• Journal of IKEEE
• /
• v.23 no.2
• /
• pp.743-746
• /
• 2019

In this paper we proposed a new ocean radiation automatic monitoring system. The proposed system has the following characteristics: First, using NaI + PVT mixed detectors, the response speed is fast and precision analysis is possible. Second, the application of temperature compensation algorithm to scintillator-type sensors does not require additional cooling devices and enables stable operation in the changing ocean environment. Third, since cooling system is not needed, electricity consumption is low, and electricity can be supplied reliably by utilizing solar energy, which can be installed at the observation deck of ocean environment. Fourth, using GPS and wireless communications, accurate location information and real-time data transmission function for measurement areas enables immediate warning response in the event of nuclear accidents such as those involving neighboring countries. The results tested by the authorized testing agency to assess the performance of the proposed system were measured in the range of $5{\mu}Sv/h$ to 15mSv/h, which is the highest level in the world, and the accuracy was determined to be ${\pm}8.1%$, making normal operation below the international standard ${\pm}15%$. The internal environmental grade (waterproof) was achieved, and the rate of variation was measured within 5% at operating temperature of $-20^{\circ}C$ to $50^{\circ}C$ and stability was verified. Since the measured value change rate was measured within 10% after the vibration test, it was confirmed that there will be no change in the measured value due to vibration in the ocean environment caused by waves.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.30 no.3
• /
• pp.202-208
• /
• 2019

In this study, an active element pattern (AEP) of a printed dipole was analyzed in 1D and 2D arrays. First, an AEP of the printed dipole was obtained using the simulation in the 2D infinite array. The scan blindness in the 2D array occurred in the E-plane direction at around ${\pm}36^{\circ}$; however, it was barely observed in the 1D array. To analyze the cause of the scan blindness in the 2D array, the dispersion properties of a unit cell was obtained and compared with the scan blindness by frequency change. The difference between the scan blindness of the 1D and 2D arrays was clarified using the comparison of the Q value in the unit cell in the 1D and 2D arrays. Then, the coupling of the electric field in the E-plane direction was observed when nine elements were separated between the two ports in a linearly arranged dipole structure. Finally, the printed dipole array was fabricated, and an AEP was measured for the $11{\times}1$ and $11{\times}3$ sub arrays. The proposed theory was verified using these observations and by comparison with the simulation results.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.10
• /
• pp.221-230
• /
• 2020

Elevators, an important vertical means of transportation used daily, have enriched the city into a state-of-the-art giant skyscraper forest. The purpose of this study is to analyze problems about elevator safety and present engineering and legal improvement measures. The research method adopted the important engineering elements that make up elevator safety and the elevator safety law and the method of analyzing the papers already studied. Based on his experience as a policy advisor to the Korea Elevator Safety Authority, he analyzed the problems of the related statutes, focusing on the construction, electrical, electronic, information and communication, and the elevator safety law, which comprise the elevator safety system. As a result of the research, it was suggested that the so-called legal engineering system should be established through the convergence of laws and disciplines related to elevator safety. This study is expected to be an alternative to establishing an engineering and legal convergence system for elevator safety in the future.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.11
• /
• pp.139-147
• /
• 2016

This study described the design scheme for each step of the production test for the Fire Control System(FCS) of the K-55A1 PIP business of Hanwha Thales since 2011. From the time of receipt of the product It is necessary to improve the FCS's reliability by using the Unit Test, burn-In test, System Test. FCS of K-55A1 acts as a 'head' that control the self-propelled howitzer, and connected with the electrical and physical connection of self-propelled howitzer's multiple unit (Inertial navigation systems(IN), Muzzle Velocity Radar (MVR)) for the normal operation without an inch of error in operating. We designed the production testing equipment automatically as much as possible and designed with the environment similar to the self-propelled howitzer. by using this production testing equipment, It should help for the strengthen national defense of the Republic of Korea.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.211.2-211.2
• /
• 2012

천리안위성은 통신, 해양, 기상 임무를 띤 우리나라 최초의 정지궤도복합위성으로 지난 2010년 6월 27일 성공적으로 발사된 후 동경 128.2도, 적도 상공 약 35,800 km 고도의 정지궤도에 안착되었다. 이 후 약 6개월 여의 궤도상시험 기간과 2개월의 안정화 기간을 거쳐 2011년 4월 1일, 기상청은 위성자료 서비스를 위한 정규운영을 시작하였다. 천리안위성의 기상탑재체인 기상영상기는 다중채널 복사계로 한반도 주변뿐만 아니라 전 지구적 기후 변화 및 대기 운동 그리고 급변하는 기상상황을 감시하기 위해 실시간 관측과 전송 시스템을 갖추고 있다. 이 기상영상기를 운용하는 기상청 국가기상위성센터 지상국에서는 자료수신 및 영상전처리시스템을 갖추고 수신된 위성신호로부터 영상 분리 후 복사보정 및 기하보정을 수행하며, 위성자료배포시스템을 통해 일정 시간 간격 내에 사용자들에게 처리 자료를 배포하고 있다. 영상 복사보정은 기상영상기 내의 각 채널별 디텍터가 감지한 지구복사휘도의 전기적 신호를 지상에서 복사휘도와 휘도온도 값으로 변환하는 작업이다. 절대검정체로서 흑체와 우주보기 값을 이용하는 적외채널과 달리, 가시채널 디텍터는 절대검정체가 탑재되어있지 않기 때문에 우주보기 값 외에 대리검정 방법을 이용한다. 이러한 가시채널 노화도 분석에 달 관측을 통한 비교 분석이 한 방법으로 제시되고 있다. 천리안위성 기상영상기의 정규운영 1년간의 가시채널 디텍터의 노화도는 6 % 이내로 측정되었고, 이는 일반적인 정지궤도위성 센서의 노화도인 6 % 내외 값 변화량에 견주어 잘 운용되고 있음을 시사한다. 본 논문에는 천리안위성 기상영상자료의 품질 및 매개변수의 변화 경향도 함께 제시하였으며, 달을 이용한 기상영상기 노화 분석과 보정에 관한 내용을 싣고 있다.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.4 s.42
• /
• pp.181-188
• /
• 2006

