• Korean Chemical Engineering Research
• /
• v.51 no.5
• /
• pp.622-627
• /
• 2013

Colloidal silica is used in various industrial products such as chemical mechanical polishing slurry for planarization of silicon and sapphire wafer, organic-inorganic hybrid coatings, binder of investment casting, etc. An accurate determination of particle size and dispersion stability of silica sol is demanded because it has a strong influence on surface of wafer, film of coatings or bulks having mechanical, chemical and optical properties. The study herein is discussed on the effect of measurement results of average particle size, sol viscosity and electrophoretic mobility of particle according to the volume fraction of eight types of silica sol with different size and surface properties of silica particles which are presented by the manufacturer. The measured particle size and the mobility of these sol were changed by volume fraction or particle size due to highly active surface of silica particle and change of concentration of counter ion by dilution of silica sol. While in case the measured sizes of small particles less than 60 nm are increased with increasing volume fraction, the measured sizes of larger particles than 60 nm are slightly decreased. The mobility of small particle such as 12 nm are decreased with increase of viscosity. However, the mobility of 100 nm particles under 0.048 volume fraction are increased with increasing volume fraction and then decreased over higher volume fraction.

• Resources Recycling
• /
• v.31 no.3
• /
• pp.61-72
• /
• 2022

We investigated the electrochemical behavior of Sn (93.0 %)-Ag (4.06 %)-Cu (0.89 %) during electrolysis of Pb-free solder waste to recover tin and silver. A thin strip of the solder waste produced by high-temperature melting and casting was used as a working electrode to perform electrochemical analysis. During anodic polarization, the current peak of an active region decreased with an increase in the concentration of sulfuric acid used as an electrolyte. This resulted in the electro-dissolution of the working electrode in the electrolyte (1.0 molL^-1 sulfuric acid) for a constant current study. The study revealed that the thickening of an anode slime layer at the working surface continuously increased the electrode potential of the working electrode. At 10 mAcm^-2, the dissolution reaction continued for 25 h. By contrast, at 50 mAcm^-2, a sharp increase in the electrode potential stopped the dissolution in 2.5 h. During dissolution, silver enrichment in the anode slime reached 94.3% in the 1 molL^-1 sulfuric acid electrolyte containing a 0.3 molL^-1 chlorine ion, which was 12.7% higher than that without chlorine addition. Moreover, the chlorine enhanced the stability of the dissolved tin ions in the electrolyte as well as the current efficiency of tin electro-deposition at the counter electrode.

• Archives of design research
• /
• v.17 no.4
• /
• pp.241-250
• /
• 2004

In this research, the copper alloy plates C2200, C5210, C7701, C8113 were selected to make datum and to identify further usage of metal craft experimentation. For its experimentation, the general welding and TIG welding methods were researched; for 2nd experimentation, the Reticulation and Electroforming skill's differences in color and temperature were researched. With these methods 3 different kinds of works are introduced for sample studies. For this research, Dr. Lee, Dong-Woo who works in Poongsan Metal Co, supported 4 kinds of copper alloy metals. Which are Commercial bronze (Cu-Zn), Deoxidiged Copper(Cu-Sn-P), Nickel Silver (Cu-Ni-Zn), and White Bronze (Cu-Ni); they were applied partly and wholly by the method of Laminatin, Reticulation, Fusing, and Electroforming skills. In case of C2200, the brass, the A. C. TIG welding method is better under 2mm slight plate; the D.C. TIG welding is better upper 2mm plate; and 250~300$^{\circ}C$ is recommended for remain heat treatment. In case of C5210, not having Hydrogen in high temperature return period, doesn't need Oxygen in high temperature and hardening in comparative high temperature neither, it is good for welding. It contains Sn 2-9% ad P 0.03-0.4% generally; and in accordance with the growth rate of Sn contain amount, the harden temperature boundary become broad. In case of cold moment after welding, they are recommended that higher speed TIG welding, smaller melting site and less than 200$^{\circ}C$ for pre-heating temperature. In case of C7701, the 10-20% Ni, 15-30% Zn are widely used.. If it is upper 30% Zn, it become (${\alpha}+{\beta}$) system and adhesive power rate become lower, and the productivity become lower in low temperature but the productivity become higher in high temperature. Nickel Silver's resistance of electricity is well; and the heatproof and incorrodibility is good, too. Lastly, in case of C8113, good at persistence in salty and grind; high in strength of high temperature. In case of white brass, contain 10-30% Nickel and hardened in high temperature and become single phrase. For these reason, the crystallization particles easily become large, if the resistance become higher small amount of Pb, P, S separation rate become higher.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.35 no.2
• /
• pp.146-150
• /
• 1990

This study was conducted to investigate the genetic analysis of esterase isozymes in maize with tillers. The materials used for the study were stele tissue for five day old seedlings of IK inbred line with tiller and A-type inbred line with no tiller, their Fl and F,. The methods employed for the study were same as previous report by Lee and Choe. A total of thirteen isoesterase enzyme bands were identified and five zones were distinguised according to both migration distance and genetic segregation patterns. The E$\sub$0.3/, E$\sub$0.4/ and E$\sub$0.5/ loci appeared from orgin to 0.5cm migration distance were controlled by the two alleles in (IK/A-type)F$_2$ and the E$\sub$0.3/+E$\sub$0.4/ of variants was controlled by codominant alleles. The E$\sub$1.0/, E$\sub$1.2/, E$\sub$1.5/ and E$\sub$1.8/ loci appeared from 1.0cm to 1.8cm were also controlled by the two alleles. However, the null band was functioned alleles. The E$\sub$2.8/, E$\sub$3.0/ and E$\sub$3.5/ loci appeared from 2.8cm to 3.5cm migration distance were very active and near location. A total of individuals with two paried bands of these loci were more than those of three paired bands(x$^2$=0.327$\^$**/). The activity of bands appeared over 3.8cm were very low and these were controlled by the two alleles. In above results, genetic segregations of stele tissue of maize with tillers were suggested to be controlled by Mendelian genetic laws.

