• Journal of Advanced Navigation Technology
• /
• v.22 no.5
• /
• pp.351-358
• /
• 2018

In this study, we propose a method of suppressing the leakage noise signal of motor assembly through the test. The motor assembly is mounted on outside of the aircraft to rotate an antenna and must satisfy RE102 requirement on MIL-STD-461F in terms of electromagnetic interference. It is confirmed by RE102 test result hat the leakage noise signal of the equipment occurs due to external influx through the power and control cable and rotation of the motor. And it is ascertained that the part where internal/external physical shielding is difficult to rotate is the leakage path. To reduce the leakage noise signal, the electrical ground reinforcement and the electric shielding structure considering the operation of the equipment is applied and it is verified that the requirement is satisfied. Finally, we verified that required specification are met by applying circular corrugated choke with interlocking shapes and conductive grease to the noise leakage path.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.7
• /
• pp.1373-1379
• /
• 2007

A modified adaptive switching median filter for impulse noise removal, which has the noise detection step and the noise filtering step, is proposed in this paper. In the noise detection step, we use the detection threshold which is earned by calculating the intensity differences between pixels nearby with each other in localized window, to determine whether the pixels in the image are noise or not. Then in the noise filtering step, we will only remove the corrupted pixels and remain the good pixels. By the noise detection result, we can easily get the local noise density of the image, and use it to consider the filtering mask size and the times of filtering iteration according to different localized noise corruptions. For Setting the simulation result, we compared the proposed method to conventional median filters with several test images corrupted by various impulse noise densities. We also use the peak signal-to-noise ratio (PSNR) to evaluate restoration performance, the simulation results demonstrate that the proposed method shows better results than other median-based type filters.

• Journal of IKEEE
• /
• v.28 no.1
• /
• pp.33-37
• /
• 2024

In this paper, we report the design and the measurement of a X-band low noise amplifier (LNA) monolithic microwave integrated circuit (MMIC) using a 0.25 ㎛ gate length microstrip GaN-on-SiC high electron mobility transistor (HEMT) technology. The developed X-band GaN-based LNA MMIC achieves small signal gain of 22.75 dB ~ 25.14 dB and noise figure of 1.84 dB ~ 1.94 dB in the desired band of 9 GHz to 10 GHz. Input and output return loss values are -11.36 dB ~ -24.49 dB and -11.11 dB ~ -17.68 dB, respectively. The LNA MMIC can withstand 40 dBm (10 W) input power without performance degradation. The chip dimensions are 3.67 mm × 1.15 mm. The developed GaN-based LNA MMIC is applicable to various X-band applications.

• 전기의세계
• /
• v.38 no.9
• /
• pp.35-45
• /
• 1989

최근 정보 및 산업사회의 발달에 따라 전기에너지의 이용이 양적, 수적으로 증가되고 있는 가운데 모든 전기.전자기기 및 전력설비에 전기에너지를 전달하는 전력선로상에서 불요전기신호에 의한 전원방해현상이 발생되는 경우가 빈번해 지고 있다. 따라서 기기의 정상적인 동작에 장애를 주는 증 PLD현상이 심각해지고 있는 실정이다. 그러므로 PLD현상파악 및 이에 대한 방지대책의 수립은 EMI/EMC문제의 가장 기본적이라고 할 수 있다. 먼저 PLD에 대한 실태조사가 뒤따라야 할 것이다. 또는 국내 여러지역을 전력수요가별로 구분하여 PLD현상을 측정할 필요가 있다. 그리고 측정된 데이터의 분석에 의해 각종 전기.전자기기 등의 효율적 운용을 보장하기 위해서는 PLD현상에 대한 대책을 법적규제의 측면과 잡음대책방안의 측면에서 제시해야 할 것이다.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2004.06a
• /
• pp.272-277
• /
• 2004

• Journal of the Institute of Convergence Signal Processing
• /
• v.13 no.4
• /
• pp.201-206
• /
• 2012

The indirect-contact ECG measurement is a newly developed method for unconstrained and nonconscious measurement in daily life. This study introduced a new method of electrode circuit design developed for reducing the 60Hz power line noise observed at the indirect-contact ECG measurement. By the introduced common-mode-driven shielding, the voltage of the electrical shield surrounding the capacitive coupling electrode is maintained at the same as the common mode voltage. Though the method cannot reduce the level of common mode voltage itself, that reduces effectively the differential mode noise converted from the common mode voltage by the difference of cloth impedance between the two capacitive coupling electrode. The experiment results using the actual indirect-contact ECG showed that the 60Hz power line noise was reduced remarkably though the reduction ratio was smaller than the expected by the theory. Especially, the reduction ratio became large for the large difference of cloth. It is expected that the introduced method is useful for reducing the power line noise under condition of poor electrical grounding.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.10
• /
• pp.2205-2210
• /
• 2009

