties of the carbon paper.

• Composites Research
• /
• v.37 no.5
• /
• pp.393-401
• /
• 2024

Epoxy is a thermosetting polymer with excellent properties such as heat and chemical resistance, making them essential in various industrial fields including electronics. The performance of epoxy is highly dependent on the type of curing agent used. Among them, sulfonium-based latent curing agents are notable for their fast curing speed, high curing hardness, and specificity to certain temperatures, making them attractive for manufacturing anisotropic conductive films in electronic materials where single-component epoxy is required. However, sulfonium-based latent curing agents face challenges in industrial application due to issues with low yield and purity. This study optimized the synthesis conditions for benzyl and naphthyl-type sulfonium curing agents (B-Sul⁺SbF6^-, N-Sul⁺NCyF^-, N-Sul⁺NFSI^-). By adjusting reaction time, reaction temperature, and reactant ratios, yield was maximized, significantly reducing both reaction time and temperature. The three optimized curing agents were evaluated for their thermal and mechanical properties to assess curing behavior and storage stability. The results confirmed that stable curing performance was maintained even after mixing. This study aims to expand the industrial applicability of sulfonium curing agents.

• Polymer(Korea)
• /
• v.31 no.4
• /
• pp.297-301
• /
• 2007

In this work, polymer/(layered silicate) nanocomposites (PLSN) based on poly (ethylene oxide) (PEO), ethylene carbonate (EC) as a plasticizer, lithium salt ($LiClO_4$), and sodium montmorillonite ($Na^+-MMT$) or organic montmorillonite (organic MMT) clay were fabricated. And the effects of organic MMT on the polymer matrix were investigated as a function of ionic conductivity. For the application to electrolytes an Li batteries, polymer electrolytes containing the organic nanoclays were used in this work. As a result, the spacing between layers and hydrophobicity of the organic nanoclays were increased, affecting on the exfoliation behaviors of the MMT layers in clay/PEO nanocomposites. From ion-conductivity results, the organic-MMT showed higher values than those of $Na^+-MMT$, and the MMT-20A sample that was treated by methyl dihydrogenated tallow ammonium, showed the highest conductivity in this system.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.235-235
• /
• 2003

The development of a buffer layer is an important issue for the second -generation wire, YBCO coated metal wire. The buffer layer demands not only on the prohibition of the reaction between YBCO and metal substrate, but also the proper lattice match and conductivity for high critical current density (Jc) of YBCO superconductor, In order to satisfy these demands, we suggested CaRuO3 as a useful candidate having that the lattice mismatches with Ni (200) and with YBCO are 8.2% and 8.0%, respectively. The CaRuO3 thin films were deposited on Ni substrates using various methods, such as e-beam evaporation and DC and RF magnetron sputtering. These films were investigated using SEM, XRD, pole-figure and AES. In e-beam evaporation, the deposition temperature of CaRuO3 was the most important since both hi-axial texturing and NiO formation between Ni and CaRuO3 depended on it. Also, the oxygen flow rate had i[n effect on the growth of CaRuO3 on Ni substrates. The optimal conditions of crystal growth and film uniformity were 400$^{\circ}C$, 50 ㎃ and 7 ㎸ when oxygen flow rate was 70∼100sccm In RF magnetron sputtering, CaRuO3 was deposited on Ni substrates with various conditions and annealing temperatures. As a result, the conductivity of CaRuO3 thin films was dependent on CaRuO3 layer thickness and fabrication temperature. We suggested the multi-step deposition, such as two-step deposition with different temperature, to prohibit the NiO formation and to control the hi-axial texture.

• Composites Research
• /
• v.22 no.6
• /
• pp.1-6
• /
• 2009

This paper presents an experimental study on the piezoresistive behavior of nanocomposite strain sensors subjected to various loading modes and their capability to detect structural deformations and damages. The electrically conductive nanocomposites were fabricated in the form of a film using various types of thermoplastic polymers and multi-walled carbon nanotubes (MWNTs) at various loadings. In this study, the nanocomposite strain sensors were bonded to a substrate and subjected to tension, flexure, or compression. In tension and flexure, the resistivity change showed dependence on measurement direction, indicating that the sensors can be used for multi-directional strain sensing. In addition, the sensors exhibited a decreasing behavior in resistivity as the compressive load was applied, suggesting that they can be used for pressure sensing. This study demonstrates that the nanocomposite strain sensors can provide a pathway to affordable, effective, and versatile structural health monitoring.