• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.10
• /
• pp.75-80
• /
• 2009

In order to prevent loss of communication packets and drop of transmission speed owing to the network fault occurrence, it should be considered network redundancy. That is why a messages of IED GOOSE is the critical signal in charge of protection and control of the substation. So most of users implement the substation automation system with Hybrid network topology ant IED supporting double ethernet ports. Because IEC 61850 GOOSE conformance test is limited in the functional test, this paper suggests how to test the performance of IED GOOSE transmission considering Network redundancy, and describes the analysis of an example test on real IEDs and how to impact the IED GOOSE performance to the substation automation system.

• Proceedings of the KIEE Conference
• /
• 2004.04a
• /
• pp.49-51
• /
• 2004

고전압 기기의 절연물 내부에서 부분방전 현상이 발생되면 절연파괴로 진전된다. 회전기기가 운전중인 상태에서 on-line 부분방전시험은 고정자 권선의 절연상태를 검사, 평가 할 수 있는 중요한 수단으로서 이러한 부분방전시험을 통하여 회전기기 시스템의 사고예방을 위한 진단을 할 수 있다. 부분방전 펄스는 10MHz $\sim$ 1GHz의 대역폭을 갖는 것으로 알려져 있으며, 이러한 고주파 대역의 전자파 에너지의 효과적인 검출을 위한 센서 중 하나로 웨이브가이드 구조의 고주파 검출센서가 존재한다. 기존의 전자기적 에너지를 검출하는 SSC (Stator Slot Coupler)센서를 한쪽 포트를 가지는 마이크로스트립센서 형태로 사용할 경우 접지면이 도체전체로 씌워져 있고 임피던스 정합을 위한 50옴의 칩저항이 신호라인과 접지사이 루프를 형성하여 기기 운전시 기기의 성능에 영향을 미칠 수 있는 단점을 가지고 있다. 이 단점을 보완하기 위해서 본 논문에서는 회전기내 부분방전 펄스의 전자기적 에너지를 검출할 수 있는 2선 평행 전송선로 라인을 응용한 부분방전 검출 센서를 제안하였고 시뮬레이션을 통해 성능을 입증하였다. 제안된 센서의 성능을 입증하기 위하여 2선 평행 전송선로 타입의 센서와 기존의 SSC (Stator Slot Coupler) 센서를 약간 변형시킨 마이크로 스트립 센서를 고정자 슬롯의 Wedge 부착한 후 두 센서 비교 분석하였다. 결과적으로 제안된 센서는 기존 SSC 타입의 마이크로스트립 센서에 비하여 더 간단한 형상을 가지며 운전 중 기기의 성능에 영향을 덜 미치는 효과를 얻을 수 있었다.

• Journal of IKEEE
• /
• v.7 no.2 s.13
• /
• pp.188-196
• /
• 2003

In this paper, a demultiplexer for MPEG-2 Transport Stream which can be applied to terrestrial digital broadcast is developed. The demultiplexer separates video, audio, and data from MPEG-2 multimedia stream and transports them to each decoders respectively. While most existing demultiplexers of MPEG-2 transport stream have been developed as hardware systems, but the fast increment of computer's performance enables a software demultiplexer to be worked in realtime. The developed demultiplexer is implemented as a software module called a filter using DirectShow of Microsoft which is based on COM(Component Object Model)and works on the Windows system. The operation of the demultiplexer is verified by using the GraphEdit tool and rendering a test file formatted as MPEG-2 transport stream.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2005.11a
• /
• pp.29-32
• /
• 2005

In this paper, we present the 8 port in-phase power divider using right/left-handed transmission line. The proposed power divider splits the input power into 8 port regardless of the electrical length of transmission lines. Its size is much smaller than the conventional one. As the length of the transmission line in the power divider decreases, its bandwidth becomes wider.

• Proceedings of the KIPE Conference
• /
• 2017.11a
• /
• pp.111-112
• /
• 2017

This paper presents a novel three-port converter for the OnBoard Charger of Electric Vehicles by using an impedance control network. The proposed concept is suitable for charging a main battery and an auxiliary battery of an electric vehicle at the same time due to its power handling capability of the converter without additional switches. The power flow is managed by the phase angle (${\Theta}$) between the ports whereas voltage at each port is controlled by the asymmetric duty cycle and the phase shift (${\Phi}$) between the inverter lags controlled by the impedance control network. The proposed system has a capability of achieving zero voltage switching (ZVS) and zero current switching (ZCS) at all the switches over the wide range of input voltage, output voltage and output power. The feasibility of the proposed system is verified by the PSIM simulation.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.2
• /
• pp.331-336
• /
• 2013

The purpose of this study is to visualize the characteristics of ER fluids as preceding step of developing 3 port ER valves. As the strength of the electric field increases, more clusters in flow are made and these clusters are thought to be the reasons of the load flow rate being increased and the outlet flow rate being decreased. The ER Valves and load and outlet flow rate check method are considered to be applied to the fluid power control system. Using the manufactured pressure control valve, a one-link manipulator with FHA in robot system is driven. As a result, it is experimentally confirmed that the pressure control valve using ER fluids is applicable to use in driving actuator. If it applies characteristics of the ER fluids, it will be able to apply in the control system for the ER Valve which occurs from industrial controller(PLC).

