• Food Science and Preservation
• /
• v.14 no.3
• /
• pp.301-307
• /
• 2007

To efficiently use Korean mung beans, the functional characteristics of mung bean powder(A), unhydrolyzed mung bean flour(B), and mung bean flour hydrolyzed under optimum conditions(C), were compared. The contents of protein, fat, carbohydrate, ash, and water, did not vary greatly with different treatment methods. The color values of (B) and (C) were similar, while the L value of (A) was higher than those of the other samples. Thereducing sugar content of (C) was highest at 292.63 mg%, while the total phenol contents of (A) and (C) were similar at 38.63 mg% and 38.38 mg%, respectively. The molecular weight of (A) was under 17 kDa by SDS-PAGE, and was lower than the molecular weights of the other samples (B, C), which generally ranged from 17 kDa to 72 kDa. The free sugar content of (C) was highest at 1,125.16 mg%, while (A) and (B) yielded values of 86.36 mg% and 54.20 mg%, respectively. Total free amino acid contents were in the order(C)(B)(A), and were 22,116.35 mg%, 2,731.29 mg%, and 578.54 mg%, respectively. The amino acid content of (C) was 8,231.42 mg% and was higher than those of (A) or(B). The DPPH free radical scavenging abilities of (A) and (C) were high, at 62.1% and 57.63%, respectively, while (B) showed a lower value at 19.26%. Fibrinolytic activity was highest(24.01%) in (C), and was 20.69% in (A) and 18.06% in (B). The above results indicate that mung bean flour hydrolyzed under optimal conditions (C) had the highest functional and quality characteristics, in comparisonh with unhydrolyzed flour (B) and mung bean powder (A). Diverse applications of hydrolyzed mung bean flour are anticipated.

• Journal of radiological science and technology
• /
• v.39 no.1
• /
• pp.99-105
• /
• 2016

The noise power spectrum (NPS) is one of the most general methods for measuring the noise amplitude and the quality of an image acquired from a uniform radiation field. The purpose of this study was to compare different NPS methodologies by using megavoltage X-ray energies. The NPS evaluation methods in diagnostic radiation were applied to therapy using the International Electro-technical Commission standard (IEC 62220-1). Various radiation therapy (RT) devices such as TrueBeam$^{TM}$(Varian), BEAMVIEW$^{PLUS}$(Siemens), iViewGT(Elekta) and Clinac$^R$ iX (Varian) were used. In order to measure the region of interest (ROI) of the NPS, we used the following four factors: the overlapping impact, the non-overlapping impact, the flatness and penumbra. As for NPS results, iViewGT(Elekta) had the higher amplitude of noise, compared to BEAMVIEW$^{PLUS}$ (Siemens), TrueBeam$^{TM}$(Varian) flattening filter, Clinac$^{R}$iXaS1000(Varian) and TrueBeam$^{TM}$(Varian) flattening filter free. The present study revealed that various factors could be employed to produce megavoltage imaging (MVI) of the NPS and as a baseline standard for NPS methodologies control in MVI.

• Food Science of Animal Resources
• /
• v.30 no.3
• /
• pp.419-426
• /
• 2010

This study was conducted to investigate the effect of different castration ages on meat quality and sensory properties of Korean native black goats over 410 days. For the experiment, 32 heads of goat (eight heads/4 treatment) were subjected to either a control (5 month non-castration), T1 (7 month castration), T2 (5 month castration) or T3 (3 month castration). The total weight gain for Korean native black goats was highest in the T2 group after feeding for 410 days and the weight gain/day tended to be similar to the total weight gain. The total feeding amounts were lowest (410.82 kg) in T3; however, the feed intake ratio was 16.39 in T2, indicating that it had the best feed efficiency among groups. The cooking loss and drip loss of the Korean native black goats was highest in the control, being 35.53% and 2.08%, respectively (p<0.05), while the total cholesterol of the treatments was higher than that of the control (p<0.05). Moreover, the overall sensory evaluation of the treatment groups was low, indicating that there was more meat flavor when compared to the controls in terms of juiciness, tenderness, flavor, texture, black goat off-flavor and overall evaluation (p<0.05). T2 was found to have the best meat flavor upon sensory evaluation. Additionally, the meat color of the control showed the highest $L^*$ value and Hue value, while T3 showed the highest $a^*$ value (3.61) and T2 showed the highest $b^*$ value and Chroma. The composition of fatty acids was 53.76% oleic acid in T2, while the amounts of Mono-unsaturated fatty acid (MUFA) were highest in T1 and T2 (p<0.05). As a result, the MUFA/SFA ratios of T1 and T2 were higher than those of the control (p<0.05). In conclusion, it is most advantageous to castrate Korean native black goats at the age of 5 months for the best performance and meat quality.

