• Polymer(Korea)
• /
• v.27 no.3
• /
• pp.189-194
• /
• 2003

Interfacial evaluation, damage sensing and cure monitoring of single carbon fiber/thermo setting composite with different curing processes were investigated using electro-micromechanical test. After curing, the residual stress was monitored by measurement of electrical resistance and then compared to various curing processes. In thermal curing case, matrix tensile strength, modulus and interfacial shear strength were higher than those of ultraviolet curing case. The shrinkage measured during thermal curing occurred significantly by matrix shrinkage and residual stress due to the difference in thermal expansion coefficient. The apparent modulus measured in the thermal curing indicated that mechanical and interfacial properties were highly improved. The reaching time to the same stress of thermal curing was faster than that of UV curing case.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.11a
• /
• pp.13.2-13.2
• /
• 2009

전도성 고분자는 재료의 경제적 측면 이외에 반도체로서의 다양한 전기적 특성, 생물학적 적합성, 다양한 합성 가능성 등의 우수한 장점을 지니고있어 많은 분야에 응용되고 있다. 그러나 유기물질이라는 한계로 인하여 기존 nano/microfabrication에서 일반적으로 적용되는 패터닝 방법을 적용하는데 어려움이있다. 따라서 많은 연구자들이 독립적인 나노 크기 개체를 만든 후 이의 자가 조립, 혹은 이와 유사한 방법에 의해 소자를 형성하고자 하는 노력을 기울이고 있다.이러한 bottom-up방식에 의한 소자 구성은 나노크기의 전도성 고분자 물질을 소자화하는데에는 성공하고 있으나, 복잡한 패터닝과 다양한 크기의 나노구조체를 정확한 위치에 정렬시키는 문제에 있어서 명확한 해답을 제시하지 못하는 실정이다. 본 연구에서는 현재 보편적으로 이용되고 있는 금속의nano/microfabrication공정과 전도성 폴리머의 전해합성를 복합화하여 고정밀도 및 다양한 패턴의 나노 소자를 구현하고자하였다. 이를 위하여 전해합성 조건에 따른 polypyrrole의전기적 특성을 평가하였으며, 하부 금속전극관의 복합적층화를 통한 접촉저항의 최소화를 구현하고자 하였다. 또한 이와 같은 self-alignedelectropolymerization방법을 이용하여 구성된 nano/micro 소자의 gas sensor 및 bio sensor로서의 적용가능성에 대하여평가하였다.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2005.05a
• /
• pp.71-76
• /
• 2005

The subject of this paper is research into the application of resistivity/SP monitoring to detecting the water leakage of water utilization facilities. For this purpose, we installed a comprehensive monitoring system consisting of resistivity/SP measurement, inclinometer, piezometer, and water gauge at an embankment, Using this monitoring system, we monitored the various kinds of measurement data and compared the resistivity structures and SP variations that of hydrological and engineering data in order to investigate the water leakage and stability of the embankment. The variations of resistivity and SP at the embankment were provided from the monitoring data and we could accurately locate the portions of which resistivities and SP have sharply changed, Furthermore, we could estimate the stability of the embankment more effectively and quantitatively by jointly interpreting the monitoring data of resistivity and SP, water level, pore water pressure, and subsurface displacement. The monitoring experiments in this study led us to the conclusion that for the efficient maintenance of the water utilization facilities, monitoring the resistivity and SP data would be much more preferable to performing the just one-time measurements.

• The Journal of Korean Association of Computer Education
• /
• v.17 no.2
• /
• pp.65-76
• /
• 2014

This paper aims at implementing experimental devices with which middle school students can explore scientific ideas using GoGo Board and NetLogo that connect real and simulated worlds. Related research literature was reviewed to design a simulation-based learning model using computer simulation and robot-related activities. In order to construct devices for exploratory experiments, GoGo Board was adopted for developing the interface of Micro-Based Laboratory(MBL) devices with several sensors while NetLogo was used for connecting MBL devices (real world) and simulated experiments (virtual world). The simulation contents were developed in the area of heat equilibrium for changing temperature and the conduct-current relationship appeared in the textbook of middle school science class. With the developed device and contents students can visualize the change of temperature cold and hot waters in terms of heat equilibrium. They also can measure the change of conductor representing the relationship between conductor and current. The formative evaluation of the contents carried out with several middle school students indicated the future direction for upgrading simulation contents and interface. The results might be beneficial for science educators who want to apply simulation contents with the use of computers.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1999.07a
• /
• pp.185-190
• /
• 1999

대부분의 물질에 함유된 수분은 물질의 중요한 구성성분중의 하나이며 특히 농산물이나 식품 등에 함유된 수분은 각 품질을 평가하기 위한 중요한 인자중의 하나이다. 각종 농산물 및 식품가공공정 뿐만 아니라 저장단계에서 원료의 수분함량을 신속 정확하게 측정할 수 있는 시스템의 개발이 요구되고 있다. 이러한 원료의 수분함량을 간접적으로 측정하는 방법으로서 주로 전기저항, 고주파 정전용량, 근적외선, 마이크로파 등이 이용되고 있다. (중략)