• Journal of the Korean Ceramic Society
• /
• v.41 no.9
• /
• pp.709-714
• /
• 2004

The additive of low temperature sintering in Mn-doped PMN-PZT known as high piezoelectric materials was studied in this experiment. B$_2$O$_3$ was used for the additive of low temperature sintering. The effects of sintering temperature in dielectric, and piezoelectric properties were investigated with the amounts of B$_2$O$_3$. Sintered density was increased in comparison with no addition and under 2wt％ B$_2$O$_3$ and lower sintering temperature than 100$0^{\circ}C$. Therefore, in the low sintering temperature, the densification was improved by the addition of the B$_2$O$_3$. However, the sintering density was lower than that of the main composition in the case of the sintered at over 10$50^{\circ}C$. Dielectric constant with the addition of B$_2$O$_3$ was evaluated. The dielectric constant was 1000 2 wt％ of B$_2$O$_3$ and sintered at 100$0^{\circ}C$. Under 2wt％ of B$_2$O$_3$, the electromechanical coupling factor and the piezoelectric constant were not so much decreased. The electromechanical coupling factor and the piezoelectric constant were 50％ and 300(${\times}$10$^{-12}$ C/N) respectively. The mechanical quality factor was increased with B$_2$O$_3$. The mechanical quality factor was 1700 at 0.5wt％ B$_2$O$_3$ and sintered at 110$0^{\circ}C$. Dielectric loss was less than 0.5％ regardless of the amount of B$_2$O$_3$.

• The Journal of Korean Academy of Prosthodontics
• /
• v.34 no.4
• /
• pp.791-799
• /
• 1996

The purpose of this study was to compare the shear bond strength of adhesion bridge by various resin cements. One hundred and foully 1st premolars were used. The teeth were cut below 2mm from CEJ and the coronal portions were used. The coronal portions were embeded with the acrylic resin and trimmed with sic paper until the flat plane with ${\phi}$ 4mm above acrylic resin sticks in height 5mm were casted with nonprecious metal and the using surfaces were treated with sic paper from #200 to #1200 and polished with alminum oxide paste. And then, the using surfaces were sandblasted and treated with the electrochemical etching. The teeth were divided into three groups of fourty two each. In group I, teeth and specimens were cemented with Panavia 21 In group II, teeth and specimens were cemented with Superbond In group I, teeth and specimens were cemented with All-Bond & composite resin cement Each group was subdivided into three subgroups according to the storage period ; one-day storage, fifteen-day storage, and thirty-day storage. The special jig was made. Then, the specimen and jig were mounted to Instron Universal Testing Machine and the failure were measured. The results were as follows. 1. There was statisfically significant difference between the failure loads of group I and group II and III after one day storage(P<0.01), 2. There was statisfically significant difference between the failure loads of group II and group I and III and between group I and group III at fifteen day storage(P<0.01). 3. There was statisfically significant difference between the failure loads of group I and II and group III after thirty day storage(P<0.01). 4. There was statisfically significant difference between the failure loads of one day storage and fifteen and thirty days storages in group III (P<0.01).

• (The)Study of the Eastern Classic
• /
• no.49
• /
• pp.225-260
• /
• 2012

The poetry of Haseo Jo Gyeong is first characterized by its fantasy content with mysterious and strange beings such as mountain wizards, gods of flowers, ghosts, Jujos and dragons. Such works imply the huge gap between his political ideal of Neo-Confucianism and the reality of society and are expressions of his resulting sorrow. Of course, he did not just look at reality pessimistically. Like other Neo-Confucianism scholars, he used the symbol of "spring" in his poems, which indicates that he did have optimistic belief in the world in spite of despair. In his poems, the symbol of "spring" implies the political world where the noble man grabbed the power and the sinister groups were extracted or the world where the political ethics of Neo-Confucianism was implemented. His works depicting the essence of natural objects, mountains, and rivers exhibit the characteristics of his poetry more clearly. He described the law of the universe behind natural objects and the vibrant aspects of natural objects by depicting their movements in a clear and sharp manner. Unlike the old Neo-Confucianism scholars that often created poems on the topic of acquirement of natural law and nature, he expanded his poetic world in a direction of revealing the secrets of objects. His works describing the spirit of mountains and rivers are especially noteworthy in that they implied a life attitude of moving forward in an deteriorating world bravely by manifesting strong and dynamic power. Paying attention to the secrets of natural objects, Haseo displayed his life ideal in richer ways by painting the new forms of ume flowers. Unlike the old ume flowers poems in the past, his ume flowers poems present ume flowers as ascetics that obtained truth, men of virtue that inspired contemporary people, or retired gentlemen that revealed the profound secrets of nature. While it is unique that he manifested the forms of ume flowers in ascetics and men of virtue while perceiving the dark reality of society, it is more noteworthy that he described ume flowers as the beings revealing the profound secrets of nature. It was the expression of his yearning for an innocent personality and his fear for losing the personality, clearly depicting a human form of his ego. He created a more human and realistic personality ideal by embracing the contemporary thinking based on the profound secrets of nature in his Dohak poetry[道學詩], which is a significant achievement in that it showed new changes to Dohak poetry in the 18th century.