In this paper, the proposed method is a denoising technology by tangent curve interpolation of zero points. The problem of the hard threshold method is improved by the proposed method. The quantity of time fluctuation of the electromagnetic signal as the quantity of electric fluctuation of the natural world or the curve of motion waveform of the fast movement of human extracted using virtual reality is, in fact, complex. Therefore it is important to decide exactly the signal properties as the inflection point for observation signal. In particular, it is necessary to extract the properties after denoising, since the measurement signal of the natural world include some noises. It shows that the noise of the inflection point signal with noise II, noise factor 5, is eliminated by the proposed method, and the result of SNR for the signal is improved 3.4dB than that by the conventional hard threshold.

• The Journal of the Acoustical Society of Korea
• /
• v.25 no.8
• /
• pp.383-388
• /
• 2006

This Paper presents a novel approach to single channel microphone speech enhancement in noisy environments. Widely used noise reduction techniques based on the spectral subtraction are generally expressed as a spectral gam depending on the signal-to-noise ratio (SNR). The well-known decision-directed(DD) estimator of Ephraim and Malah efficiently reduces musical noise under the background noise conditions, but generates the delay of the a prioiri SNR because the DD weights the speech spectrum component of the Previous frame in the speech signal. Therefore, the noise suppression gain which is affected by the delay of the a priori SNR, which is estimated by the DD matches the previous frame rather than the current one, so after noise suppression. this degrades the noise reduction performance during speech transient periods. We propose a computationally simple but effective speech enhancement technique based on the sigmoid type function for the weight Parameter of the DD. The proposed approach solves the delay problem about the main parameter, the a priori SNR of the DD while maintaining the benefits of the DD. Performances of the proposed enhancement algorithm are evaluated by ITU-T p.862 Perceptual Evaluation of Speech duality (PESQ). the Mean Opinion Score (MOS) and the speech spectrogram under various noise environments and yields better results compared with the fixed weight parameter of the DD.

• Proceedings of the KIEE Conference
• /
• 1999.11c
• /
• pp.807-811
• /
• 1999

자동 지문 인식을 위한 특징점 추출 과정에서 얻은 특징점에는 지문 획득시 발생하는 잡음과 전처리 과정으로 인한 정보의 손실에 의해 상당량의 의사 특징점이 포함되어 있다. 본 논문에서는 특징점들로 구성된 지문의 특징량에서 잡음이라고 할 수 있는 의사 특징점을 제거하는 알고리즘을 제안한다. 제안하는 알고리즘은 후보 특징점 목록에서 세선화된 지문 화상의 구조적 특성을 고려하여 복원 가능 영역에 속하고 의사 특징점이라고 간주되는 특징점을 선택한다. 이와 같이 선택된 특징점이 세선화 화상에 위치하는 영역은 잡음에 의해 잘못 세선화된 부분이기 때문에 해당 영역을 올바르게 재구성하고 후보 특징점 목록에서 선택한 특징점을 삭제한다. 재구성된 세선화 화상에서 지문 원화상의 부영역별 방향과 지문의 구조적 특성을 근거로 후보 특징점이 위치한 영역의 패턴을 검사하여 진짜 특징점만을 선택함으로써 의사 특징점을 제거하게 된다. NIST sdb 14의 지문 화상을 알고리즘에 적용한 결과는 정추출율 손실 대비 높은 오추출율 개선을 얻었음을 보여주고 있다.

• Journal of IKEEE
• /
• v.22 no.2
• /
• pp.510-513
• /
• 2018

Recently, EMC (electromagnetic compatibility) becomes very important, which demands the measurement of EMI (electromagnetic interference) in the chip level. NFS (near-field scanning) systems defined in IEC 61967 and IEC 62508 are typical methods to analyze EMI in the chip level. As chips becomes faster, frequency measurement of NFS system should become wideband, but it degrades SNR (singal-to-noise ratio) of the NFP (near-field probe). This paper surveys SNR enhancement technologies of the NFS while maintaining wideband characteristics.