• Resources Recycling
• /
• v.25 no.4
• /
• pp.54-59
• /
• 2016

EAF processed slag which contains about 20 ~ 35 weight percent FetO is poured to slag pot and cooled. If we recover Fe from molten slag by the reduction, we will improve steel yield rate and reduce slag quantity poured from the furnace. Usually, carbon is used as a reductant and slag foaming agent in the EAF process. In this experiment, after melt the metal in induction furnace and then add slag with carbon and Al dross powder as a reductant, we investigated the reduction of FetO from slag and change of Phophorus content. As the result, when we use Al dross as a reductant, recovery rate is two times more than carbon. Phosphorus pick up is less than 50ppm with reduction of EAF slag.

• Resources Recycling
• /
• v.33 no.2
• /
• pp.46-53
• /
• 2024

The residual heat and high CaO content present in the slag remaining in the ladle after the completion of continuous casting in the electric arc furnace (EAF) steelmaking process have been utilized to reduce power consumption and lime usage in the ladle furnace (LF) process. However, if the timing of such processes does not align with the LF and continuous casting operations, the recycling rate will decrease. To increase the slag recycling rate, the effect of ladle slag recycling methods, specifically pouring ladle slag into the slag pot in advance for subsequent recycling, on LF operations was analyzed. The slag liquefaction rate was calculated using the thermodynamic program Factsage 8.3 for ladle molten slag recycling methods. By applying each of the 10 heats operations for the ladle slag recycling methods, the desulfurization ability and LF operation performance were compared. It was found that when slag was immediately recycled into the ladle after continuous casting was completed, power consumption decreased by 0.3 MWh, LF operation time was shortened by 1.2 minutes, and the desulfurization rate increased by 5.8%.

• The Korean Journal of Financial Management
• /
• v.24 no.4
• /
• pp.75-106
• /
• 2007

In this study, it is analyzed whether oil price plays a major role in the pricing return on Koran stock market and examined why the covariance risk between oil and return on stock is different in each industry. Firstly, this study explores whether the expected rate of return on stock is pricing due to global oil price factors as a function of risk premium by using a two-factor APT. Also, it is examined whether spill-over effects of oil price volatility affect the beta risk to oil price. Considering the asymmetry of oil price volatility, we use the GJR model. As a result, it shows that oil price is an independent pricing factor and oil price volatility transmits to stock return in only electricity and electrical equipment. Secondly, the two step-analyzing process is introduced to find why the covariance between oil price factor and stock return is different in each industry. The first step is to study whether beta risk exists in each industry by using two proxy variables like size and liquidity as control variables. The second step is to grasp the systematic relationship between the difference of liquidity and size and beta to oil price factor by using the panel-data model which can be analyzed efficiently using the cross-sectional data formed with time series. Through the analysis, we can argue that oil price factor is an independent pricing factor in only electricity and electrical equipment having the greatest market capitalization, and know that beta risk to oil price factor is a proxy of size in the other industries. According to the result of panel-data model, it is argued that the beta to oil price factor augments when market capitalization increases and this fact supports the first assertion. In conclusion, the expected rate of return of electricity and electrical equipment works as a function of risk premium to market portfolio and oil price, and the reason to make beta risk power differentiated in each industry attributes to the size.

• Journal of IKEEE
• /
• v.9 no.1 s.16
• /
• pp.19-30
• /
• 2005

Packet classification is defined as the action to match the packet with a set of predefined rules. One of classification is to use Ternary Content Addressable Memory hardware search engine that has faster than other algorithmic methods. However, TCAM has some limitations. One of them is that TCAM can not perform range matching efficiently. A range has to be expanded into prefixes to fit the boundary. In general, the number of expansion could be up to 2w-2, where w is the width of the field. For example, if two range fields with 16 bits are used, there could be up to $30\;{\times}\;30\;=\;900$ expansions for a single rule. In this paper, we describe the novel algorithm for converting range matching rules into TCAM entry efficiently. The number of maximum entry is 2w-4 when using the algorithm. Furthermore, it has also benefit about the negation range. In the result of experimentation, the new scheme practically reduces 14 percent in case that searched fields are source port and destination port number.