• Informatization Policy
• /
• v.18 no.3
• /
• pp.88-107
• /
• 2011

This paper proposes a prepaid system promotion policy for the 3G(WCDMA) MVNO with regard to the newly included paragraphs 3, 4 and 5 of Article 32 (User Protection) and Article 38 (Provision of Wholesale Telecommunications Services) of the Telecommunication Business Act, which was revised on March 22, 2010. As of June 2011, there are only a few prepaid system subscribers to the mobile communications service due to various limitations, including prepay, interconnection, carrier selection, the MVNO policy, and number portability. However, overseas communications service regulatory agencies and service providers are increasingly presenting policies and strategies for mobile prepaid plans, in order to accommodate the various customer demands that are increasing the use of smart phones and data. This paper advances various proposals concerning promotion of the prepaid system by the 3G MVNO under the current Telecommunication Business Act, including separation of the prepaid data system and the mobile network; introduction of a monthly fixed-rate hybrid prepaid system, a top-up system and USIM system; introduction of mobile network carrier selection; differentiated retail discounts between prepaid and post-paid prices; revision of the retail discount policy for wholesale provision; increase in the number of mandatory service providers; and in-depth consideration of the introduction of a number portability policy for the prepaid and post-paid systems.

• Journal of Astronomy and Space Sciences
• /
• v.20 no.4
• /
• pp.339-350
• /
• 2003

Engineering qualification model payload for a communications and broadcasting satellite(CBS) was developed by ETRI from May, 2000 to April, 2003. For. the purpose of functional test and verification of the payload, a real-time hardware-in-the-loop(HITL) CBS simulator(CBSSIM) was also developed. We assumed that the spacecraft platform for the CBSSIM is a geostationary communication satellite using momentum bias three-axis stabilization control technique based on Koreasat. The payload hardware is combined with CBSSIM via Power, Command and Telemetry System(PCTS) of Electrical Ground Support Equipment(EGSE). CBSSIM is connected with PCTS by TCP/IP and the payload is combined with PCTS by MIL-STD-1553B protocol and DC harness. This simulator runs under the PC-based simulation environment with Windows 2000 operating system. The satellite commands from the operators are transferred to the payload or bus subsystem models through the real-time process block in the simulator. Design requirements of the CBSSIM are to operate in real-time and generate telemetry. CBSSIM provides various graphic monitoring interfaces and control functions and supports both pre-launch and after-launch of a communication satellite system. In this paper, the HITL simulator system including CBSSIM, communications payload and PCTS as the medium of interface between CBSSIM and communications payload will be described in aspects of the system architecture, spacecraft models, and simulator operation environment.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.5
• /
• pp.181-186
• /
• 2019

In order to reduce the fossil fuels consumed in conventional commercial independent diesel generators in the same environment as the island area, it is necessary to develop a photovoltaic system that will bear more than 40% of the independent system capacity. For this development, it is necessary to develop a high-capacity inverter that can improve the stability of the independent system installed in the island area and supply high-quality power to the load. In addition, the EMS power generation control system for the independent grid photovoltaic power generation system is a parallel operation power control system of the diesel generator connected with the solar power generation system. It controls the output of the diesel generator according to the load ratio and the solar power generation, A stable supply system is needed. This independent grid photovoltaic generation system can increase the solar power supply to the independent system area and increase the power stability of the independent system and further reduce the use of fossil fuel due to the ineffective power control of the independent system. It is expected that the economy will be secured early.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.3
• /
• pp.537-546
• /
• 2019

In this paper, a system that integrates a home concentrate unit(HCU) in a smart electricity meter to collects water, gas, hot water, and heating usage required for AMI has been proposed. The collected data could be transmitted to the in house display(IHD) and server to provide a more economical AMI system. The developed system is less expensive in the network configuration than the existing system, which could reduce the operating cost, and be easy to install. By applying the developed system, the usage of electricity, water, gas, hot water and heating could be measured and these make it easier to apply AMI system. The main contents of the development are the smart electricity meter and embedding of HCU into the smart electricity meter, and transferring these data to IHD and server to structure the AMI system. The each developed unit has been networked to structure the AMI system to perform the actual meter reading operation and show the result.