In this paper, we propose a search algorithm for similar example-sentences in the computer-aided translation. The search for similar examples, which is a main part in the computer-aided translation, is to retrieve the most similar examples in the aspect of structural and semantical analogy for a given query from examples. The proposed algorithm is based on the Needleman-Wunsch algorithm, which is used to measure similarity between protein or nucleotide sequences in bioinformatics. If the original Needleman-Wunsch algorithm is applied to the search for similar sentences, it is likely to fail to find them since similarity is sensitive to word's inflectional components. Therefore, we use the lemma in addition to (typographical) surface information. In addition, we use the part-of-speech to capture the structural analogy. In other word, this paper proposes the similarity metric combining the surface, lemma, and part-of-speech information of a word. Finally, we present a search algorithm with the proposed metric and present pairs contributed to similarity between a query and a found example. Our algorithm shows good performance in the area of electricity and communication.

• Smart Media Journal
• /
• v.13 no.1
• /
• pp.18-23
• /
• 2024

Power efficiency management in smart farms is important due to its link to climate change. As climate change negatively impacts agriculture, future agriculture is expected to utilize smart farms to minimize climate impacts, but smart farms' power consumption may exacerbate the climate crisis due to the current electricity production system. Therefore, it is essential to efficiently manage and optimize the power usage of smart farms. In this study, we propose a system that monitors the power usage of smart farm equipment in real time and predicts the power usage one hour later using GRU. CT sensors are installed to collect power usage data, which are analyzed to detect and prevent abnormal patterns, and combined with IoT technology to efficiently manage and monitor the overall power usage. This helps to optimize power usage, improve energy efficiency, and reduce carbon emissions. The system is expected to improve not only the energy management of smart farms, but also the overall efficiency of energy use.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.1701-1708
• /
• 2011

A typical day in the subway transportation is used by hundreds of thousands are also concerned about the safety of the various workrooms with high underground fire or other less than in the subway users could be damaging even to be raised and there. In 2010, in fact, room air through vents in the fire because smoke and toxic gas accident victims, and train service suspended until such cases are often reported. In response to these incidents in subway stations, even if the latest IT technology, wireless sensor network technology and intelligent video surveillance technology by integrating fire and structural integrity, such as a comprehensive integrated surveillance system to monitor the development of intelligent urban transit system and are under study. In this study, prior to the application of the monitoring system into the field stations, authors carried out the ZigBee-based wireless sensor networks performance analyzation in the Chungmuro station. The test results at a communications room and ventilation room of the station are summarized and analyzed.

• Korean Journal of Remote Sensing
• /
• v.15 no.2
• /
• pp.119-130
• /
• 1999

At present, many ground stations all over the world are using NORAD orbit element data in order to track and communicate with Earth orbiting satellites. The North American Aerospace Defense Command (NORAD) observes thousands of Earth orbiting objects on daily basis and provides their orbital information via internet. The orbital data provided by NORAD, which is also called two line element (TLE) sets, allows ground stations to predict the time-varying positions of satellites accurately enough to communicate with the satellites. In order to complete the mission of a high resolution remote sensing satellite which requires very high positional determination and control accuracy, however, a mission control and tracking ground station is dedicated for the observation and positional determination of the satellite rather than using NORAD orbital sets. In the case of KITSAT-3, NORAD orbital elements are currently used for image acquisition planning and for the processing of acquired images due to the absence of a dedicated KITSAT-3 tracking ground system. In this paper, we tested and analyzed the accuracy of NORAD orbital elements and the appropriate prediction model to determine how accurately a satellite acquisites an image of the location of interest and how accurately a ground processing system can generate the catalog of the images.

• The Journal of the Acoustical Society of Korea
• /
• v.28 no.3
• /
• pp.229-238
• /
• 2009

This paper describes a sound engine of Korean traditional instruments, which are the Gayageum and Taepyeongso, by using a TMS320F2812. The Gayageum and Taepyeongso models based on commuted waveguide synthesis (CWS) are required to synthesize each sound. There is an instrument selection button to choose one of instruments in the proposed sound engine, and thus a corresponding sound is produced by the relative model at every certain time. Every synthesized sound sample is transmitted to a DAC (TLV5638) using SPI communication, and it is played through a speaker via an audio interface. The length of the delay line determines a fundamental frequency of a desired sound. In order to determine the length of the delay line, it is needed that the time for synthesizing a sound sample should be checked by using a GPIO. It takes $28.6{\mu}s$ for the Gayageum and $21{\mu}s$ for the Taepyeongso, respectively. It happens that each sound sample is synthesized and transferred to the DAC in an interrupt service routine (ISR) of the proposed sound engine. A timer of the TMS320F2812 has four events for generating interrupts. In this paper, the interrupt is happened by using the period matching event of it, and the ISR is called whenever the interrupt happens, $60{\mu}s$. Compared to original sounds with their spectra, the results are good enough to represent timbres of instruments except 'Mu, Hwang, Tae, Joong' of the Taepyeongso. Moreover, only one sound is produced when playing the Taepyeongso and it takes $21{\mu}s$ for the real-time playing. In the case of the Gayageum, players usually use their two fingers (thumb and middle finger or thumb and index finger), so it takes $57.2{\mu}s$ for the real-time playing.