• Applied Chemistry for Engineering
• /
• v.20 no.6
• /
• pp.622-627
• /
• 2009

Using an alkali-solution developable photosensitive resin and a carbon black as a conductive filler, photo-patternable pastes for polymer thick film resistor were fabricated and evaluated. A photo solder resist (PSR), which is usually used as protecting layer of printed circuit board (PCB), was used as a photosensitive resin so that ultraviolet exposure and alkali-aqueous solution development of paste were possible. After fabricating the photosensitive polymer resistor paste, the electrical properties of thick film resistors were measured using PCB test boards. Sheet resistance was decreased with increasing amount of carbon black, but the developability was limited in excess loading of carbon black. The sheet resistance was also reduced by re-curing and the change rate was smaller in higher carbon black loading. Moreover, finely patterned meander-type thick film resistors were fabricated using photo-process and large resistance up to several tens of sheet resistance could be obtained in small area by this technique.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.3
• /
• pp.51-56
• /
• 2005

Ground resistance measurement is an elementary technique for the evaluation of grounding system. There are main environmental factors to consider for correct measurement, but the problem is that it is practically most cases to measure ground resistance unable to know the factors. This paper presents a methodology toward true value of resistance in the unknown circumstance, utilizing the defined term, 'variation rate' of potential difference curve appearing in the distance to a current probe as in the three point fall-of-potential method which comprises the characteristics of environmental factors. This methodology is a induced result from the previous demostrated studies.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.1 no.1
• /
• pp.107-114
• /
• 1998

Purpose: The purpose of our study is to provide useful information for me-asurement methods of childhood obesity and to provide clinical significance of bioelectrical impedance analysis. Methods: We measured height, weight, waist to hip ratio, skinfold thickness and bioelectrical impedance from 206 elementary students in Kwangju from May to July 1997. Results: In males; 1) There were statistically high correlations between tri-ceps skinfold thickness and body mass index (BMI), percentage of body fat (%BF), weight, Rohler index (RI), total fat weight (TFW), waist to hip (W/H) ratio, height, lean body mass (LBM) (all, p<0.001). 2) There were statistically high correlations between subscapular skinfold thickness and BMI, RI, weig-ht, %BF, TBW (all, p<0.001). 3) There were statistically high correlations between %BF and BMI, triceps skinfold thickness, RI, TFW, subscapular skinfold thickness, weight (all, p<0.001). In females; 4) There were statistically high correlations between triceps skinfold thickness and BMI, weight, LBM, height, %BF (all, p<0.001). 5) There were statistically significant correlations between subscapular skinfold thickness and BMI, weight, LBM, RI, height. 6) There were statistically high correlations between percentage of body fat and BMI, RI, triceps skinfold thickness. The percentage of body fat according to the bioelectrical impedance analysis highly correlated with that calculated by skinfold thickness in males (r＝0.57, p<0.01) and in females (r＝0.30, p<0.01). Conclusion: The results of our study suggests that bioelectrical impedance analysis is a useful method of estimating body fat in the childhood obesity.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2003.06b
• /
• pp.141-152
• /
• 2003

터널 설계를 위한 조사 있어서, 요사이 시추공 조사는 물론 탄성파 탐사, 전기 비저항 탐사 등의 물리탐사가 빈번히 행해지고 있는 실정이다. 따라서 최적의 지반평가(암반 등급 등)를 위해 조사에서 얻어지는 모든 자료를 체계적으로 최대한 활용할 수 있는 방법이 절실히 요구되고 있다. 많은 연구자들이 정량적 데이터가 부족한 경우에 대처하기 위해 정상적 데이터의 이용을 적극 제안해 왔다. 본 연구에서는 신뢰도가 다른 두 종류의 자료, 즉 시추공자료와 물리탐사 자료를 활용하여 시추가 되지 않은 구간의 암반등급을 추정하는 방법을 지구통계학적 이론에 근거하여 소개하고자 한다.

• Geophysics and Geophysical Exploration
• /
• v.10 no.4
• /
• pp.353-360
• /
• 2007

We practiced fresh water injection test to identify its applibility as a method of seawater intrusion mitigation technique, and monitored the change of borehole fluid conductivity and the behavior of injected fresh water using borehole multichannel electrical conductivity monitoring and well-logging, and DC resistivity and SP monitoring at the surface. Well-logging and multichannel EC monitoring showed the decrease of fluid conductivity due to fresh water injection. We note that such an injection effect lasts more than several month which means the applibility of fresh water injection as a seawater intrusion control technique. Although SP monitoring did not show meaningful results because of weather condition during monitoring and the defects of electrodes due to long operation time, DC resistivity monitoring showed its effectiveness and applicability as a monitoring and assessment techniques of injection test by means of imaging the behavior and the front of fresh water body in terms of the increase of resistivity with reasonable resolution. In conclusion, we note that geophysical techniques can be an effective method of monitoring and evaluation of fresh water injection test, and expect that fresh water injection may be an practical method for the mitigation of seawater intrusion when applied with optimal design of injection well distribution and injection rate based on geophysical evaluation.