• Title/Summary/Keyword: 전기철도차량

Search Result 356, Processing Time 0.022 seconds

Harmonic Analysis and its countermeasure of AT feeding scheme on AC electric railway (교류전기철도 AT급전개통의 고조파 해석 및 적용사례)

  • Lee, Chang-Mu;Han, Moon-Seub;Lee, Han-Min;An, Young-Noon
    • Proceedings of the KIEE Conference
    • /
    • 2003.04a
    • /
    • pp.405-408
    • /
    • 2003
  • 국내철도는 많은 철도선로를 전철화하고 있다. 25kV-60Hz 전철화구간에서 운행하는 전기차량으로 인하여 고조파에 대한 문제가 있다 이를 해결하기 위하여 AT급전방식에서의 고조파 특성을 해석하고 차량에서 발생하여 변전소로 유입되는 고조파를 저감시키기 위한 대책설비가 필요하다 여기에서는 지금까지 고조파 해석에 사용된 3종류의 고조파 해석모델과 기존선 전철화 과정에서 고조파 대책설비 설계에 대한 3가지 예를 보인다.

  • PDF

정부시책

  • Korea Electrical Manufacturers Association
    • NEWSLETTER 전기공업
    • /
    • no.97-11 s.180
    • /
    • pp.8-13
    • /
    • 1997
  • PDF

Cases of applying battery to rolling stock (철도차량용 축전지 적용 사례)

  • Kim, Sang-Woong;Kim, Shin-Gug;Ahn, Hong-Kwan;Kim, Jea-Gi
    • Proceedings of the KSR Conference
    • /
    • 2011.05a
    • /
    • pp.413-422
    • /
    • 2011
  • A battery is an important part of the component, as a power source of the control of rolling stock at starting movement or emergency control. Now widely used batteries are Ni-Cd batteries and lead accumulators, and these are increasingly getting smaller and lighter. In addition, the electric capacity required is increasing, due to the development of electronic control technology of rolling stock. Therefore, various kinds of high-efficiency battery are considered for the new routes' rolling stock, but rolling stock's batteries should be fully tested to prove safety and also have no difficulty in terms of management, so because of the requirement, it is difficult to be in practical application. In this paper, we will survey cases of applying battery to rolling stock and then we will review whether there is any problem about safety and performance, management to discuss future trend of batteries.

  • PDF

A Study on the Application of UPQC in AC Railway System (교류철도급전계통에 전력품질보상장치 적용에 관한 연구)

  • Choi, Joon-Ho
    • Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
    • /
    • v.18 no.6
    • /
    • pp.220-229
    • /
    • 2004
  • The AC railway system is quite differing from the general electric power system because it is single- phase and intermittently heavy loads. Thus, inevitably power quality problems are occurred in the AC railway system, i.e. voltage regulation voltage sags, voltage imbalance, and harmonic distortion. Recently, the power quality of the AC railway system becoming a hot issue because it is affect the control and safety of high-speed traction. In addition it is also affect the power quality of the electric power system. In this paper, single-phase Unified Power Quality Conditioner(UPQS) for the AC railway system is proposed to compensate the voltage sags and harmonic distortion. The configurations and control schemes of the proposed single-phase UPQC are presented. The effectiveness of the proposed single-phase UPQC application is verified by the PSCAD/EMTDC simulation works. It can be shown that the application of UPQC in the AC railway system is very useful to compensate the voltage sags and harmonic distortion from the results of related simulation works.

Development of Economical Run Model for Electric Railway Vehicle (전기철도차량 경제운전 모형 개발)

  • Lee Tae-Hyung;Hang Hee-Soo
    • Journal of the Korean Society for Railway
    • /
    • v.9 no.1 s.32
    • /
    • pp.76-80
    • /
    • 2006
  • The Optimization has been performed to search an economical running pattern in the view point of trip time and energy consumption. Fuzzy control model have been applied to build the meta-model. To identify the structure and its parameters of a fuzzy model, fuzzy c-means clustering method and differential evolutionary scheme are utilized, respectively. As a result, two meta-models for trip time and energy consumption were constructed. The optimization to search an economical running pattern was achieved by differential evolutionary scheme. The result shows that the proposed methodology is very efficient and conveniently applicable to the operation of railway system.