• Korean Chemical Engineering Research
• /
• v.60 no.2
• /
• pp.249-254
• /
• 2022

With the rapid advance of the semiconductor and Information and communication technologies, remote environment monitoring technology, which can detect and analyze surrounding environmental conditions with various types of sensors and wireless communication technologies, is also drawing attention. However, since the conventional remote environmental monitoring systems require external power supplies, it causes time and space limitations on comfortable usage. In this study, we proposed the concept of the self-powered remote environmental monitoring system by supplying the power with the levitation-electromagnetic generator (L-EMG), which is rationally designed to effectively harvest biomechanical energy in consideration of the mechanical characteristics of biomechanical energy. In this regard, the proposed L-EMG is designed to effectively respond to the external vibration with the movable center magnet considering the mechanical characteristics of the biomechanical energy, such as relatively low-frequency and high amplitude of vibration. Hence the L-EMG based on the fragile force equilibrium can generate high-quality electrical energy to supply power. Additionally, the environmental detective sensor and wireless transmission module are composed of the micro control unit (MCU) to minimize the required power for electronic device operation by applying the sleep mode, resulting in the extension of operation time. Finally, in order to maximize user convenience, a mobile phone application was built to enable easy monitoring of the surrounding environment. Thus, the proposed concept not only verifies the possibility of establishing the self-powered remote environmental monitoring system using biomechanical energy but further suggests a design guideline.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.33 no.2
• /
• pp.83-90
• /
• 2023

The β-Ga₂O₃ has the most thermodynamically stable phase, a wide band gap of 4.8~4.9 eV and a high dielectric breakdown voltage of 8MV/cm. Due to such excellent electrical characteristics, this material as a power device material has been attracted much attention. Furthermore, the β-Ga₂O₃ has easy liquid phase growth method unlike materials such as SiC and GaN. However, since the grown pure β-Ga₂O₃ single crystal requires the intentionally controlled doping due to a low conductivity to be applied to a power device, the research on doping in β-Ga₂O₃ single crystal is definitely important. In this study, various source powders of un-doped, Sn 0.05 mol%, Sn 0.1 mol%, Sn 1.5 mol%, Sn 2 mol%, Sn 3 mol%-doped Ga₂O₃ were prepared by adding different mole ratios of SnO₂ powder to Ga₂O₃ powder, and β-Ga₂O₃ single crystals were grown by using an edge-defined Film-fed Growth (EFG) method. The crystal direction, crystal quality, optical, and electrical properties of the grown β-Ga₂O₃ single crystal were analyzed according to the Sn dopant content, and the property variation of β-Ga₂O₃ single crystal according to the Sn doping were extensively investigated.

• Journal of Korean Society of Forest Science
• /
• v.30 no.1
• /
• pp.19-29
• /
• 1976

The fiberboard and paper mills in this country are much affected by the price hikes and shortage of phenolic resins, since phenolic acid as a raw material depends on imported good. It is prerequisite to fiberboard industry to help replace with other sized and stabilize the prices and supply of them, improving the quality of boards. Thus, the present study was carried out to examine the effect of strength increasing sized such as urea formaldehyde resin (anion and cation type) and urea melamine copolymer resin, on the quality of the wet forming hardboard, and comparing them with two types of proprietary modified melamine resins, and ordinary size, phenol resin. The Asplund pulp was prepared from wood wastes mixed with 20 percent of lauan and 80 percent of pines as a fibrous material. After sizing agents were added at a pH of 4.5 for 10 minutes with alum in the beater, the stock was made in the form of wet sheet, prepared, and then performed by hot pressing cycle: $180^{\circ}C$, $50-6-5kg/cm^2$, 1-2-7 minutes. The properties of hardboard were examined after air conditioning. The results obtained are summarized as follows: 1. There is a significant difference in specific gravity among hardboards that were treated with strength increasing resins, but no difference is effected by the increase in the resin content. In the case of modified melamine resin, its specific gravity is highest. The middle group comprises cation type of urea resin, anion type of urea resin, and acid colloid of urea-melamine copolymer resin. The lowest is phenolic resin. 2. The difference of the moisture content of hardboard both by the resins and by the amount of each resin applied is significant. The moisture content of hardboard becomes lower along with the increase of each resin content, but there is no difference between 2 and 3 percent. 3. For water absorption, there is a significant difference both in the adhesives used and in the amount of paraffin wax emulsion. The water resistance becomes higher inn proportion to the content of the paraffin wax emulsion. To satisfy KS F standards of the water resistance, a proprietary modified melamine resin (p-6100) and modified cation type of urea resin (p-1500) do not require any paraffin wax emulsion, but in the case of anion type of urea resin, cation type of urea resin, and urea-melamine copolymer resin, 1 percent of paraffin wax emulsion is needed, and 2 percent of paraffin wax emulsion in the case of phenolic resin. 4. The difference of flexural strength of hardboard both by the resins and by the amount of each resin is significant. Modified melamine resin shows the highest degree of flexural strength. Among the middle group are urea-melamine copolymer resin, p-1500, anion type of urea resin, and cation type of urea resin. Phenolic resin is the lowest. The cause may be attributable to factors combined with the pressing temperature, sizing effect, and thermal efficiency of press platens heated electrically. 5. Considering the economic advantages and properties of hardboard, it is proposed that urea-melamine copolymer resin and cation type of urea resin be used for the development of the fiberboard industry. It is desirable to further develop the modified urea-melamine copolymer resin and cation type of urea resin through continuous study.