• JOURNAL OF ELECTRICAL WORLD
• /
• s.314
• /
• pp.58-63
• /
• 2003

휴대전화, PC, 브로드밴드(ADSL, FTTH) 등 가정 내에서의 IT기기 및 네트워크의 보급이 급속하게 진전되고 있다. TV와 에어콘 등 가전제품의 IT화가 진행되어 가정 내에서 네트워크를 형성함은 물론 외부 네트워크에 상시 접속되는 세계가 실현되어 가고 있다. 네트워크 접속에 대응하는 네트가전이 보급되면 가전기기 간의 연대 및 외부와의 정보통신에 의해 가전제품의 기능과 성능을 최대한으로 발휘할 수 있게 되어 생활환경, 편리성이 크게 향상됨과 아울러 성(省)에너지화에도 큰 효과를 나타낸다. 네트가전은 TV, VTR, DVD등의 AV계(系), 냉장고와 세탁기 등의 기기계, 태양광발전시스템과 전기온수기 등의 설비계로 분류된다. AV계에서는 디지털정보의 다운로드와 기억에 의해 다양한 고품질의 영상음향에 둘러싸인 세계가 탄생하게 된다 기계계의 네트가전에서는 홈서버 경유로 외출 장소에서 기기의 상태를 파악하여 제어하는 것이 가능해진다. 설비계에서는 설비 간의 연대에 따라 에너지절약 운전과 최대전력량의 제어에 의한 코스트절약이 실현된다. 네트가전을 이용한 홈네트워크 실현을 위해서는 고객이 쉽게 다를 수 있으며 만족할 수 있는 기능과 서비스, 성(省)배전$\cdot$저(低)코스트의 네트워크, 기기가 외부에서 간단히 제어될 수 있는 고신뢰성 인터페이스의 실장(實裝)과 표준화, 디지털 컨텐츠의 유통을 촉진하기 위한 컨텐츠 권리보호제도 정비가 필요하게 된다. 미쓰비시전기는 ''언제나, 어디에나, 누구에게도'' 가전제품을 편리하게 사용될 수 있는 유비쿼터스 사회를 실현하기 위하여 AV, 설비$\cdot$기기, 컴퓨터의 모든 분야에 대응한 가전기기, 네트워크 관련기기의 개발을 진행해 나감은 물론 주택을 이용한 실증시험을 실시하여 소비자 메리트의 본질적인 추구를 위해 계속 추진해 나가고 있다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2023.05a
• /
• pp.280-281
• /
• 2023

Wireless communication in marine environments requires a significant amount of power for long-range communication, resulting in high energy consumption. Moreover, the numerous constraints in marine environments make it difficult to apply existing wireless communication technologies, necessitating the development of new technologies to address these issues. This paper investigates beam selection technology for marine environments, which reduces overall power consumption and minimizes interference between signals by selecting and transmitting necessary beams for communication in a specific area, enabling better quality communication. We validate the energy efficiency of the beam selection technology through simulations and compare it with existing wireless communication technologies. The results show that beam selection technology consumes less power and provides better communication quality than existing wireless communication technologies. Therefore, beam selection technology plays a critical role in establishing efficient communication systems in marine environments, and its application can improve communication quality over a broader area.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.2 s.54
• /
• pp.3-12
• /
• 2005

안테나를 소형화하면 안테나의 복사효율이 저하되고, 대역폭이 좁아지며, 안테나 이득이 작아진다는 사실은 잘 알려져 있다. 그러나 이런 전기적 성능저하에도 불구하고 최근 무선통신 시스템의 소형화와 고성능화에 따라 안테나의 소형화 및 광대역화가 끊임없이 요구되고 있다. 여기서는 이런 요구에 부응하기 위하여 소형 안테나의 종류와 소형화시 나타나는 문제점을 확인하고 선형 안테나와 평판 안테나를 중심으로 소형화 및 광대역화 기법을 소개하고 고찰하였다.

• The Science & Technology
• /
• v.31 no.5 s.348
• /
• pp.28-29
• /
• 1998

2차 세계대전 중 영국 공군에서 레이더 시스템 개발에 종사하던 한 젊은 기술장교가 1945년 통신전문지 「와이어레스 월드」에서 미래를 내다보는 획기적인 논문을 발표하여 세상을 깜짝 놀라게 만들었다. 아더 찰즈 크라크(Arther Charles Clark)라는 이름의 이 장교는 당시에는 존재조차 하지 않았던 인공위성을 이용하여 세계를 전기통신망으로 묶는 방법을 자상하게 논술한 것이다. 그로부터 반세기가 지난 오늘날 수백기의 인공위성들이 지구 궤도를 돌면서 정보화 시대의 대들보 구실을 하고 있다.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.07a
• /
• pp.22-23
• /
• 2003

광섬유 가변 감쇠기는 광증폭기, add／drop 모듈, Mux／Demux, 광송수신기 등 중요한 광통신 시스템의 입력 및 출력 광신호 레벨을 적절하게 제어하기 위해 요구되는 중요한 소자이다. 가변 감쇠기는 높은 신뢰성, 높은 해상도, 작은 삽입손실, 낮은 편광 및 파장 의존성 손실 등이 요구되어 진다. 가변 광감쇠기는 평면 기판에 형성된 도파로 의 열광학 효과나 전기광학 효과를 이용하는 기법과 MEMS 기술에 기초한 방법이 잘 알려져 있다. (중략)

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.3
• /
• pp.62-68
• /
• 2007

The increasing use of power electronic equipment in distribution system has been the reason for the greater concern about a harmonic in recent time. Therefore, it is necessary for measurement and modelling to analyze a harmonic level and a transfer characteristic in distribution system. In this paper, the Point of Common Coupling (PCC) is selected to analyze harmonic characteristic of distribution system by IEC 61000-3-6. Harmonic voltage and orient were measured at the PCC of real distribution system Harmonic distribution, nonlinear load component and Total Harmonic Distortion(THD) were verified. The effective and accurate modelling of real distribution system were proved through a analysis of harmonic impedance, voltage and current under steady-state. Harmonic transfer characteristic were investigated through a analysis of harmonic voltage and current under harmonic current source.