고속전철의 세계적 기술개발 현황과 한국형 고속전철

  • 이종찬
    • 전기의세계
    • /
    • v.38 no.6
    • /
    • pp.12-18
    • /
    • 1989
  • 한국형 고속전철을 고려하는데 있어서 위에서의 기술적인 측면보다도 오히려 수송용량, 경제성, 운영방식의 측면에서 더 많은 비중을 두고 검토해야 하는지도 모른다. 그러한 측면에서 한국형 고속전철은 한국의 지형조건, 경부간의 연변인구, 현경부선의 장래, 고속전철의 운영방식, 한국철도의 기술수준 등을 고려하지 않으면 안되고 한국형이어야 한다. 한국형 고속전철은 1. 경부간 고속전철의 거리는 380Km정도이므로 2000년대의 국민 일인당 시간가치를 기준으로 최고속도를 결정하여야 하고 표정속도는 190Km/h이상이어야 한다. 2. 고속화를 위한 필수조건인 차량의 축중을 17톤 이하로 제한하여야 하고 기존의 철도차량이 고속전철선에 야간열차등으로 투입되더라도 이 원칙은 유지되어야 한다. 3. 수송능력을 확보하기 위하여 열차편성당 좌석수는 800석 이하로 확보되어야 한다. 4. 기존선에서의 연장운행이 불가피하므로 기존선의 차량한계 내에서 안전하게 운행될 수 있어야 하고 전력공급은 기존선 방식인 A/C25KV, 60HZ의 사용이 불가피하다. 5. 고속전철의 건설비용, 차량의 제작비, 기술이전도, 국산화율 등을 고려한 시스템이어야 한다. 한국형 고속전철은 위의 기본원칙을 최소한 만조시킬 수 있는 시스템이어야 한다.

  • PDF

A Study on Fault Diagnosis Using the Vehicle Signal (차량신호를 이용한 고장진단에 관한 연구)

  • Han, Young-Jae;Kim, Ki-Hwan;Park, Chan-Kyoung;Lee, Su-Gil;Jang, Young-Min;Min, Pyoung-Oh
    • Proceedings of the KIEE Conference
    • /
    • 2004.10a
    • /
    • pp.242-244
    • /
    • 2004
  • 현재, 고속철도차량의 국내기술확보를 위해 한국형 고속전철이 개발되어 단품시험, 완성차시험, 공장시험 등을 통해 기본적인 성능을 확인한 후 현재는 본선시운전 시험을 실시하고 있다. 시제차량의 성능 및 기능을 종합적이고 효율적으로 확인하기 위해 고속철도 시운전시험시 상시 계측시스템을 시제차량에 설치하여 운영하고 있다. 본 논문에서는 상시계측시스템을 이용하여 보조전원장치에 대한 고장진단을 실시한 것에 대하여 기술하였다.

  • PDF

Optimal Economical Running Patterns Based on Fuzzy Model (철도차량을 위한 퍼지모델기반 최적 경제운전 패턴 개발)

  • Lee, Tae-Hyung;Hwang, Hee-Soo
    • Journal of the Korean Institute of Intelligent Systems
    • /
    • v.16 no.5
    • /
    • pp.594-600
    • /
    • 2006
  • The optimization has been performed to search an economical running pattern in the view point of trip time and energy consumption. Fuzzy control model has been applied to build the meta-model. To identify the structure and its parameters of a fuzzy model, fuzzy c-means clustering method and differential evolutionary scheme ate utilized, respectively. As a result, two meta-models for trip time and energy consumption are constructed. The optimization to search an economical running pattern is achieved by differential evolutionary scheme. The result shows that the proposed methodology is very efficient and conveniently applicable to the operation of railway system.